From: Dong Aisheng <aisheng.dong@nxp.com>
To: linux-gpio@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org, linus.walleij@linaro.org,
shawnguo@kernel.org, aisheng.dong@nxp.com, dongas86@gmail.com,
stefan@agner.ch, ping.bai@nxp.com, fugang.duan@nxp.com,
kernel@pengutronix.de, Alexandre Courbot <gnurou@gmail.com>
Subject: [PATCH V4 RESEND 5/6] pinctrl: imx: make imx_pmx_ops.gpio_set_direction platform specific callbacks
Date: Tue, 25 Jul 2017 21:41:55 +0800 [thread overview]
Message-ID: <1500990116-3620-6-git-send-email-aisheng.dong@nxp.com> (raw)
In-Reply-To: <1500990116-3620-1-git-send-email-aisheng.dong@nxp.com>
Various IMX platforms may have different imx_pmx_ops.gpio_set_direction
implementations, so let's make it platform specific callbacks instead of
the fixed common one.
Currently only VF610 platform implements it. No function level changes.
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Acked-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
---
ChangeLog:
* new patch.
---
drivers/pinctrl/freescale/pinctrl-imx.c | 48 +++----------------------------
drivers/pinctrl/freescale/pinctrl-imx.h | 20 +++++++++++++
drivers/pinctrl/freescale/pinctrl-vf610.c | 25 ++++++++++++++++
3 files changed, 49 insertions(+), 44 deletions(-)
diff --git a/drivers/pinctrl/freescale/pinctrl-imx.c b/drivers/pinctrl/freescale/pinctrl-imx.c
index 505fe79..ad23e39 100644
--- a/drivers/pinctrl/freescale/pinctrl-imx.c
+++ b/drivers/pinctrl/freescale/pinctrl-imx.c
@@ -35,18 +35,6 @@
#define IMX_NO_PAD_CTL 0x80000000 /* no pin config need */
#define IMX_PAD_SION 0x40000000 /* set SION */
-/**
- * @dev: a pointer back to containing device
- * @base: the offset to the controller in virtual memory
- */
-struct imx_pinctrl {
- struct device *dev;
- struct pinctrl_dev *pctl;
- void __iomem *base;
- void __iomem *input_sel_base;
- struct imx_pinctrl_soc_info *info;
-};
-
static inline const struct group_desc *imx_pinctrl_find_group_by_name(
struct pinctrl_dev *pctldev,
const char *name)
@@ -255,42 +243,11 @@ static int imx_pmx_set(struct pinctrl_dev *pctldev, unsigned selector,
return 0;
}
-static int imx_pmx_gpio_set_direction(struct pinctrl_dev *pctldev,
- struct pinctrl_gpio_range *range, unsigned offset, bool input)
-{
- struct imx_pinctrl *ipctl = pinctrl_dev_get_drvdata(pctldev);
- struct imx_pinctrl_soc_info *info = ipctl->info;
- const struct imx_pin_reg *pin_reg;
- u32 reg;
-
- /*
- * Only Vybrid has the input/output buffer enable flags (IBE/OBE)
- * They are part of the shared mux/conf register.
- */
- if (!(info->flags & SHARE_MUX_CONF_REG))
- return 0;
-
- pin_reg = &info->pin_regs[offset];
- if (pin_reg->mux_reg == -1)
- return -EINVAL;
-
- /* IBE always enabled allows us to read the value "on the wire" */
- reg = readl(ipctl->base + pin_reg->mux_reg);
- if (input)
- reg &= ~0x2;
- else
- reg |= 0x2;
- writel(reg, ipctl->base + pin_reg->mux_reg);
-
- return 0;
-}
-
-static const struct pinmux_ops imx_pmx_ops = {
+struct pinmux_ops imx_pmx_ops = {
.get_functions_count = pinmux_generic_get_function_count,
.get_function_name = pinmux_generic_get_function_name,
.get_function_groups = pinmux_generic_get_function_groups,
.set_mux = imx_pmx_set,
- .gpio_set_direction = imx_pmx_gpio_set_direction,
};
/* decode generic config into raw register values */
@@ -793,6 +750,9 @@ int imx_pinctrl_probe(struct platform_device *pdev,
imx_pinctrl_desc->custom_params = info->custom_params;
imx_pinctrl_desc->num_custom_params = info->num_custom_params;
+ /* platform specific callback */
+ imx_pmx_ops.gpio_set_direction = info->gpio_set_direction;
+
mutex_init(&info->mutex);
ipctl->info = info;
diff --git a/drivers/pinctrl/freescale/pinctrl-imx.h b/drivers/pinctrl/freescale/pinctrl-imx.h
index 880bba7..5aa22b5 100644
--- a/drivers/pinctrl/freescale/pinctrl-imx.h
+++ b/drivers/pinctrl/freescale/pinctrl-imx.h
@@ -16,9 +16,12 @@
#define __DRIVERS_PINCTRL_IMX_H
#include <linux/pinctrl/pinconf-generic.h>
+#include <linux/pinctrl/pinmux.h>
struct platform_device;
+extern struct pinmux_ops imx_pmx_ops;
+
/**
* struct imx_pin - describes a single i.MX pin
* @pin: the pin_id of this pin
@@ -76,6 +79,23 @@ struct imx_pinctrl_soc_info {
unsigned int num_decodes;
void (*fixup)(unsigned long *configs, unsigned int num_configs,
u32 *raw_config);
+
+ int (*gpio_set_direction)(struct pinctrl_dev *pctldev,
+ struct pinctrl_gpio_range *range,
+ unsigned offset,
+ bool input);
+};
+
+/**
+ * @dev: a pointer back to containing device
+ * @base: the offset to the controller in virtual memory
+ */
+struct imx_pinctrl {
+ struct device *dev;
+ struct pinctrl_dev *pctl;
+ void __iomem *base;
+ void __iomem *input_sel_base;
+ struct imx_pinctrl_soc_info *info;
};
#define IMX_CFG_PARAMS_DECODE(p, m, o) \
diff --git a/drivers/pinctrl/freescale/pinctrl-vf610.c b/drivers/pinctrl/freescale/pinctrl-vf610.c
index 3bd8556..ac18bb6 100644
--- a/drivers/pinctrl/freescale/pinctrl-vf610.c
+++ b/drivers/pinctrl/freescale/pinctrl-vf610.c
@@ -295,10 +295,35 @@ static const struct pinctrl_pin_desc vf610_pinctrl_pads[] = {
IMX_PINCTRL_PIN(VF610_PAD_PTA7),
};
+static int vf610_pmx_gpio_set_direction(struct pinctrl_dev *pctldev,
+ struct pinctrl_gpio_range *range,
+ unsigned offset, bool input)
+{
+ struct imx_pinctrl *ipctl = pinctrl_dev_get_drvdata(pctldev);
+ struct imx_pinctrl_soc_info *info = ipctl->info;
+ const struct imx_pin_reg *pin_reg;
+ u32 reg;
+
+ pin_reg = &info->pin_regs[offset];
+ if (pin_reg->mux_reg == -1)
+ return -EINVAL;
+
+ /* IBE always enabled allows us to read the value "on the wire" */
+ reg = readl(ipctl->base + pin_reg->mux_reg);
+ if (input)
+ reg &= ~0x2;
+ else
+ reg |= 0x2;
+ writel(reg, ipctl->base + pin_reg->mux_reg);
+
+ return 0;
+}
+
static struct imx_pinctrl_soc_info vf610_pinctrl_info = {
.pins = vf610_pinctrl_pads,
.npins = ARRAY_SIZE(vf610_pinctrl_pads),
.flags = SHARE_MUX_CONF_REG | ZERO_OFFSET_VALID,
+ .gpio_set_direction = vf610_pmx_gpio_set_direction,
.mux_mask = 0x700000,
.mux_shift = 20,
};
--
2.7.4
next prev parent reply other threads:[~2017-07-25 13:42 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-25 13:41 [PATCH V4 RESEND 0/6] pinctrl: imx: add imx7ulp pinctrl support Dong Aisheng
[not found] ` <1500990116-3620-1-git-send-email-aisheng.dong-3arQi8VN3Tc@public.gmane.org>
2017-07-25 13:41 ` [PATCH V4 RESEND 1/6] dt-bindings: pinctrl: add imx7ulp pinctrl binding doc Dong Aisheng
[not found] ` <1500990116-3620-2-git-send-email-aisheng.dong-3arQi8VN3Tc@public.gmane.org>
2017-08-01 11:50 ` Linus Walleij
2017-07-25 13:41 ` [PATCH V4 RESEND 2/6] pinctrl: imx: switch to use the generic pinmux property Dong Aisheng
2017-08-01 11:52 ` Linus Walleij
2017-07-25 13:41 ` [PATCH V4 RESEND 3/6] pinctrl: imx: add imx7ulp driver Dong Aisheng
2017-08-01 11:53 ` Linus Walleij
2017-07-25 13:41 ` [PATCH V4 RESEND 4/6] pinctrl: imx: remove gpio_request_enable and gpio_disable_free Dong Aisheng
2017-08-01 11:54 ` Linus Walleij
2017-07-25 13:41 ` Dong Aisheng [this message]
2017-08-01 11:55 ` [PATCH V4 RESEND 5/6] pinctrl: imx: make imx_pmx_ops.gpio_set_direction platform specific callbacks Linus Walleij
2017-07-25 13:41 ` [PATCH V4 RESEND 6/6] pinctrl: pinctrl-imx7ulp: add gpio_set_direction support Dong Aisheng
2017-08-01 11:56 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1500990116-3620-6-git-send-email-aisheng.dong@nxp.com \
--to=aisheng.dong@nxp.com \
--cc=dongas86@gmail.com \
--cc=fugang.duan@nxp.com \
--cc=gnurou@gmail.com \
--cc=kernel@pengutronix.de \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=ping.bai@nxp.com \
--cc=shawnguo@kernel.org \
--cc=stefan@agner.ch \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).