From: Yoshihiro Kaneko <ykaneko0929@gmail.com>
To: linux-gpio@vger.kernel.org
Cc: Linus Walleij <linus.walleij@linaro.org>,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
Geert Uytterhoeven <geert+renesas@glider.be>,
Simon Horman <horms@verge.net.au>,
Magnus Damm <magnus.damm@gmail.com>,
linux-renesas-soc@vger.kernel.org
Subject: [PATCH] pinctrl: sh-pfc: r8a7795: Fix to delete A20..A25 pins function definitions
Date: Thu, 16 Nov 2017 12:16:48 +0900 [thread overview]
Message-ID: <1510802208-30703-1-git-send-email-ykaneko0929@gmail.com> (raw)
From: Takeshi Kihara <takeshi.kihara.df@renesas.com>
This patch fixes the macro definitions of A20..A25 pins function deleted.
This is a correction because IPSR register specification for R8A7795 ES2.0
SoC was changed in R-Car Gen3 Hardware User's Manual Rev.0.53E.
Fixes: b205914c8f82 ("pinctrl: sh-pfc: r8a7795: Add support for R-Car H3 ES2.0")
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
---
This patch is based on the for-next branch of linux-pinctrl tree.
drivers/pinctrl/sh-pfc/pfc-r8a7795.c | 18 ++++++------------
1 file changed, 6 insertions(+), 12 deletions(-)
diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a7795.c b/drivers/pinctrl/sh-pfc/pfc-r8a7795.c
index 85699fb..b513010 100644
--- a/drivers/pinctrl/sh-pfc/pfc-r8a7795.c
+++ b/drivers/pinctrl/sh-pfc/pfc-r8a7795.c
@@ -219,12 +219,12 @@
#define IP0_27_24 FM(IRQ0) FM(QPOLB) F_(0, 0) FM(DU_CDE) FM(VI4_DATA0_B) FM(CAN0_TX_B) FM(CANFD0_TX_B) FM(MSIOF3_SS2_E) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
#define IP0_31_28 FM(IRQ1) FM(QPOLA) F_(0, 0) FM(DU_DISP) FM(VI4_DATA1_B) FM(CAN0_RX_B) FM(CANFD0_RX_B) FM(MSIOF3_SS1_E) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
#define IP1_3_0 FM(IRQ2) FM(QCPV_QDE) F_(0, 0) FM(DU_EXODDF_DU_ODDF_DISP_CDE) FM(VI4_DATA2_B) F_(0, 0) F_(0, 0) FM(MSIOF3_SYNC_E) F_(0, 0) FM(PWM3_B) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP1_7_4 FM(IRQ3) FM(QSTVB_QVE) FM(A25) FM(DU_DOTCLKOUT1) FM(VI4_DATA3_B) F_(0, 0) F_(0, 0) FM(MSIOF3_SCK_E) F_(0, 0) FM(PWM4_B) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP1_11_8 FM(IRQ4) FM(QSTH_QHS) FM(A24) FM(DU_EXHSYNC_DU_HSYNC) FM(VI4_DATA4_B) F_(0, 0) F_(0, 0) FM(MSIOF3_RXD_E) F_(0, 0) FM(PWM5_B) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP1_15_12 FM(IRQ5) FM(QSTB_QHE) FM(A23) FM(DU_EXVSYNC_DU_VSYNC) FM(VI4_DATA5_B) FM(FSCLKST2_N_B) F_(0, 0) FM(MSIOF3_TXD_E) F_(0, 0) FM(PWM6_B) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP1_19_16 FM(PWM0) FM(AVB_AVTP_PPS)FM(A22) F_(0, 0) FM(VI4_DATA6_B) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) FM(IECLK_B) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP1_23_20 FM(PWM1_A) F_(0, 0) FM(A21) FM(HRX3_D) FM(VI4_DATA7_B) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) FM(IERX_B) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP1_27_24 FM(PWM2_A) F_(0, 0) FM(A20) FM(HTX3_D) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) FM(IETX_B) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP1_7_4 FM(IRQ3) FM(QSTVB_QVE) F_(0, 0) FM(DU_DOTCLKOUT1) FM(VI4_DATA3_B) F_(0, 0) F_(0, 0) FM(MSIOF3_SCK_E) F_(0, 0) FM(PWM4_B) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP1_11_8 FM(IRQ4) FM(QSTH_QHS) F_(0, 0) FM(DU_EXHSYNC_DU_HSYNC) FM(VI4_DATA4_B) F_(0, 0) F_(0, 0) FM(MSIOF3_RXD_E) F_(0, 0) FM(PWM5_B) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP1_15_12 FM(IRQ5) FM(QSTB_QHE) F_(0, 0) FM(DU_EXVSYNC_DU_VSYNC) FM(VI4_DATA5_B) FM(FSCLKST2_N_B) F_(0, 0) FM(MSIOF3_TXD_E) F_(0, 0) FM(PWM6_B) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP1_19_16 FM(PWM0) FM(AVB_AVTP_PPS)F_(0, 0) F_(0, 0) FM(VI4_DATA6_B) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) FM(IECLK_B) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP1_23_20 FM(PWM1_A) F_(0, 0) F_(0, 0) FM(HRX3_D) FM(VI4_DATA7_B) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) FM(IERX_B) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP1_27_24 FM(PWM2_A) F_(0, 0) F_(0, 0) FM(HTX3_D) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) FM(IETX_B) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
#define IP1_31_28 FM(A0) FM(LCDOUT16) FM(MSIOF3_SYNC_B) F_(0, 0) FM(VI4_DATA8) F_(0, 0) FM(DU_DB0) F_(0, 0) F_(0, 0) FM(PWM3_A) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
#define IP2_3_0 FM(A1) FM(LCDOUT17) FM(MSIOF3_TXD_B) F_(0, 0) FM(VI4_DATA9) F_(0, 0) FM(DU_DB1) F_(0, 0) F_(0, 0) FM(PWM4_A) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
#define IP2_7_4 FM(A2) FM(LCDOUT18) FM(MSIOF3_SCK_B) F_(0, 0) FM(VI4_DATA10) F_(0, 0) FM(DU_DB2) F_(0, 0) F_(0, 0) FM(PWM5_A) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
@@ -652,7 +652,6 @@ enum {
PINMUX_IPSR_GPSR(IP1_7_4, IRQ3),
PINMUX_IPSR_GPSR(IP1_7_4, QSTVB_QVE),
- PINMUX_IPSR_GPSR(IP1_7_4, A25),
PINMUX_IPSR_GPSR(IP1_7_4, DU_DOTCLKOUT1),
PINMUX_IPSR_MSEL(IP1_7_4, VI4_DATA3_B, SEL_VIN4_1),
PINMUX_IPSR_MSEL(IP1_7_4, PWM4_B, SEL_PWM4_1),
@@ -660,7 +659,6 @@ enum {
PINMUX_IPSR_GPSR(IP1_11_8, IRQ4),
PINMUX_IPSR_GPSR(IP1_11_8, QSTH_QHS),
- PINMUX_IPSR_GPSR(IP1_11_8, A24),
PINMUX_IPSR_GPSR(IP1_11_8, DU_EXHSYNC_DU_HSYNC),
PINMUX_IPSR_MSEL(IP1_11_8, VI4_DATA4_B, SEL_VIN4_1),
PINMUX_IPSR_MSEL(IP1_11_8, PWM5_B, SEL_PWM5_1),
@@ -668,7 +666,6 @@ enum {
PINMUX_IPSR_GPSR(IP1_15_12, IRQ5),
PINMUX_IPSR_GPSR(IP1_15_12, QSTB_QHE),
- PINMUX_IPSR_GPSR(IP1_15_12, A23),
PINMUX_IPSR_GPSR(IP1_15_12, DU_EXVSYNC_DU_VSYNC),
PINMUX_IPSR_MSEL(IP1_15_12, VI4_DATA5_B, SEL_VIN4_1),
PINMUX_IPSR_MSEL(IP1_15_12, PWM6_B, SEL_PWM6_1),
@@ -677,18 +674,15 @@ enum {
PINMUX_IPSR_GPSR(IP1_19_16, PWM0),
PINMUX_IPSR_GPSR(IP1_19_16, AVB_AVTP_PPS),
- PINMUX_IPSR_GPSR(IP1_19_16, A22),
PINMUX_IPSR_MSEL(IP1_19_16, VI4_DATA6_B, SEL_VIN4_1),
PINMUX_IPSR_MSEL(IP1_19_16, IECLK_B, SEL_IEBUS_1),
PINMUX_IPSR_MSEL(IP1_23_20, PWM1_A, SEL_PWM1_0),
- PINMUX_IPSR_GPSR(IP1_23_20, A21),
PINMUX_IPSR_MSEL(IP1_23_20, HRX3_D, SEL_HSCIF3_3),
PINMUX_IPSR_MSEL(IP1_23_20, VI4_DATA7_B, SEL_VIN4_1),
PINMUX_IPSR_MSEL(IP1_23_20, IERX_B, SEL_IEBUS_1),
PINMUX_IPSR_MSEL(IP1_27_24, PWM2_A, SEL_PWM2_0),
- PINMUX_IPSR_GPSR(IP1_27_24, A20),
PINMUX_IPSR_MSEL(IP1_27_24, HTX3_D, SEL_HSCIF3_3),
PINMUX_IPSR_MSEL(IP1_27_24, IETX_B, SEL_IEBUS_1),
--
1.9.1
next reply other threads:[~2017-11-16 3:16 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-11-16 3:16 Yoshihiro Kaneko [this message]
2017-11-23 10:32 ` [PATCH] pinctrl: sh-pfc: r8a7795: Fix to delete A20..A25 pins function definitions Geert Uytterhoeven
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1510802208-30703-1-git-send-email-ykaneko0929@gmail.com \
--to=ykaneko0929@gmail.com \
--cc=geert+renesas@glider.be \
--cc=horms@verge.net.au \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).