From: Bai Ping <ping.bai@nxp.com>
To: shawnguo@kernel.org, mturquette@baylibre.com,
sboyd@codeaurora.org, robh+dt@kernel.org, mark.rutland@arm.com,
linus.walleij@linaro.org
Cc: devicetree@vger.kernel.org, kernel@pengutronix.de,
daniel.lezcano@linaro.org, linux-gpio@vger.kernel.org,
p.zabel@pengutronix.de, jacky.baip@gmail.com,
fabio.estevam@nxp.com, tglx@linutronix.de,
linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 06/12] driver: pinctrl: imx: Add pinctrl driver support for imx6sll
Date: Tue, 27 Dec 2016 17:47:44 +0800 [thread overview]
Message-ID: <1482832070-22668-7-git-send-email-ping.bai@nxp.com> (raw)
In-Reply-To: <1482832070-22668-1-git-send-email-ping.bai@nxp.com>
Add pinctrl driver support for imx6sll.
Signed-off-by: Bai Ping <ping.bai@nxp.com>
---
arch/arm/mach-imx/Kconfig | 1 +
drivers/pinctrl/freescale/Kconfig | 7 +
drivers/pinctrl/freescale/Makefile | 1 +
drivers/pinctrl/freescale/pinctrl-imx6sll.c | 385 ++++++++++++++++++++++++++++
4 files changed, 394 insertions(+)
create mode 100644 drivers/pinctrl/freescale/pinctrl-imx6sll.c
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 33bcfda..c907d9f 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -514,6 +514,7 @@ config SOC_IMX6SL
config SOC_IMX6SLL
bool "i.MX6 SoloLiteLite support"
+ select PINCTRL_IMX6SLL
select SOC_IMX6
help
diff --git a/drivers/pinctrl/freescale/Kconfig b/drivers/pinctrl/freescale/Kconfig
index fc8cbf6..93ca39f 100644
--- a/drivers/pinctrl/freescale/Kconfig
+++ b/drivers/pinctrl/freescale/Kconfig
@@ -81,6 +81,13 @@ config PINCTRL_IMX6SL
help
Say Y here to enable the imx6sl pinctrl driver
+config PINCTRL_IMX6SLL
+ bool "IMX6SL pinctrl driver"
+ depends on SOC_IMX6SLL
+ select PINCTRL_IMX
+ help
+ Say Y here to enable the imx6sl pinctrl driver
+
config PINCTRL_IMX6SX
bool "IMX6SX pinctrl driver"
depends on SOC_IMX6SX
diff --git a/drivers/pinctrl/freescale/Makefile b/drivers/pinctrl/freescale/Makefile
index d44c9e2..5f23765 100644
--- a/drivers/pinctrl/freescale/Makefile
+++ b/drivers/pinctrl/freescale/Makefile
@@ -11,6 +11,7 @@ obj-$(CONFIG_PINCTRL_IMX53) += pinctrl-imx53.o
obj-$(CONFIG_PINCTRL_IMX6Q) += pinctrl-imx6q.o
obj-$(CONFIG_PINCTRL_IMX6Q) += pinctrl-imx6dl.o
obj-$(CONFIG_PINCTRL_IMX6SL) += pinctrl-imx6sl.o
+obj-$(CONFIG_PINCTRL_IMX6SLL) += pinctrl-imx6sll.o
obj-$(CONFIG_PINCTRL_IMX6SX) += pinctrl-imx6sx.o
obj-$(CONFIG_PINCTRL_IMX6UL) += pinctrl-imx6ul.o
obj-$(CONFIG_PINCTRL_IMX7D) += pinctrl-imx7d.o
diff --git a/drivers/pinctrl/freescale/pinctrl-imx6sll.c b/drivers/pinctrl/freescale/pinctrl-imx6sll.c
new file mode 100644
index 0000000..2f4baff
--- /dev/null
+++ b/drivers/pinctrl/freescale/pinctrl-imx6sll.c
@@ -0,0 +1,385 @@
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ * Author: Bai Ping <ping.bai@nxp.com>
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/pinctrl/pinctrl.h>
+
+#include "pinctrl-imx.h"
+
+enum imx6sll_pads {
+ MX6SLL_PAD_RESERVE0 = 0,
+ MX6SLL_PAD_RESERVE1 = 1,
+ MX6SLL_PAD_RESERVE2 = 2,
+ MX6SLL_PAD_RESERVE3 = 3,
+ MX6SLL_PAD_RESERVE4 = 4,
+ MX6SLL_PAD_WDOG_B = 5,
+ MX6SLL_PAD_REF_CLK_24M = 6,
+ MX6SLL_PAD_REF_CLK_32K = 7,
+ MX6SLL_PAD_PWM1 = 8,
+ MX6SLL_PAD_KEY_COL0 = 9,
+ MX6SLL_PAD_KEY_ROW0 = 10,
+ MX6SLL_PAD_KEY_COL1 = 11,
+ MX6SLL_PAD_KEY_ROW1 = 12,
+ MX6SLL_PAD_KEY_COL2 = 13,
+ MX6SLL_PAD_KEY_ROW2 = 14,
+ MX6SLL_PAD_KEY_COL3 = 15,
+ MX6SLL_PAD_KEY_ROW3 = 16,
+ MX6SLL_PAD_KEY_COL4 = 17,
+ MX6SLL_PAD_KEY_ROW4 = 18,
+ MX6SLL_PAD_KEY_COL5 = 19,
+ MX6SLL_PAD_KEY_ROW5 = 20,
+ MX6SLL_PAD_KEY_COL6 = 21,
+ MX6SLL_PAD_KEY_ROW6 = 22,
+ MX6SLL_PAD_KEY_COL7 = 23,
+ MX6SLL_PAD_KEY_ROW7 = 24,
+ MX6SLL_PAD_EPDC_DATA00 = 25,
+ MX6SLL_PAD_EPDC_DATA01 = 26,
+ MX6SLL_PAD_EPDC_DATA02 = 27,
+ MX6SLL_PAD_EPDC_DATA03 = 28,
+ MX6SLL_PAD_EPDC_DATA04 = 29,
+ MX6SLL_PAD_EPDC_DATA05 = 30,
+ MX6SLL_PAD_EPDC_DATA06 = 31,
+ MX6SLL_PAD_EPDC_DATA07 = 32,
+ MX6SLL_PAD_EPDC_DATA08 = 33,
+ MX6SLL_PAD_EPDC_DATA09 = 34,
+ MX6SLL_PAD_EPDC_DATA10 = 35,
+ MX6SLL_PAD_EPDC_DATA11 = 36,
+ MX6SLL_PAD_EPDC_DATA12 = 37,
+ MX6SLL_PAD_EPDC_DATA13 = 38,
+ MX6SLL_PAD_EPDC_DATA14 = 39,
+ MX6SLL_PAD_EPDC_DATA15 = 40,
+ MX6SLL_PAD_EPDC_SDCLK = 41,
+ MX6SLL_PAD_EPDC_SDLE = 42,
+ MX6SLL_PAD_EPDC_SDOE = 43,
+ MX6SLL_PAD_EPDC_SDSHR = 44,
+ MX6SLL_PAD_EPDC_SDCE0 = 45,
+ MX6SLL_PAD_EPDC_SDCE1 = 46,
+ MX6SLL_PAD_EPDC_SDCE2 = 47,
+ MX6SLL_PAD_EPDC_SDCE3 = 48,
+ MX6SLL_PAD_EPDC_GDCLK = 49,
+ MX6SLL_PAD_EPDC_GDOE = 50,
+ MX6SLL_PAD_EPDC_GDRL = 51,
+ MX6SLL_PAD_EPDC_GDSP = 52,
+ MX6SLL_PAD_EPDC_VCOM0 = 53,
+ MX6SLL_PAD_EPDC_VCOM1 = 54,
+ MX6SLL_PAD_EPDC_BDR0 = 55,
+ MX6SLL_PAD_EPDC_BDR1 = 56,
+ MX6SLL_PAD_EPDC_PWR_CTRL0 = 57,
+ MX6SLL_PAD_EPDC_PWR_CTRL1 = 58,
+ MX6SLL_PAD_EPDC_PWR_CTRL2 = 59,
+ MX6SLL_PAD_EPDC_PWR_CTRL3 = 60,
+ MX6SLL_PAD_EPDC_PWR_COM = 61,
+ MX6SLL_PAD_EPDC_PWR_INT = 62,
+ MX6SLL_PAD_EPDC_PWR_STAT = 63,
+ MX6SLL_PAD_EPDC_PWR_WAKE = 64,
+ MX6SLL_PAD_LCD_CLK = 65,
+ MX6SLL_PAD_LCD_ENABLE = 66,
+ MX6SLL_PAD_LCD_HSYNC = 67,
+ MX6SLL_PAD_LCD_VSYNC = 68,
+ MX6SLL_PAD_LCD_RESET = 69,
+ MX6SLL_PAD_LCD_DATA00 = 70,
+ MX6SLL_PAD_LCD_DATA01 = 71,
+ MX6SLL_PAD_LCD_DATA02 = 72,
+ MX6SLL_PAD_LCD_DATA03 = 73,
+ MX6SLL_PAD_LCD_DATA04 = 74,
+ MX6SLL_PAD_LCD_DATA05 = 75,
+ MX6SLL_PAD_LCD_DATA06 = 76,
+ MX6SLL_PAD_LCD_DATA07 = 77,
+ MX6SLL_PAD_LCD_DATA08 = 78,
+ MX6SLL_PAD_LCD_DATA09 = 79,
+ MX6SLL_PAD_LCD_DATA10 = 80,
+ MX6SLL_PAD_LCD_DATA11 = 81,
+ MX6SLL_PAD_LCD_DATA12 = 82,
+ MX6SLL_PAD_LCD_DATA13 = 83,
+ MX6SLL_PAD_LCD_DATA14 = 84,
+ MX6SLL_PAD_LCD_DATA15 = 85,
+ MX6SLL_PAD_LCD_DATA16 = 86,
+ MX6SLL_PAD_LCD_DATA17 = 87,
+ MX6SLL_PAD_LCD_DATA18 = 88,
+ MX6SLL_PAD_LCD_DATA19 = 89,
+ MX6SLL_PAD_LCD_DATA20 = 90,
+ MX6SLL_PAD_LCD_DATA21 = 91,
+ MX6SLL_PAD_LCD_DATA22 = 92,
+ MX6SLL_PAD_LCD_DATA23 = 93,
+ MX6SLL_PAD_AUD_RXFS = 94,
+ MX6SLL_PAD_AUD_RXC = 95,
+ MX6SLL_PAD_AUD_RXD = 96,
+ MX6SLL_PAD_AUD_TXC = 97,
+ MX6SLL_PAD_AUD_TXFS = 98,
+ MX6SLL_PAD_AUD_TXD = 99,
+ MX6SLL_PAD_AUD_MCLK = 100,
+ MX6SLL_PAD_UART1_RXD = 101,
+ MX6SLL_PAD_UART1_TXD = 102,
+ MX6SLL_PAD_I2C1_SCL = 103,
+ MX6SLL_PAD_I2C1_SDA = 104,
+ MX6SLL_PAD_I2C2_SCL = 105,
+ MX6SLL_PAD_I2C2_SDA = 106,
+ MX6SLL_PAD_ECSPI1_SCLK = 107,
+ MX6SLL_PAD_ECSPI1_MOSI = 108,
+ MX6SLL_PAD_ECSPI1_MISO = 109,
+ MX6SLL_PAD_ECSPI1_SS0 = 110,
+ MX6SLL_PAD_ECSPI2_SCLK = 111,
+ MX6SLL_PAD_ECSPI2_MOSI = 112,
+ MX6SLL_PAD_ECSPI2_MISO = 113,
+ MX6SLL_PAD_ECSPI2_SS0 = 114,
+ MX6SLL_PAD_SD1_CLK = 115,
+ MX6SLL_PAD_SD1_CMD = 116,
+ MX6SLL_PAD_SD1_DATA0 = 117,
+ MX6SLL_PAD_SD1_DATA1 = 118,
+ MX6SLL_PAD_SD1_DATA2 = 119,
+ MX6SLL_PAD_SD1_DATA3 = 120,
+ MX6SLL_PAD_SD1_DATA4 = 121,
+ MX6SLL_PAD_SD1_DATA5 = 122,
+ MX6SLL_PAD_SD1_DATA6 = 123,
+ MX6SLL_PAD_SD1_DATA7 = 124,
+ MX6SLL_PAD_SD2_RESET = 125,
+ MX6SLL_PAD_SD2_CLK = 126,
+ MX6SLL_PAD_SD2_CMD = 127,
+ MX6SLL_PAD_SD2_DATA0 = 128,
+ MX6SLL_PAD_SD2_DATA1 = 129,
+ MX6SLL_PAD_SD2_DATA2 = 130,
+ MX6SLL_PAD_SD2_DATA3 = 131,
+ MX6SLL_PAD_SD2_DATA4 = 132,
+ MX6SLL_PAD_SD2_DATA5 = 133,
+ MX6SLL_PAD_SD2_DATA6 = 134,
+ MX6SLL_PAD_SD2_DATA7 = 135,
+ MX6SLL_PAD_SD3_CLK = 136,
+ MX6SLL_PAD_SD3_CMD = 137,
+ MX6SLL_PAD_SD3_DATA0 = 138,
+ MX6SLL_PAD_SD3_DATA1 = 139,
+ MX6SLL_PAD_SD3_DATA2 = 140,
+ MX6SLL_PAD_SD3_DATA3 = 141,
+ MX6SLL_PAD_GPIO4_IO20 = 142,
+ MX6SLL_PAD_GPIO4_IO21 = 143,
+ MX6SLL_PAD_GPIO4_IO19 = 144,
+ MX6SLL_PAD_GPIO4_IO25 = 145,
+ MX6SLL_PAD_GPIO4_IO18 = 146,
+ MX6SLL_PAD_GPIO4_IO24 = 147,
+ MX6SLL_PAD_GPIO4_IO23 = 148,
+ MX6SLL_PAD_GPIO4_IO17 = 149,
+ MX6SLL_PAD_GPIO4_IO22 = 150,
+ MX6SLL_PAD_GPIO4_IO16 = 151,
+ MX6SLL_PAD_GPIO4_IO26 = 152,
+};
+
+enum imx6sll_lpsr_pads {
+ MX6SLL_PAD_SNVS_TAMPER = 0,
+ MX6SLL_PAD_SNVS_PMIC_ON_REQ = 1,
+ MX6SLL_PAD_SNVS_PMIC_STBY_REQ = 2,
+ MX6SLL_PAD_SNVS_BOOT_MODE0 = 3,
+ MX6SLL_PAD_SNVS_BOOT_MODE1 = 4,
+};
+
+/* Pad names for the pinmux subsystem */
+static const struct pinctrl_pin_desc imx6sll_pinctrl_pads[] = {
+ IMX_PINCTRL_PIN(MX6SLL_PAD_RESERVE0),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_RESERVE1),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_RESERVE2),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_RESERVE3),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_RESERVE4),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_WDOG_B),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_REF_CLK_24M),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_REF_CLK_32K),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_PWM1),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_KEY_COL0),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_KEY_ROW0),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_KEY_COL1),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_KEY_ROW1),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_KEY_COL2),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_KEY_ROW2),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_KEY_COL3),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_KEY_ROW3),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_KEY_COL4),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_KEY_ROW4),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_KEY_COL5),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_KEY_ROW5),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_KEY_COL6),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_KEY_ROW6),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_KEY_COL7),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_KEY_ROW7),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_DATA00),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_DATA01),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_DATA02),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_DATA03),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_DATA04),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_DATA05),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_DATA06),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_DATA07),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_DATA08),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_DATA09),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_DATA10),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_DATA11),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_DATA12),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_DATA13),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_DATA14),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_DATA15),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_SDCLK),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_SDLE),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_SDOE),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_SDSHR),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_SDCE0),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_SDCE1),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_SDCE2),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_SDCE3),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_GDCLK),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_GDOE),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_GDRL),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_GDSP),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_VCOM0),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_VCOM1),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_BDR0),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_BDR1),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_PWR_CTRL0),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_PWR_CTRL1),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_PWR_CTRL2),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_PWR_CTRL3),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_PWR_COM),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_PWR_INT),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_PWR_STAT),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_PWR_WAKE),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_CLK),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_ENABLE),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_HSYNC),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_VSYNC),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_RESET),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA00),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA01),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA02),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA03),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA04),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA05),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA06),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA07),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA08),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA09),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA10),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA11),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA12),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA13),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA14),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA15),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA16),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA17),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA18),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA19),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA20),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA21),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA22),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA23),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_AUD_RXFS),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_AUD_RXC),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_AUD_RXD),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_AUD_TXC),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_AUD_TXFS),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_AUD_TXD),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_AUD_MCLK),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_UART1_RXD),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_UART1_TXD),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_I2C1_SCL),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_I2C1_SDA),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_I2C2_SCL),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_I2C2_SDA),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_ECSPI1_SCLK),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_ECSPI1_MOSI),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_ECSPI1_MISO),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_ECSPI1_SS0),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_ECSPI2_SCLK),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_ECSPI2_MOSI),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_ECSPI2_MISO),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_ECSPI2_SS0),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_SD1_CLK),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_SD1_CMD),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_SD1_DATA0),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_SD1_DATA1),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_SD1_DATA2),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_SD1_DATA3),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_SD1_DATA4),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_SD1_DATA5),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_SD1_DATA6),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_SD1_DATA7),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_SD2_RESET),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_SD2_CLK),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_SD2_CMD),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_SD2_DATA0),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_SD2_DATA1),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_SD2_DATA2),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_SD2_DATA3),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_SD2_DATA4),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_SD2_DATA5),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_SD2_DATA6),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_SD2_DATA7),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_SD3_CLK),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_SD3_CMD),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_SD3_DATA0),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_SD3_DATA1),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_SD3_DATA2),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_SD3_DATA3),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_GPIO4_IO20),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_GPIO4_IO21),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_GPIO4_IO19),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_GPIO4_IO25),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_GPIO4_IO18),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_GPIO4_IO24),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_GPIO4_IO23),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_GPIO4_IO17),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_GPIO4_IO22),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_GPIO4_IO16),
+ IMX_PINCTRL_PIN(MX6SLL_PAD_GPIO4_IO26),
+};
+
+static struct imx_pinctrl_soc_info imx6sll_pinctrl_info = {
+ .pins = imx6sll_pinctrl_pads,
+ .npins = ARRAY_SIZE(imx6sll_pinctrl_pads),
+ .gpr_compatible = "fsl,imx6sll-iomuxc-gpr",
+};
+
+static const struct of_device_id imx6sll_pinctrl_of_match[] = {
+ { .compatible = "fsl,imx6sll-iomuxc", .data = &imx6sll_pinctrl_info, },
+ { /* sentinel */ }
+};
+
+static int imx6sll_pinctrl_probe(struct platform_device *pdev)
+{
+ const struct of_device_id *match;
+ struct imx_pinctrl_soc_info *pinctrl_info;
+
+ match = of_match_device(imx6sll_pinctrl_of_match, &pdev->dev);
+
+ if (!match)
+ return -ENODEV;
+
+ pinctrl_info = (struct imx_pinctrl_soc_info *) match->data;
+
+ return imx_pinctrl_probe(pdev, pinctrl_info);
+}
+
+static struct platform_driver imx6sll_pinctrl_driver = {
+ .driver = {
+ .name = "imx6sll-pinctrl",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(imx6sll_pinctrl_of_match),
+ },
+ .probe = imx6sll_pinctrl_probe,
+};
+
+static int __init imx6sll_pinctrl_init(void)
+{
+ return platform_driver_register(&imx6sll_pinctrl_driver);
+}
+arch_initcall(imx6sll_pinctrl_init);
+
+static void __exit imx6sll_pinctrl_exit(void)
+{
+ platform_driver_unregister(&imx6sll_pinctrl_driver);
+}
+module_exit(imx6sll_pinctrl_exit);
--
1.9.1
next prev parent reply other threads:[~2016-12-27 9:47 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-27 9:47 [PATCH v2 00/12] Add basic code support for imx6sll Bai Ping
2016-12-27 9:47 ` [PATCH v2 01/12] ARM: imx: Add basic msl " Bai Ping
2016-12-27 9:47 ` [PATCH v2 02/12] driver: clocksource: add gpt timer " Bai Ping
2017-01-09 10:30 ` Daniel Lezcano
2016-12-27 9:47 ` [PATCH v2 03/12] Document: dt: binding: imx: update clock doc " Bai Ping
2017-01-03 17:48 ` Rob Herring
2016-12-27 9:47 ` [PATCH v2 04/12] driver: clk: imx: Add clock driver " Bai Ping
[not found] ` <1482832070-22668-5-git-send-email-ping.bai-3arQi8VN3Tc@public.gmane.org>
2017-01-03 17:49 ` Rob Herring
2017-01-10 0:37 ` Stephen Boyd
[not found] ` <20170110003753.GM17126-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2017-01-10 3:18 ` Jacky Bai
2017-01-12 22:05 ` Stephen Boyd
2017-01-13 3:04 ` Jacky Bai
2017-01-21 1:00 ` Stephen Boyd
2017-01-22 2:14 ` Jacky Bai
2016-12-27 9:47 ` [PATCH v2 05/12] Document: dt: binding: imx: update pinctrl doc " Bai Ping
2016-12-27 12:59 ` Linus Walleij
2017-01-09 2:32 ` Jacky Bai
[not found] ` <AM3PR04MB5304992095753B761E66A9A87640-f56W/S9L6NRDGcFijYBXZgfhPeD8jYilXA4E9RH9d+qIuWR1G4zioA@public.gmane.org>
2017-01-11 14:33 ` Linus Walleij
2017-01-12 2:57 ` Jacky Bai
2017-01-13 15:22 ` Linus Walleij
2017-01-17 6:35 ` Jacky Bai
2017-01-18 12:24 ` Linus Walleij
2017-01-23 6:04 ` Shawn Guo
2017-01-23 7:17 ` Jacky Bai
2017-01-26 14:05 ` Linus Walleij
2017-02-16 7:51 ` Dong Aisheng
2017-02-24 9:02 ` Dong Aisheng
2017-03-14 13:54 ` Linus Walleij
2017-03-15 14:05 ` Dong Aisheng
2016-12-27 9:47 ` Bai Ping [this message]
2016-12-27 13:01 ` [PATCH v2 06/12] driver: pinctrl: imx: Add pinctrl driver support " Linus Walleij
2017-01-03 1:00 ` Jacky Bai
2016-12-27 9:47 ` [PATCH v2 07/12] ARM: dts: imx: Add basic dtsi " Bai Ping
2016-12-27 9:47 ` [PATCH v2 08/12] ARM: dts: imx: Add imx6sll EVK board dts support Bai Ping
2016-12-27 9:47 ` [PATCH v2 09/12] ARM: debug: Add low level debug support for imx6sll Bai Ping
2016-12-27 9:47 ` [PATCH v2 10/12] ARM: imx: Add suspend/resume " Bai Ping
2016-12-27 9:47 ` [PATCH v2 11/12] ARM: imx: correct i.mx6sll dram io low power mode Bai Ping
2016-12-27 9:47 ` [PATCH v2 12/12] ARM: configs: enable imx6sll support in defconfig Bai Ping
2017-01-23 6:10 ` [PATCH v2 00/12] Add basic code support for imx6sll Shawn Guo
2017-01-23 7:18 ` Jacky Bai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1482832070-22668-7-git-send-email-ping.bai@nxp.com \
--to=ping.bai@nxp.com \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=fabio.estevam@nxp.com \
--cc=jacky.baip@gmail.com \
--cc=kernel@pengutronix.de \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mturquette@baylibre.com \
--cc=p.zabel@pengutronix.de \
--cc=robh+dt@kernel.org \
--cc=sboyd@codeaurora.org \
--cc=shawnguo@kernel.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).