[PATCH v2 resend 4/4] sh: sh7269: Remove nonexistent GPIO_PH[0-7] to fix pinctrl registration

[Geert Uytterhoeven <geert+renesas@glider.be>]

Pinmux_pins[] is initialized through PINMUX_GPIO(), using designated
array initializers, where the GPIO_* enums serve as indices.
If enum values are defined, but never used, pinmux_pins[] contains
(zero-filled) holes.  Such entries are treated as pin zero, which was
registered before, thus leading to pinctrl registration failures, as
seen on sh7722:

    sh-pfc pfc-sh7722: pin 0 already registered
    sh-pfc pfc-sh7722: error during pin registration
    sh-pfc pfc-sh7722: could not register: -22
    sh-pfc: probe of pfc-sh7722 failed with error -22

Remove GPIO_PH[0-7] from the enum to fix this.

Fixes: ef0fa5331a73e479 ("sh: Add pinmux for sh7269")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
Untested due to lack of hardware.

v2:
  - Replace fake error messages by reference to sh7722,
  - Add Reviewed-by.
---
 arch/sh/include/cpu-sh2a/cpu/sh7269.h | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/arch/sh/include/cpu-sh2a/cpu/sh7269.h b/arch/sh/include/cpu-sh2a/cpu/sh7269.h
index 2a0ca8780f0d8c34..13c495a9fc0007b4 100644
--- a/arch/sh/include/cpu-sh2a/cpu/sh7269.h
+++ b/arch/sh/include/cpu-sh2a/cpu/sh7269.h
@@ -45,9 +45,7 @@ enum {
 	GPIO_PG7, GPIO_PG6, GPIO_PG5, GPIO_PG4,
 	GPIO_PG3, GPIO_PG2, GPIO_PG1, GPIO_PG0,
 
-	/* Port H */
-	GPIO_PH7, GPIO_PH6, GPIO_PH5, GPIO_PH4,
-	GPIO_PH3, GPIO_PH2, GPIO_PH1, GPIO_PH0,
+	/* Port H - Port H does not have a Data Register */
 
 	/* Port I - not on device */
 
-- 
2.7.4