From: Yoshihiro Kaneko <ykaneko0929@gmail.com>
To: linux-gpio@vger.kernel.org
Cc: Linus Walleij <linus.walleij@linaro.org>,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
Geert Uytterhoeven <geert+renesas@glider.be>,
Simon Horman <horms@verge.net.au>,
Magnus Damm <magnus.damm@gmail.com>,
linux-renesas-soc@vger.kernel.org
Subject: [PATCH 9/9] pinctrl: sh-pfc: r8a7795: Fix to reserved MOD_SEL2 bit22
Date: Fri, 28 Jul 2017 20:41:21 +0900 [thread overview]
Message-ID: <1501242081-3805-10-git-send-email-ykaneko0929@gmail.com> (raw)
In-Reply-To: <1501242081-3805-1-git-send-email-ykaneko0929@gmail.com>
From: Takeshi Kihara <takeshi.kihara.df@renesas.com>
This is a correction because MOD_SEL register specification for R8A7795
ES2.0 SoC was changed in R-Car Gen3 Hardware User's Manual Rev.0.54E.
Fixes: 12f5d9a1dc7f ("pinctrl: sh-pfc: r8a7795: Replace for Renesas R8A7795 ES2.0 SoC")
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
---
drivers/pinctrl/sh-pfc/pfc-r8a7795.c | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a7795.c b/drivers/pinctrl/sh-pfc/pfc-r8a7795.c
index 44beb7c..bbed0d6 100644
--- a/drivers/pinctrl/sh-pfc/pfc-r8a7795.c
+++ b/drivers/pinctrl/sh-pfc/pfc-r8a7795.c
@@ -496,7 +496,6 @@
#define MOD_SEL2_28_27 FM(SEL_FM_0) FM(SEL_FM_1) FM(SEL_FM_2) FM(SEL_FM_3)
#define MOD_SEL2_26 FM(SEL_SCIF5_0) FM(SEL_SCIF5_1)
#define MOD_SEL2_25_24_23 FM(SEL_I2C6_0) FM(SEL_I2C6_1) FM(SEL_I2C6_2) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define MOD_SEL2_22 FM(SEL_NDF_0) FM(SEL_NDF_1)
#define MOD_SEL2_21 FM(SEL_SSI2_0) FM(SEL_SSI2_1)
#define MOD_SEL2_20 FM(SEL_SSI9_0) FM(SEL_SSI9_1)
#define MOD_SEL2_19 FM(SEL_TIMER_TMU2_0) FM(SEL_TIMER_TMU2_1)
@@ -513,7 +512,7 @@
MOD_SEL0_26_25_24 MOD_SEL1_26 MOD_SEL2_26 \
MOD_SEL1_25_24 MOD_SEL2_25_24_23 \
MOD_SEL0_23 MOD_SEL1_23_22_21 \
-MOD_SEL0_22 MOD_SEL2_22 \
+MOD_SEL0_22 \
MOD_SEL0_21 MOD_SEL2_21 \
MOD_SEL0_20 MOD_SEL1_20 MOD_SEL2_20 \
MOD_SEL0_19 MOD_SEL1_19 MOD_SEL2_19 \
@@ -1020,35 +1019,35 @@ enum {
PINMUX_IPSR_GPSR(IP8_15_12, SD1_CMD),
PINMUX_IPSR_MSEL(IP8_15_12, MSIOF1_SYNC_G, SEL_MSIOF1_6),
- PINMUX_IPSR_MSEL(IP8_15_12, NFCE_N_B, SEL_NDF_1),
+ PINMUX_IPSR_GPSR(IP8_15_12, NFCE_N_B),
PINMUX_IPSR_MSEL(IP8_15_12, SIM0_D_A, SEL_SIMCARD_0),
PINMUX_IPSR_MSEL(IP8_15_12, STP_IVCXO27_1_B, SEL_SSP1_1_1),
PINMUX_IPSR_GPSR(IP8_19_16, SD1_DAT0),
PINMUX_IPSR_GPSR(IP8_19_16, SD2_DAT4),
PINMUX_IPSR_MSEL(IP8_19_16, MSIOF1_RXD_G, SEL_MSIOF1_6),
- PINMUX_IPSR_MSEL(IP8_19_16, NFWP_N_B, SEL_NDF_1),
+ PINMUX_IPSR_GPSR(IP8_19_16, NFWP_N_B),
PINMUX_IPSR_MSEL(IP8_19_16, TS_SCK1_B, SEL_TSIF1_1),
PINMUX_IPSR_MSEL(IP8_19_16, STP_ISCLK_1_B, SEL_SSP1_1_1),
PINMUX_IPSR_GPSR(IP8_23_20, SD1_DAT1),
PINMUX_IPSR_GPSR(IP8_23_20, SD2_DAT5),
PINMUX_IPSR_MSEL(IP8_23_20, MSIOF1_TXD_G, SEL_MSIOF1_6),
- PINMUX_IPSR_MSEL(IP8_23_20, NFDATA14_B, SEL_NDF_1),
+ PINMUX_IPSR_GPSR(IP8_23_20, NFDATA14_B),
PINMUX_IPSR_MSEL(IP8_23_20, TS_SPSYNC1_B, SEL_TSIF1_1),
PINMUX_IPSR_MSEL(IP8_23_20, STP_ISSYNC_1_B, SEL_SSP1_1_1),
PINMUX_IPSR_GPSR(IP8_27_24, SD1_DAT2),
PINMUX_IPSR_GPSR(IP8_27_24, SD2_DAT6),
PINMUX_IPSR_MSEL(IP8_27_24, MSIOF1_SS1_G, SEL_MSIOF1_6),
- PINMUX_IPSR_MSEL(IP8_27_24, NFDATA15_B, SEL_NDF_1),
+ PINMUX_IPSR_GPSR(IP8_27_24, NFDATA15_B),
PINMUX_IPSR_MSEL(IP8_27_24, TS_SDAT1_B, SEL_TSIF1_1),
PINMUX_IPSR_MSEL(IP8_27_24, STP_ISD_1_B, SEL_SSP1_1_1),
PINMUX_IPSR_GPSR(IP8_31_28, SD1_DAT3),
PINMUX_IPSR_GPSR(IP8_31_28, SD2_DAT7),
PINMUX_IPSR_MSEL(IP8_31_28, MSIOF1_SS2_G, SEL_MSIOF1_6),
- PINMUX_IPSR_MSEL(IP8_31_28, NFRB_N_B, SEL_NDF_1),
+ PINMUX_IPSR_GPSR(IP8_31_28, NFRB_N_B),
PINMUX_IPSR_MSEL(IP8_31_28, TS_SDEN1_B, SEL_TSIF1_1),
PINMUX_IPSR_MSEL(IP8_31_28, STP_ISEN_1_B, SEL_SSP1_1_1),
@@ -1268,7 +1267,7 @@ enum {
/* IPSR14 */
PINMUX_IPSR_GPSR(IP14_3_0, MSIOF0_SS1),
PINMUX_IPSR_MSEL(IP14_3_0, RX5_A, SEL_SCIF5_0),
- PINMUX_IPSR_MSEL(IP14_3_0, NFWP_N_A, SEL_NDF_0),
+ PINMUX_IPSR_GPSR(IP14_3_0, NFWP_N_A),
PINMUX_IPSR_MSEL(IP14_3_0, AUDIO_CLKA_C, SEL_ADG_A_2),
PINMUX_IPSR_MSEL(IP14_3_0, SSI_SCK2_A, SEL_SSI_0),
PINMUX_IPSR_MSEL(IP14_3_0, STP_IVCXO27_0_C, SEL_SSP1_0_2),
@@ -2779,7 +2778,8 @@ enum {
MOD_SEL2_28_27
MOD_SEL2_26
MOD_SEL2_25_24_23
- MOD_SEL2_22
+ /* RESERVED 22 */
+ 0, 0,
MOD_SEL2_21
MOD_SEL2_20
MOD_SEL2_19
--
1.9.1
next prev parent reply other threads:[~2017-07-28 11:41 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-28 11:41 [PATCH 0/9] pinctrl: sh-pfc: r8a7795: Fix pin assignment definitions Yoshihiro Kaneko
2017-07-28 11:41 ` [PATCH 1/9] pinctrl: sh-pfc: r8a7795: Fix MOD_SEL1 bit[25:24] to 0x3 when using STP_ISEN_1_D Yoshihiro Kaneko
2017-08-16 11:55 ` Geert Uytterhoeven
2017-07-28 11:41 ` [PATCH 2/9] pinctrl: sh-pfc: r8a7795: Fix MOD_SEL2 bit26 to 0x0 when using SCK5_A Yoshihiro Kaneko
2017-08-16 11:59 ` Geert Uytterhoeven
2017-07-28 11:41 ` [PATCH 3/9] pinctrl: sh-pfc: r8a7795: Fix SCIF_CLK_{A,B} pin's MOD_SEL assignment to MOD_SEL1 bit10 Yoshihiro Kaneko
2017-08-16 12:01 ` Geert Uytterhoeven
2017-07-28 11:41 ` [PATCH 4/9] pinctrl: sh-pfc: r8a7795: Fix FMCLK{_C,_D} and FMIN{_C,_D} pin function definitions Yoshihiro Kaneko
2017-08-16 12:04 ` Geert Uytterhoeven
2017-07-28 11:41 ` [PATCH 5/9] pinctrl: sh-pfc: r8a7795: Fix NFDATA{0..13} and NF{ALE,CLE,WE_N,RE_N} " Yoshihiro Kaneko
2017-08-16 12:06 ` Geert Uytterhoeven
2017-07-28 11:41 ` [PATCH 6/9] pinctrl: sh-pfc: r8a7795: Fix MOD_SEL register pin assignment for TCLK{1,2}_{A,B} pins group Yoshihiro Kaneko
2017-08-16 12:13 ` Geert Uytterhoeven
2017-07-28 11:41 ` [PATCH 7/9] pinctrl: sh-pfc: r8a7795: Fix to delete FSCLKST pin and IPSR7 bit[15:12] register definitions Yoshihiro Kaneko
2017-08-16 12:19 ` Geert Uytterhoeven
2017-07-28 11:41 ` [PATCH 8/9] pinctrl: sh-pfc: r8a7795: Rename CS1# pin function definitions Yoshihiro Kaneko
2017-08-16 12:20 ` Geert Uytterhoeven
2017-07-28 11:41 ` Yoshihiro Kaneko [this message]
2017-08-16 12:23 ` [PATCH 9/9] pinctrl: sh-pfc: r8a7795: Fix to reserved MOD_SEL2 bit22 Geert Uytterhoeven
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1501242081-3805-10-git-send-email-ykaneko0929@gmail.com \
--to=ykaneko0929@gmail.com \
--cc=geert+renesas@glider.be \
--cc=horms@verge.net.au \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).