From: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
To: Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
Geert Uytterhoeven <geert+renesas@glider.be>,
Linus Walleij <linus.walleij@linaro.org>
Cc: Fabrizio Castro <fabrizio.castro@bp.renesas.com>,
linux-renesas-soc@vger.kernel.org, linux-gpio@vger.kernel.org,
Simon Horman <horms@verge.net.au>,
Chris Paterson <Chris.Paterson2@renesas.com>,
Biju Das <biju.das@bp.renesas.com>
Subject: [PATCH v2 1/4] pinctrl: sh-pfc: r8a7794: Add PWM[0123456] support
Date: Mon, 18 Dec 2017 18:06:48 +0000 [thread overview]
Message-ID: <1513620411-17478-2-git-send-email-fabrizio.castro@bp.renesas.com> (raw)
In-Reply-To: <1513620411-17478-1-git-send-email-fabrizio.castro@bp.renesas.com>
This patch adds PFC PWM[0123456] pin groups and functions, enabling
PWM on the r8a7794 and r8a7745.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
v1->v2:
* No change
drivers/pinctrl/sh-pfc/pfc-r8a7794.c | 165 +++++++++++++++++++++++++++++++++++
1 file changed, 165 insertions(+)
diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a7794.c b/drivers/pinctrl/sh-pfc/pfc-r8a7794.c
index c557bc8..dccc20a 100644
--- a/drivers/pinctrl/sh-pfc/pfc-r8a7794.c
+++ b/drivers/pinctrl/sh-pfc/pfc-r8a7794.c
@@ -2546,6 +2546,109 @@ static const unsigned int msiof2_tx_b_pins[] = {
static const unsigned int msiof2_tx_b_mux[] = {
MSIOF2_TXD_B_MARK,
};
+/* - PWM -------------------------------------------------------------------- */
+static const unsigned int pwm0_pins[] = {
+ RCAR_GP_PIN(1, 14),
+};
+static const unsigned int pwm0_mux[] = {
+ PWM0_MARK,
+};
+static const unsigned int pwm0_b_pins[] = {
+ RCAR_GP_PIN(5, 3),
+};
+static const unsigned int pwm0_b_mux[] = {
+ PWM0_B_MARK,
+};
+static const unsigned int pwm1_pins[] = {
+ RCAR_GP_PIN(4, 5),
+};
+static const unsigned int pwm1_mux[] = {
+ PWM1_MARK,
+};
+static const unsigned int pwm1_b_pins[] = {
+ RCAR_GP_PIN(5, 10),
+};
+static const unsigned int pwm1_b_mux[] = {
+ PWM1_B_MARK,
+};
+static const unsigned int pwm1_c_pins[] = {
+ RCAR_GP_PIN(1, 18),
+};
+static const unsigned int pwm1_c_mux[] = {
+ PWM1_C_MARK,
+};
+static const unsigned int pwm2_pins[] = {
+ RCAR_GP_PIN(4, 10),
+};
+static const unsigned int pwm2_mux[] = {
+ PWM2_MARK,
+};
+static const unsigned int pwm2_b_pins[] = {
+ RCAR_GP_PIN(5, 17),
+};
+static const unsigned int pwm2_b_mux[] = {
+ PWM2_B_MARK,
+};
+static const unsigned int pwm2_c_pins[] = {
+ RCAR_GP_PIN(0, 13),
+};
+static const unsigned int pwm2_c_mux[] = {
+ PWM2_C_MARK,
+};
+static const unsigned int pwm3_pins[] = {
+ RCAR_GP_PIN(4, 13),
+};
+static const unsigned int pwm3_mux[] = {
+ PWM3_MARK,
+};
+static const unsigned int pwm3_b_pins[] = {
+ RCAR_GP_PIN(0, 16),
+};
+static const unsigned int pwm3_b_mux[] = {
+ PWM3_B_MARK,
+};
+static const unsigned int pwm4_pins[] = {
+ RCAR_GP_PIN(1, 3),
+};
+static const unsigned int pwm4_mux[] = {
+ PWM4_MARK,
+};
+static const unsigned int pwm4_b_pins[] = {
+ RCAR_GP_PIN(0, 21),
+};
+static const unsigned int pwm4_b_mux[] = {
+ PWM4_B_MARK,
+};
+static const unsigned int pwm5_pins[] = {
+ RCAR_GP_PIN(3, 30),
+};
+static const unsigned int pwm5_mux[] = {
+ PWM5_MARK,
+};
+static const unsigned int pwm5_b_pins[] = {
+ RCAR_GP_PIN(4, 0),
+};
+static const unsigned int pwm5_b_mux[] = {
+ PWM5_B_MARK,
+};
+static const unsigned int pwm5_c_pins[] = {
+ RCAR_GP_PIN(0, 10),
+};
+static const unsigned int pwm5_c_mux[] = {
+ PWM5_C_MARK,
+};
+static const unsigned int pwm6_pins[] = {
+ RCAR_GP_PIN(4, 8),
+};
+static const unsigned int pwm6_mux[] = {
+ PWM6_MARK,
+};
+static const unsigned int pwm6_b_pins[] = {
+ RCAR_GP_PIN(0, 7),
+};
+static const unsigned int pwm6_b_mux[] = {
+ PWM6_B_MARK,
+};
/* - QSPI ------------------------------------------------------------------- */
static const unsigned int qspi_ctrl_pins[] = {
/* SPCLK, SSL */
@@ -3689,6 +3792,23 @@ static const struct sh_pfc_pin_group pinmux_groups[] = {
SH_PFC_PIN_GROUP(msiof2_ss2_b),
SH_PFC_PIN_GROUP(msiof2_rx_b),
SH_PFC_PIN_GROUP(msiof2_tx_b),
+ SH_PFC_PIN_GROUP(pwm0),
+ SH_PFC_PIN_GROUP(pwm0_b),
+ SH_PFC_PIN_GROUP(pwm1),
+ SH_PFC_PIN_GROUP(pwm1_b),
+ SH_PFC_PIN_GROUP(pwm1_c),
+ SH_PFC_PIN_GROUP(pwm2),
+ SH_PFC_PIN_GROUP(pwm2_b),
+ SH_PFC_PIN_GROUP(pwm2_c),
+ SH_PFC_PIN_GROUP(pwm3),
+ SH_PFC_PIN_GROUP(pwm3_b),
+ SH_PFC_PIN_GROUP(pwm4),
+ SH_PFC_PIN_GROUP(pwm4_b),
+ SH_PFC_PIN_GROUP(pwm5),
+ SH_PFC_PIN_GROUP(pwm5_b),
+ SH_PFC_PIN_GROUP(pwm5_c),
+ SH_PFC_PIN_GROUP(pwm6),
+ SH_PFC_PIN_GROUP(pwm6_b),
SH_PFC_PIN_GROUP(qspi_ctrl),
SH_PFC_PIN_GROUP(qspi_data2),
SH_PFC_PIN_GROUP(qspi_data4),
@@ -4050,6 +4170,44 @@ static const char * const msiof2_groups[] = {
"msiof2_tx_b",
};
+static const char * const pwm0_groups[] = {
+ "pwm0",
+ "pwm0_b",
+};
+
+static const char * const pwm1_groups[] = {
+ "pwm1",
+ "pwm1_b",
+ "pwm1_c",
+};
+
+static const char * const pwm2_groups[] = {
+ "pwm2",
+ "pwm2_b",
+ "pwm2_c",
+};
+
+static const char * const pwm3_groups[] = {
+ "pwm3",
+ "pwm3_b",
+};
+
+static const char * const pwm4_groups[] = {
+ "pwm4",
+ "pwm4_b",
+};
+
+static const char * const pwm5_groups[] = {
+ "pwm5",
+ "pwm5_b",
+ "pwm5_c",
+};
+
+static const char * const pwm6_groups[] = {
+ "pwm6",
+ "pwm6_b",
+};
+
static const char * const qspi_groups[] = {
"qspi_ctrl",
"qspi_data2",
@@ -4284,6 +4442,13 @@ static const struct sh_pfc_function pinmux_functions[] = {
SH_PFC_FUNCTION(msiof0),
SH_PFC_FUNCTION(msiof1),
SH_PFC_FUNCTION(msiof2),
+ SH_PFC_FUNCTION(pwm0),
+ SH_PFC_FUNCTION(pwm1),
+ SH_PFC_FUNCTION(pwm2),
+ SH_PFC_FUNCTION(pwm3),
+ SH_PFC_FUNCTION(pwm4),
+ SH_PFC_FUNCTION(pwm5),
+ SH_PFC_FUNCTION(pwm6),
SH_PFC_FUNCTION(qspi),
SH_PFC_FUNCTION(scif0),
SH_PFC_FUNCTION(scif1),
--
2.7.4
next prev parent reply other threads:[~2017-12-18 18:06 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-18 18:06 [PATCH v2 0/4] Add PWM and TPU support to r8a7745 Fabrizio Castro
2017-12-18 18:06 ` Fabrizio Castro [this message]
2017-12-18 18:06 ` [PATCH v2 3/4] pinctrl: sh-pfc: r8a7794: Add tpu groups and function Fabrizio Castro
2017-12-19 9:15 ` Geert Uytterhoeven
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1513620411-17478-2-git-send-email-fabrizio.castro@bp.renesas.com \
--to=fabrizio.castro@bp.renesas.com \
--cc=Chris.Paterson2@renesas.com \
--cc=biju.das@bp.renesas.com \
--cc=geert+renesas@glider.be \
--cc=horms@verge.net.au \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).