From: Yoshihiro Kaneko <ykaneko0929@gmail.com>
To: linux-gpio@vger.kernel.org
Cc: Linus Walleij <linus.walleij@linaro.org>,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
Geert Uytterhoeven <geert+renesas@glider.be>,
Simon Horman <horms@verge.net.au>,
Magnus Damm <magnus.damm@gmail.com>,
linux-renesas-soc@vger.kernel.org
Subject: [PATCH 07/14] pinctrl: sh-pfc: r8a7796: Fix NFDATA{0..13} and NF{ALE,CLE,WE_N,RE_N} pin function definitions
Date: Thu, 13 Jul 2017 01:55:40 +0900 [thread overview]
Message-ID: <1499878547-3452-8-git-send-email-ykaneko0929@gmail.com> (raw)
In-Reply-To: <1499878547-3452-1-git-send-email-ykaneko0929@gmail.com>
From: Takeshi Kihara <takeshi.kihara.df@renesas.com>
This patch fixes the implementation incorrect of IPSR register value
definitions for NFDATA{0..13} and NF{ALE,CLE,WE_N,RE_N} pins function.
This is a correction to the incorrect implementation of IPSR register
pin assignment for R8A7796 SoC specification of R-Car Gen3 Hardware
User's Manual Rev.0.51E or later.
Fixes: f9aece7344bd ("pinctrl: sh-pfc: Initial R8A7796 PFC support")
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
---
drivers/pinctrl/sh-pfc/pfc-r8a7796.c | 36 ++++++++++++++++++------------------
1 file changed, 18 insertions(+), 18 deletions(-)
diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a7796.c b/drivers/pinctrl/sh-pfc/pfc-r8a7796.c
index 9a9094f..80007b9 100644
--- a/drivers/pinctrl/sh-pfc/pfc-r8a7796.c
+++ b/drivers/pinctrl/sh-pfc/pfc-r8a7796.c
@@ -291,24 +291,24 @@
#define IP8_23_20 FM(SD1_DAT1) FM(SD2_DAT5) FM(MSIOF1_TXD_G) FM(NFDATA14_B) F_(0, 0) FM(TS_SPSYNC1_B)FM(STP_ISSYNC_1_B) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
#define IP8_27_24 FM(SD1_DAT2) FM(SD2_DAT6) FM(MSIOF1_SS1_G) FM(NFDATA15_B) F_(0, 0) FM(TS_SDAT1_B) FM(STP_ISD_1_B) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
#define IP8_31_28 FM(SD1_DAT3) FM(SD2_DAT7) FM(MSIOF1_SS2_G) FM(NFRB_N_B) F_(0, 0) FM(TS_SDEN1_B) FM(STP_ISEN_1_B) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP9_3_0 FM(SD2_CLK) F_(0, 0) F_(0, 0) FM(NFDATA8) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP9_7_4 FM(SD2_CMD) F_(0, 0) F_(0, 0) FM(NFDATA9) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP9_11_8 FM(SD2_DAT0) F_(0, 0) F_(0, 0) FM(NFDATA10) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP9_15_12 FM(SD2_DAT1) F_(0, 0) F_(0, 0) FM(NFDATA11) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP9_19_16 FM(SD2_DAT2) F_(0, 0) F_(0, 0) FM(NFDATA12) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP9_23_20 FM(SD2_DAT3) F_(0, 0) F_(0, 0) FM(NFDATA13) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP9_27_24 FM(SD2_DS) F_(0, 0) F_(0, 0) FM(NFALE) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) FM(SATA_DEVSLP_B) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP9_31_28 FM(SD3_CLK) F_(0, 0) F_(0, 0) FM(NFWE_N) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP10_3_0 FM(SD3_CMD) F_(0, 0) F_(0, 0) FM(NFRE_N) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP10_7_4 FM(SD3_DAT0) F_(0, 0) F_(0, 0) FM(NFDATA0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP10_11_8 FM(SD3_DAT1) F_(0, 0) F_(0, 0) FM(NFDATA1) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP10_15_12 FM(SD3_DAT2) F_(0, 0) F_(0, 0) FM(NFDATA2) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP10_19_16 FM(SD3_DAT3) F_(0, 0) F_(0, 0) FM(NFDATA3) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP10_23_20 FM(SD3_DAT4) FM(SD2_CD_A) F_(0, 0) FM(NFDATA4) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP10_27_24 FM(SD3_DAT5) FM(SD2_WP_A) F_(0, 0) FM(NFDATA5) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP10_31_28 FM(SD3_DAT6) FM(SD3_CD) F_(0, 0) FM(NFDATA6) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP11_3_0 FM(SD3_DAT7) FM(SD3_WP) F_(0, 0) FM(NFDATA7) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP11_7_4 FM(SD3_DS) F_(0, 0) F_(0, 0) FM(NFCLE) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP9_3_0 FM(SD2_CLK) F_(0, 0) FM(NFDATA8) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP9_7_4 FM(SD2_CMD) F_(0, 0) FM(NFDATA9) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP9_11_8 FM(SD2_DAT0) F_(0, 0) FM(NFDATA10) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP9_15_12 FM(SD2_DAT1) F_(0, 0) FM(NFDATA11) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP9_19_16 FM(SD2_DAT2) F_(0, 0) FM(NFDATA12) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP9_23_20 FM(SD2_DAT3) F_(0, 0) FM(NFDATA13) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP9_27_24 FM(SD2_DS) F_(0, 0) FM(NFALE) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) FM(SATA_DEVSLP_B) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP9_31_28 FM(SD3_CLK) F_(0, 0) FM(NFWE_N) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP10_3_0 FM(SD3_CMD) F_(0, 0) FM(NFRE_N) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP10_7_4 FM(SD3_DAT0) F_(0, 0) FM(NFDATA0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP10_11_8 FM(SD3_DAT1) F_(0, 0) FM(NFDATA1) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP10_15_12 FM(SD3_DAT2) F_(0, 0) FM(NFDATA2) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP10_19_16 FM(SD3_DAT3) F_(0, 0) FM(NFDATA3) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP10_23_20 FM(SD3_DAT4) FM(SD2_CD_A) FM(NFDATA4) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP10_27_24 FM(SD3_DAT5) FM(SD2_WP_A) FM(NFDATA5) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP10_31_28 FM(SD3_DAT6) FM(SD3_CD) FM(NFDATA6) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP11_3_0 FM(SD3_DAT7) FM(SD3_WP) FM(NFDATA7) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP11_7_4 FM(SD3_DS) F_(0, 0) FM(NFCLE) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
#define IP11_11_8 FM(SD0_CD) F_(0, 0) FM(NFDATA14_A) F_(0, 0) FM(SCL2_B) FM(SIM0_RST_A) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
/* IPSRx */ /* 0 */ /* 1 */ /* 2 */ /* 3 */ /* 4 */ /* 5 */ /* 6 */ /* 7 */ /* 8 */ /* 9 */ /* A */ /* B */ /* C - F */
--
1.9.1
next prev parent reply other threads:[~2017-07-12 16:55 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-12 16:55 [PATCH 00/14] pinctrl: sh-pfc: r8a7796: Fix pin assignment definitions Yoshihiro Kaneko
2017-07-12 16:55 ` [PATCH 01/14] pinctrl: sh-pfc: r8a7796: Fix MOD_SEL1 bit[25:24] to 0x3 when using STP_ISEN_1_D Yoshihiro Kaneko
2017-07-13 8:07 ` Geert Uytterhoeven
2017-07-12 16:55 ` [PATCH 02/14] pinctrl: sh-pfc: r8a7796: Fix IPSR register setting when MSIOF3_SS1_E pin was selected Yoshihiro Kaneko
2017-07-13 8:29 ` Geert Uytterhoeven
2017-07-12 16:55 ` [PATCH 03/14] pinctrl: sh-pfc: r8a7796: Fix MOD_SEL2 bit26 to 0x0 when using SCK5_A Yoshihiro Kaneko
2017-07-13 8:40 ` Geert Uytterhoeven
2017-07-12 16:55 ` [PATCH 04/14] pinctrl: sh-pfc: r8a7796: Fix MOD_SEL register pin assignment for SSI pins group Yoshihiro Kaneko
2017-07-13 9:12 ` Geert Uytterhoeven
2017-07-23 16:32 ` Yoshihiro Kaneko
2017-08-17 13:16 ` Geert Uytterhoeven
2017-07-12 16:55 ` [PATCH 05/14] pinctrl: sh-pfc: r8a7796: Fix SCIF_CLK_{A,B} pin's MOD_SEL assignment to MOD_SEL1 bit10 Yoshihiro Kaneko
2017-07-13 9:24 ` Geert Uytterhoeven
2017-07-12 16:55 ` [PATCH 06/14] pinctrl: sh-pfc: r8a7796: Fix FMCLK{_C,_D} and FMIN{_C,_D} pin function definitions Yoshihiro Kaneko
2017-07-13 9:30 ` Geert Uytterhoeven
2017-07-12 16:55 ` Yoshihiro Kaneko [this message]
2017-07-13 9:36 ` [PATCH 07/14] pinctrl: sh-pfc: r8a7796: Fix NFDATA{0..13} and NF{ALE,CLE,WE_N,RE_N} " Geert Uytterhoeven
2017-07-12 16:55 ` [PATCH 08/14] pinctrl: sh-pfc: r8a7796: Fix MSIOF3_{SS1,SS2}_E pins " Yoshihiro Kaneko
2017-07-13 9:39 ` Geert Uytterhoeven
2017-07-12 16:55 ` [PATCH 09/14] pinctrl: sh-pfc: r8a7796: Fix MOD_SEL register pin assignment for TCLK{1,2}_{A,B} pins group Yoshihiro Kaneko
2017-07-13 9:42 ` Geert Uytterhoeven
2017-07-12 16:55 ` [PATCH 10/14] pinctrl: sh-pfc: r8a7796: Fix to delete FSCLKST pin and IPSR7 bit[15:12] register definitions Yoshihiro Kaneko
2017-07-13 9:45 ` Geert Uytterhoeven
2017-07-12 16:55 ` [PATCH 11/14] pinctrl: sh-pfc: r8a7796: Fix to delete SATA_DEVSLP_B pins function definitions Yoshihiro Kaneko
2017-07-13 9:46 ` Geert Uytterhoeven
2017-07-12 16:55 ` [PATCH 12/14] pinctrl: sh-pfc: r8a7796: Fix to delete MOD_SEL0 bit2 register definitions Yoshihiro Kaneko
2017-07-13 9:48 ` Geert Uytterhoeven
2017-07-12 16:55 ` [PATCH 13/14] pinctrl: sh-pfc: r8a7796: Fix IPSR and MOD_SEL register pin assignment for FSO pins group Yoshihiro Kaneko
2017-07-13 9:57 ` Geert Uytterhoeven
2017-07-12 16:55 ` [PATCH 14/14] pinctrl: sh-pfc: r8a7796: Rename CS1# pin function definitions Yoshihiro Kaneko
2017-07-13 10:02 ` Geert Uytterhoeven
2017-08-01 13:22 ` [PATCH 00/14] pinctrl: sh-pfc: r8a7796: Fix pin assignment definitions Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1499878547-3452-8-git-send-email-ykaneko0929@gmail.com \
--to=ykaneko0929@gmail.com \
--cc=geert+renesas@glider.be \
--cc=horms@verge.net.au \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).