From mboxrd@z Thu Jan 1 00:00:00 1970 From: Yoshihiro Kaneko Subject: [PATCH 1/9] pinctrl: sh-pfc: r8a7795: Fix MOD_SEL1 bit[25:24] to 0x3 when using STP_ISEN_1_D Date: Fri, 28 Jul 2017 20:41:13 +0900 Message-ID: <1501242081-3805-2-git-send-email-ykaneko0929@gmail.com> References: <1501242081-3805-1-git-send-email-ykaneko0929@gmail.com> Return-path: In-Reply-To: <1501242081-3805-1-git-send-email-ykaneko0929@gmail.com> Sender: linux-renesas-soc-owner@vger.kernel.org To: linux-gpio@vger.kernel.org Cc: Linus Walleij , Laurent Pinchart , Geert Uytterhoeven , Simon Horman , Magnus Damm , linux-renesas-soc@vger.kernel.org List-Id: linux-gpio@vger.kernel.org From: Takeshi Kihara This patch fixes the implementation incorrect of MOD_SEL1 bit[25:24] value when STP_ISEN_1_D pin function is selected for IPSR17 bit[27:24]. This is a correction to the incorrect implementation of MOD_SEL register pin assignment for R8A7795 SoC specification of R-Car Gen3 Hardware User's Manual Rev.0.51E or later. Fixes: 0b0ffc96dbe3 ("pinctrl: sh-pfc: Initial R8A7795 PFC support) Signed-off-by: Takeshi Kihara Signed-off-by: Yoshihiro Kaneko --- drivers/pinctrl/sh-pfc/pfc-r8a7795.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a7795.c b/drivers/pinctrl/sh-pfc/pfc-r8a7795.c index 1656295..73507bf 100644 --- a/drivers/pinctrl/sh-pfc/pfc-r8a7795.c +++ b/drivers/pinctrl/sh-pfc/pfc-r8a7795.c @@ -1460,7 +1460,7 @@ enum { PINMUX_IPSR_GPSR(IP17_27_24, AUDIO_CLKOUT_B), PINMUX_IPSR_MSEL(IP17_27_24, SSI_SCK2_B, SEL_SSI_1), PINMUX_IPSR_MSEL(IP17_27_24, TS_SDEN1_D, SEL_TSIF1_3), - PINMUX_IPSR_MSEL(IP17_27_24, STP_ISEN_1_D, SEL_SSP1_1_2), + PINMUX_IPSR_MSEL(IP17_27_24, STP_ISEN_1_D, SEL_SSP1_1_3), PINMUX_IPSR_MSEL(IP17_27_24, STP_OPWM_0_E, SEL_SSP1_0_4), PINMUX_IPSR_MSEL(IP17_27_24, RIF3_D0_B, SEL_DRIF3_1), PINMUX_IPSR_MSEL(IP17_27_24, TCLK2_B, SEL_TIMER_TMU_1), -- 1.9.1