[PATCH v2 0/2] pinctrl/samsung: Fix incorrect EINTG banks order

linux-gpio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed

* [PATCH v2 0/2] pinctrl/samsung: Fix incorrect EINTG banks order
@ 2018-04-16 15:52 Paweł Chmiel
  2018-04-16 15:52 ` [PATCH v2 1/2] pinctrl/samsung: Correct " Paweł Chmiel
  2018-04-16 15:52 ` [PATCH v2 2/2] pinctrl/samsung: Document required order of banks Paweł Chmiel
  0 siblings, 2 replies; 8+ messages in thread
From: Paweł Chmiel @ 2018-04-16 15:52 UTC (permalink / raw)
  To: tomasz.figa, krzk, s.nawrocki
  Cc: linus.walleij, kgene, linux-arm-kernel, linux-samsung-soc,
	linux-gpio, linux-kernel, Paweł Chmiel

This patch series compose of 2 patches.

First patch, fixing incorrect order of banks for s5pv210 and exynos5410

Second patch, documenting required order of banks

Changes from v1:
  - Limit changes to s5pv210 and Exynos5410. Exynos3250 will be handled later.
  - Added cc stable
  - Added fixes tag
  - Add patch with comments to all banks documenting required order.

Paweł Chmiel (2):
  pinctrl/samsung: Correct EINTG banks order
  pinctrl/samsung: Document required order of banks

 drivers/pinctrl/samsung/pinctrl-exynos-arm.c   | 30 ++++++++++++++++++++++++--
 drivers/pinctrl/samsung/pinctrl-exynos-arm64.c | 20 +++++++++++++++++
 2 files changed, 48 insertions(+), 2 deletions(-)

-- 
2.7.4

^ permalink raw reply	[flat|nested] 8+ messages in thread

* [PATCH v2 1/2] pinctrl/samsung: Correct EINTG banks order
  2018-04-16 15:52 [PATCH v2 0/2] pinctrl/samsung: Fix incorrect EINTG banks order Paweł Chmiel
@ 2018-04-16 15:52 ` Paweł Chmiel
  2018-04-17  2:12   ` Tomasz Figa
  2018-04-16 15:52 ` [PATCH v2 2/2] pinctrl/samsung: Document required order of banks Paweł Chmiel
  1 sibling, 1 reply; 8+ messages in thread
From: Paweł Chmiel @ 2018-04-16 15:52 UTC (permalink / raw)
  To: tomasz.figa, krzk, s.nawrocki
  Cc: linus.walleij, kgene, linux-arm-kernel, linux-samsung-soc,
	linux-gpio, linux-kernel, Paweł Chmiel, stable

All banks with GPIO interrupts should be at beginning
of bank array and without any other types of banks between them.
This order is expected by exynos_eint_gpio_irq, when doing
interrupt group to bank translation.
Otherwise, kernel NULL pointer dereference would happen
when trying to handle interrupt, due to wrong bank being looked up.
Observed on s5pv210, when trying to handle gpj0 interrupt,
where kernel was mapping it to gpi bank.

Cc: stable@vger.kernel.org
Fixes: 023e06dfa6882f500b9c86fd61f0b1913aa07f36 ("pinctrl: exynos: add exynos5410 SoC specific data")
Fixes: 608a26a7bc04a39cfd7041f31ca2b2100113d14e ("pinctrl: Add s5pv210 support to pinctrl-exynos)
Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
---

Changes from v1:
  - Limit changes to s5pv210 and Exynos5410. Exynos3250 will be handled later.
  - Added cc stable
  - Added fixes tag
---
 drivers/pinctrl/samsung/pinctrl-exynos-arm.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/pinctrl/samsung/pinctrl-exynos-arm.c b/drivers/pinctrl/samsung/pinctrl-exynos-arm.c
index 90c2744..4f4ae66 100644
--- a/drivers/pinctrl/samsung/pinctrl-exynos-arm.c
+++ b/drivers/pinctrl/samsung/pinctrl-exynos-arm.c
@@ -105,12 +105,12 @@ static const struct samsung_pin_bank_data s5pv210_pin_bank[] __initconst = {
 	EXYNOS_PIN_BANK_EINTG(7, 0x1c0, "gpg1", 0x38),
 	EXYNOS_PIN_BANK_EINTG(7, 0x1e0, "gpg2", 0x3c),
 	EXYNOS_PIN_BANK_EINTG(7, 0x200, "gpg3", 0x40),
-	EXYNOS_PIN_BANK_EINTN(7, 0x220, "gpi"),
 	EXYNOS_PIN_BANK_EINTG(8, 0x240, "gpj0", 0x44),
 	EXYNOS_PIN_BANK_EINTG(6, 0x260, "gpj1", 0x48),
 	EXYNOS_PIN_BANK_EINTG(8, 0x280, "gpj2", 0x4c),
 	EXYNOS_PIN_BANK_EINTG(8, 0x2a0, "gpj3", 0x50),
 	EXYNOS_PIN_BANK_EINTG(5, 0x2c0, "gpj4", 0x54),
+	EXYNOS_PIN_BANK_EINTN(7, 0x220, "gpi"),
 	EXYNOS_PIN_BANK_EINTN(8, 0x2e0, "mp01"),
 	EXYNOS_PIN_BANK_EINTN(4, 0x300, "mp02"),
 	EXYNOS_PIN_BANK_EINTN(8, 0x320, "mp03"),
@@ -630,7 +630,6 @@ static const struct samsung_pin_bank_data exynos5410_pin_banks0[] __initconst =
 	EXYNOS_PIN_BANK_EINTG(4, 0x100, "gpc3", 0x20),
 	EXYNOS_PIN_BANK_EINTG(7, 0x120, "gpc1", 0x24),
 	EXYNOS_PIN_BANK_EINTG(7, 0x140, "gpc2", 0x28),
-	EXYNOS_PIN_BANK_EINTN(2, 0x160, "gpm5"),
 	EXYNOS_PIN_BANK_EINTG(8, 0x180, "gpd1", 0x2c),
 	EXYNOS_PIN_BANK_EINTG(8, 0x1A0, "gpe0", 0x30),
 	EXYNOS_PIN_BANK_EINTG(2, 0x1C0, "gpe1", 0x34),
@@ -641,6 +640,7 @@ static const struct samsung_pin_bank_data exynos5410_pin_banks0[] __initconst =
 	EXYNOS_PIN_BANK_EINTG(2, 0x260, "gpg2", 0x48),
 	EXYNOS_PIN_BANK_EINTG(4, 0x280, "gph0", 0x4c),
 	EXYNOS_PIN_BANK_EINTG(8, 0x2A0, "gph1", 0x50),
+	EXYNOS_PIN_BANK_EINTN(2, 0x160, "gpm5"),
 	EXYNOS_PIN_BANK_EINTN(8, 0x2C0, "gpm7"),
 	EXYNOS_PIN_BANK_EINTN(6, 0x2E0, "gpy0"),
 	EXYNOS_PIN_BANK_EINTN(4, 0x300, "gpy1"),
-- 
2.7.4

^ permalink raw reply related	[flat|nested] 8+ messages in thread

* Re: [PATCH v2 1/2] pinctrl/samsung: Correct EINTG banks order
  2018-04-16 15:52 ` [PATCH v2 1/2] pinctrl/samsung: Correct " Paweł Chmiel
@ 2018-04-17  2:12   ` Tomasz Figa
  2018-04-18 15:47     ` Krzysztof Kozlowski
  0 siblings, 1 reply; 8+ messages in thread
From: Tomasz Figa @ 2018-04-17  2:12 UTC (permalink / raw)
  To: Paweł Chmiel
  Cc: Krzysztof Kozlowski, Sylwester Nawrocki, linus.walleij@linaro.org,
	Kukjin Kim, linux-arm-kernel,
	moderated list:SAMSUNG SOC CLOCK DRIVERS, linux-gpio,
	linux-kernel, stable

2018-04-17 0:52 GMT+09:00 Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>:
> All banks with GPIO interrupts should be at beginning
> of bank array and without any other types of banks between them.
> This order is expected by exynos_eint_gpio_irq, when doing
> interrupt group to bank translation.
> Otherwise, kernel NULL pointer dereference would happen
> when trying to handle interrupt, due to wrong bank being looked up.
> Observed on s5pv210, when trying to handle gpj0 interrupt,
> where kernel was mapping it to gpi bank.
>
> Cc: stable@vger.kernel.org
> Fixes: 023e06dfa6882f500b9c86fd61f0b1913aa07f36 ("pinctrl: exynos: add exynos5410 SoC specific data")
> Fixes: 608a26a7bc04a39cfd7041f31ca2b2100113d14e ("pinctrl: Add s5pv210 support to pinctrl-exynos)
> Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
> ---
>
> Changes from v1:
>   - Limit changes to s5pv210 and Exynos5410. Exynos3250 will be handled later.
>   - Added cc stable
>   - Added fixes tag
> ---
>  drivers/pinctrl/samsung/pinctrl-exynos-arm.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)

Reviewed-by: Tomasz Figa <tomasz.figa@gmail.com>

Thanks for the patch!

Best regards,
Tomasz

^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [PATCH v2 1/2] pinctrl/samsung: Correct EINTG banks order
  2018-04-17  2:12   ` Tomasz Figa
@ 2018-04-18 15:47     ` Krzysztof Kozlowski
  2018-04-26 23:04       ` Linus Walleij
  0 siblings, 1 reply; 8+ messages in thread
From: Krzysztof Kozlowski @ 2018-04-18 15:47 UTC (permalink / raw)
  To: Tomasz Figa
  Cc: Paweł Chmiel, Sylwester Nawrocki, linus.walleij@linaro.org,
	Kukjin Kim, linux-arm-kernel,
	moderated list:SAMSUNG SOC CLOCK DRIVERS, linux-gpio,
	linux-kernel, stable

On Tue, Apr 17, 2018 at 4:12 AM, Tomasz Figa <tomasz.figa@gmail.com> wrote:
> 2018-04-17 0:52 GMT+09:00 Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>:
>> All banks with GPIO interrupts should be at beginning
>> of bank array and without any other types of banks between them.
>> This order is expected by exynos_eint_gpio_irq, when doing
>> interrupt group to bank translation.
>> Otherwise, kernel NULL pointer dereference would happen
>> when trying to handle interrupt, due to wrong bank being looked up.
>> Observed on s5pv210, when trying to handle gpj0 interrupt,
>> where kernel was mapping it to gpi bank.
>>
>> Cc: stable@vger.kernel.org
>> Fixes: 023e06dfa6882f500b9c86fd61f0b1913aa07f36 ("pinctrl: exynos: add exynos5410 SoC specific data")
>> Fixes: 608a26a7bc04a39cfd7041f31ca2b2100113d14e ("pinctrl: Add s5pv210 support to pinctrl-exynos)

Use short SHA (for example: git config --global core.abbrev 12; git
config --global pretty.fixes 'Fixes: %h ("%s")' ; git config --global
alias.sf 'show --pretty=fixes' ; git sf COMMIT).

The subject prefix should be "pinctrl: samsung:" (git log --oneline --
drivers/pinctrl/samsung/).

I fixed this, re-wrapped commit for 72-column and applied to my tree.

Linus,
I'll send them to you in pull request for next release cycle.

Best regards,
Krzysztof

^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [PATCH v2 1/2] pinctrl/samsung: Correct EINTG banks order
  2018-04-18 15:47     ` Krzysztof Kozlowski
@ 2018-04-26 23:04       ` Linus Walleij
  0 siblings, 0 replies; 8+ messages in thread
From: Linus Walleij @ 2018-04-26 23:04 UTC (permalink / raw)
  To: Krzysztof Kozlowski
  Cc: Tomasz Figa, Paweł Chmiel, Sylwester Nawrocki, Kukjin Kim,
	linux-arm-kernel, moderated list:SAMSUNG SOC CLOCK DRIVERS,
	open list:GPIO SUBSYSTEM, linux-kernel, stable

On Wed, Apr 18, 2018 at 5:47 PM, Krzysztof Kozlowski <krzk@kernel.org> wrote:

> I fixed this, re-wrapped commit for 72-column and applied to my tree.
>
> Linus,
> I'll send them to you in pull request for next release cycle.

OK waiting for that.

Yours,
Linus Walleij

^ permalink raw reply	[flat|nested] 8+ messages in thread

* [PATCH v2 2/2] pinctrl/samsung: Document required order of banks
  2018-04-16 15:52 [PATCH v2 0/2] pinctrl/samsung: Fix incorrect EINTG banks order Paweł Chmiel
  2018-04-16 15:52 ` [PATCH v2 1/2] pinctrl/samsung: Correct " Paweł Chmiel
@ 2018-04-16 15:52 ` Paweł Chmiel
  2018-04-17  2:14   ` Tomasz Figa
  1 sibling, 1 reply; 8+ messages in thread
From: Paweł Chmiel @ 2018-04-16 15:52 UTC (permalink / raw)
  To: tomasz.figa, krzk, s.nawrocki
  Cc: linus.walleij, kgene, linux-arm-kernel, linux-samsung-soc,
	linux-gpio, linux-kernel, Paweł Chmiel, stable

This patch documents requirement coming from the way
exynos_eint_gpio_irq() is working now, which expects
EINTG banks to be at the beginning of the bank arrays.

Cc: stable@vger.kernel.org
Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
---
 drivers/pinctrl/samsung/pinctrl-exynos-arm.c   | 26 ++++++++++++++++++++++++++
 drivers/pinctrl/samsung/pinctrl-exynos-arm64.c | 20 ++++++++++++++++++++
 2 files changed, 46 insertions(+)

diff --git a/drivers/pinctrl/samsung/pinctrl-exynos-arm.c b/drivers/pinctrl/samsung/pinctrl-exynos-arm.c
index 4f4ae66..d82820f 100644
--- a/drivers/pinctrl/samsung/pinctrl-exynos-arm.c
+++ b/drivers/pinctrl/samsung/pinctrl-exynos-arm.c
@@ -88,6 +88,7 @@ static const struct samsung_retention_data s5pv210_retention_data __initconst =
 
 /* pin banks of s5pv210 pin-controller */
 static const struct samsung_pin_bank_data s5pv210_pin_bank[] __initconst = {
+	/* Must start with EINTG banks, ordered by EINT group number. */
 	EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpa0", 0x00),
 	EXYNOS_PIN_BANK_EINTG(4, 0x020, "gpa1", 0x04),
 	EXYNOS_PIN_BANK_EINTG(8, 0x040, "gpb", 0x08),
@@ -147,6 +148,7 @@ static atomic_t exynos_shared_retention_refcnt;
 
 /* pin banks of exynos3250 pin-controller 0 */
 static const struct samsung_pin_bank_data exynos3250_pin_banks0[] __initconst = {
+	/* Must start with EINTG banks, ordered by EINT group number. */
 	EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpa0", 0x00),
 	EXYNOS_PIN_BANK_EINTG(6, 0x020, "gpa1", 0x04),
 	EXYNOS_PIN_BANK_EINTG(8, 0x040, "gpb",  0x08),
@@ -158,6 +160,7 @@ static const struct samsung_pin_bank_data exynos3250_pin_banks0[] __initconst =
 
 /* pin banks of exynos3250 pin-controller 1 */
 static const struct samsung_pin_bank_data exynos3250_pin_banks1[] __initconst = {
+	/* Must start with EINTG banks, ordered by EINT group number. */
 	EXYNOS_PIN_BANK_EINTN(8, 0x120, "gpe0"),
 	EXYNOS_PIN_BANK_EINTN(8, 0x140, "gpe1"),
 	EXYNOS_PIN_BANK_EINTN(3, 0x180, "gpe2"),
@@ -232,6 +235,7 @@ const struct samsung_pinctrl_of_match_data exynos3250_of_data __initconst = {
 
 /* pin banks of exynos4210 pin-controller 0 */
 static const struct samsung_pin_bank_data exynos4210_pin_banks0[] __initconst = {
+	/* Must start with EINTG banks, ordered by EINT group number. */
 	EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpa0", 0x00),
 	EXYNOS_PIN_BANK_EINTG(6, 0x020, "gpa1", 0x04),
 	EXYNOS_PIN_BANK_EINTG(8, 0x040, "gpb", 0x08),
@@ -252,6 +256,7 @@ static const struct samsung_pin_bank_data exynos4210_pin_banks0[] __initconst =
 
 /* pin banks of exynos4210 pin-controller 1 */
 static const struct samsung_pin_bank_data exynos4210_pin_banks1[] __initconst = {
+	/* Must start with EINTG banks, ordered by EINT group number. */
 	EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpj0", 0x00),
 	EXYNOS_PIN_BANK_EINTG(5, 0x020, "gpj1", 0x04),
 	EXYNOS_PIN_BANK_EINTG(7, 0x040, "gpk0", 0x08),
@@ -276,6 +281,7 @@ static const struct samsung_pin_bank_data exynos4210_pin_banks1[] __initconst =
 
 /* pin banks of exynos4210 pin-controller 2 */
 static const struct samsung_pin_bank_data exynos4210_pin_banks2[] __initconst = {
+	/* Must start with EINTG banks, ordered by EINT group number. */
 	EXYNOS_PIN_BANK_EINTN(7, 0x000, "gpz"),
 };
 
@@ -346,6 +352,7 @@ const struct samsung_pinctrl_of_match_data exynos4210_of_data __initconst = {
 
 /* pin banks of exynos4x12 pin-controller 0 */
 static const struct samsung_pin_bank_data exynos4x12_pin_banks0[] __initconst = {
+	/* Must start with EINTG banks, ordered by EINT group number. */
 	EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpa0", 0x00),
 	EXYNOS_PIN_BANK_EINTG(6, 0x020, "gpa1", 0x04),
 	EXYNOS_PIN_BANK_EINTG(8, 0x040, "gpb", 0x08),
@@ -363,6 +370,7 @@ static const struct samsung_pin_bank_data exynos4x12_pin_banks0[] __initconst =
 
 /* pin banks of exynos4x12 pin-controller 1 */
 static const struct samsung_pin_bank_data exynos4x12_pin_banks1[] __initconst = {
+	/* Must start with EINTG banks, ordered by EINT group number. */
 	EXYNOS_PIN_BANK_EINTG(7, 0x040, "gpk0", 0x08),
 	EXYNOS_PIN_BANK_EINTG(7, 0x060, "gpk1", 0x0c),
 	EXYNOS_PIN_BANK_EINTG(7, 0x080, "gpk2", 0x10),
@@ -390,11 +398,13 @@ static const struct samsung_pin_bank_data exynos4x12_pin_banks1[] __initconst =
 
 /* pin banks of exynos4x12 pin-controller 2 */
 static const struct samsung_pin_bank_data exynos4x12_pin_banks2[] __initconst = {
+	/* Must start with EINTG banks, ordered by EINT group number. */
 	EXYNOS_PIN_BANK_EINTG(7, 0x000, "gpz", 0x00),
 };
 
 /* pin banks of exynos4x12 pin-controller 3 */
 static const struct samsung_pin_bank_data exynos4x12_pin_banks3[] __initconst = {
+	/* Must start with EINTG banks, ordered by EINT group number. */
 	EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpv0", 0x00),
 	EXYNOS_PIN_BANK_EINTG(8, 0x020, "gpv1", 0x04),
 	EXYNOS_PIN_BANK_EINTG(8, 0x040, "gpv2", 0x08),
@@ -449,6 +459,7 @@ const struct samsung_pinctrl_of_match_data exynos4x12_of_data __initconst = {
 
 /* pin banks of exynos5250 pin-controller 0 */
 static const struct samsung_pin_bank_data exynos5250_pin_banks0[] __initconst = {
+	/* Must start with EINTG banks, ordered by EINT group number. */
 	EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpa0", 0x00),
 	EXYNOS_PIN_BANK_EINTG(6, 0x020, "gpa1", 0x04),
 	EXYNOS_PIN_BANK_EINTG(8, 0x040, "gpa2", 0x08),
@@ -478,6 +489,7 @@ static const struct samsung_pin_bank_data exynos5250_pin_banks0[] __initconst =
 
 /* pin banks of exynos5250 pin-controller 1 */
 static const struct samsung_pin_bank_data exynos5250_pin_banks1[] __initconst = {
+	/* Must start with EINTG banks, ordered by EINT group number. */
 	EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpe0", 0x00),
 	EXYNOS_PIN_BANK_EINTG(2, 0x020, "gpe1", 0x04),
 	EXYNOS_PIN_BANK_EINTG(4, 0x040, "gpf0", 0x08),
@@ -491,6 +503,7 @@ static const struct samsung_pin_bank_data exynos5250_pin_banks1[] __initconst =
 
 /* pin banks of exynos5250 pin-controller 2 */
 static const struct samsung_pin_bank_data exynos5250_pin_banks2[] __initconst = {
+	/* Must start with EINTG banks, ordered by EINT group number. */
 	EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpv0", 0x00),
 	EXYNOS_PIN_BANK_EINTG(8, 0x020, "gpv1", 0x04),
 	EXYNOS_PIN_BANK_EINTG(8, 0x060, "gpv2", 0x08),
@@ -500,6 +513,7 @@ static const struct samsung_pin_bank_data exynos5250_pin_banks2[] __initconst =
 
 /* pin banks of exynos5250 pin-controller 3 */
 static const struct samsung_pin_bank_data exynos5250_pin_banks3[] __initconst = {
+	/* Must start with EINTG banks, ordered by EINT group number. */
 	EXYNOS_PIN_BANK_EINTG(7, 0x000, "gpz", 0x00),
 };
 
@@ -550,6 +564,7 @@ const struct samsung_pinctrl_of_match_data exynos5250_of_data __initconst = {
 
 /* pin banks of exynos5260 pin-controller 0 */
 static const struct samsung_pin_bank_data exynos5260_pin_banks0[] __initconst = {
+	/* Must start with EINTG banks, ordered by EINT group number. */
 	EXYNOS_PIN_BANK_EINTG(4, 0x000, "gpa0", 0x00),
 	EXYNOS_PIN_BANK_EINTG(7, 0x020, "gpa1", 0x04),
 	EXYNOS_PIN_BANK_EINTG(8, 0x040, "gpa2", 0x08),
@@ -575,6 +590,7 @@ static const struct samsung_pin_bank_data exynos5260_pin_banks0[] __initconst =
 
 /* pin banks of exynos5260 pin-controller 1 */
 static const struct samsung_pin_bank_data exynos5260_pin_banks1[] __initconst = {
+	/* Must start with EINTG banks, ordered by EINT group number. */
 	EXYNOS_PIN_BANK_EINTG(7, 0x000, "gpc0", 0x00),
 	EXYNOS_PIN_BANK_EINTG(6, 0x020, "gpc1", 0x04),
 	EXYNOS_PIN_BANK_EINTG(7, 0x040, "gpc2", 0x08),
@@ -584,6 +600,7 @@ static const struct samsung_pin_bank_data exynos5260_pin_banks1[] __initconst =
 
 /* pin banks of exynos5260 pin-controller 2 */
 static const struct samsung_pin_bank_data exynos5260_pin_banks2[] __initconst = {
+	/* Must start with EINTG banks, ordered by EINT group number. */
 	EXYNOS_PIN_BANK_EINTG(7, 0x000, "gpz0", 0x00),
 	EXYNOS_PIN_BANK_EINTG(4, 0x020, "gpz1", 0x04),
 };
@@ -619,6 +636,7 @@ const struct samsung_pinctrl_of_match_data exynos5260_of_data __initconst = {
 
 /* pin banks of exynos5410 pin-controller 0 */
 static const struct samsung_pin_bank_data exynos5410_pin_banks0[] __initconst = {
+	/* Must start with EINTG banks, ordered by EINT group number. */
 	EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpa0", 0x00),
 	EXYNOS_PIN_BANK_EINTG(6, 0x020, "gpa1", 0x04),
 	EXYNOS_PIN_BANK_EINTG(8, 0x040, "gpa2", 0x08),
@@ -658,6 +676,7 @@ static const struct samsung_pin_bank_data exynos5410_pin_banks0[] __initconst =
 
 /* pin banks of exynos5410 pin-controller 1 */
 static const struct samsung_pin_bank_data exynos5410_pin_banks1[] __initconst = {
+	/* Must start with EINTG banks, ordered by EINT group number. */
 	EXYNOS_PIN_BANK_EINTG(5, 0x000, "gpj0", 0x00),
 	EXYNOS_PIN_BANK_EINTG(8, 0x020, "gpj1", 0x04),
 	EXYNOS_PIN_BANK_EINTG(8, 0x040, "gpj2", 0x08),
@@ -671,6 +690,7 @@ static const struct samsung_pin_bank_data exynos5410_pin_banks1[] __initconst =
 
 /* pin banks of exynos5410 pin-controller 2 */
 static const struct samsung_pin_bank_data exynos5410_pin_banks2[] __initconst = {
+	/* Must start with EINTG banks, ordered by EINT group number. */
 	EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpv0", 0x00),
 	EXYNOS_PIN_BANK_EINTG(8, 0x020, "gpv1", 0x04),
 	EXYNOS_PIN_BANK_EINTG(8, 0x060, "gpv2", 0x08),
@@ -680,6 +700,7 @@ static const struct samsung_pin_bank_data exynos5410_pin_banks2[] __initconst =
 
 /* pin banks of exynos5410 pin-controller 3 */
 static const struct samsung_pin_bank_data exynos5410_pin_banks3[] __initconst = {
+	/* Must start with EINTG banks, ordered by EINT group number. */
 	EXYNOS_PIN_BANK_EINTG(7, 0x000, "gpz", 0x00),
 };
 
@@ -727,6 +748,7 @@ const struct samsung_pinctrl_of_match_data exynos5410_of_data __initconst = {
 
 /* pin banks of exynos5420 pin-controller 0 */
 static const struct samsung_pin_bank_data exynos5420_pin_banks0[] __initconst = {
+	/* Must start with EINTG banks, ordered by EINT group number. */
 	EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpy7", 0x00),
 	EXYNOS_PIN_BANK_EINTW(8, 0xC00, "gpx0", 0x00),
 	EXYNOS_PIN_BANK_EINTW(8, 0xC20, "gpx1", 0x04),
@@ -736,6 +758,7 @@ static const struct samsung_pin_bank_data exynos5420_pin_banks0[] __initconst =
 
 /* pin banks of exynos5420 pin-controller 1 */
 static const struct samsung_pin_bank_data exynos5420_pin_banks1[] __initconst = {
+	/* Must start with EINTG banks, ordered by EINT group number. */
 	EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpc0", 0x00),
 	EXYNOS_PIN_BANK_EINTG(8, 0x020, "gpc1", 0x04),
 	EXYNOS_PIN_BANK_EINTG(7, 0x040, "gpc2", 0x08),
@@ -753,6 +776,7 @@ static const struct samsung_pin_bank_data exynos5420_pin_banks1[] __initconst =
 
 /* pin banks of exynos5420 pin-controller 2 */
 static const struct samsung_pin_bank_data exynos5420_pin_banks2[] __initconst = {
+	/* Must start with EINTG banks, ordered by EINT group number. */
 	EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpe0", 0x00),
 	EXYNOS_PIN_BANK_EINTG(2, 0x020, "gpe1", 0x04),
 	EXYNOS_PIN_BANK_EINTG(6, 0x040, "gpf0", 0x08),
@@ -765,6 +789,7 @@ static const struct samsung_pin_bank_data exynos5420_pin_banks2[] __initconst =
 
 /* pin banks of exynos5420 pin-controller 3 */
 static const struct samsung_pin_bank_data exynos5420_pin_banks3[] __initconst = {
+	/* Must start with EINTG banks, ordered by EINT group number. */
 	EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpa0", 0x00),
 	EXYNOS_PIN_BANK_EINTG(6, 0x020, "gpa1", 0x04),
 	EXYNOS_PIN_BANK_EINTG(8, 0x040, "gpa2", 0x08),
@@ -778,6 +803,7 @@ static const struct samsung_pin_bank_data exynos5420_pin_banks3[] __initconst =
 
 /* pin banks of exynos5420 pin-controller 4 */
 static const struct samsung_pin_bank_data exynos5420_pin_banks4[] __initconst = {
+	/* Must start with EINTG banks, ordered by EINT group number. */
 	EXYNOS_PIN_BANK_EINTG(7, 0x000, "gpz", 0x00),
 };
 
diff --git a/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c b/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c
index 71c9d1d..b6e5642 100644
--- a/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c
+++ b/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c
@@ -45,6 +45,7 @@ static atomic_t exynos_shared_retention_refcnt;
 
 /* pin banks of exynos5433 pin-controller - ALIVE */
 static const struct samsung_pin_bank_data exynos5433_pin_banks0[] __initconst = {
+	/* Must start with EINTG banks, ordered by EINT group number. */
 	EXYNOS5433_PIN_BANK_EINTW(8, 0x000, "gpa0", 0x00),
 	EXYNOS5433_PIN_BANK_EINTW(8, 0x020, "gpa1", 0x04),
 	EXYNOS5433_PIN_BANK_EINTW(8, 0x040, "gpa2", 0x08),
@@ -58,27 +59,32 @@ static const struct samsung_pin_bank_data exynos5433_pin_banks0[] __initconst =
 
 /* pin banks of exynos5433 pin-controller - AUD */
 static const struct samsung_pin_bank_data exynos5433_pin_banks1[] __initconst = {
+	/* Must start with EINTG banks, ordered by EINT group number. */
 	EXYNOS5433_PIN_BANK_EINTG(7, 0x000, "gpz0", 0x00),
 	EXYNOS5433_PIN_BANK_EINTG(4, 0x020, "gpz1", 0x04),
 };
 
 /* pin banks of exynos5433 pin-controller - CPIF */
 static const struct samsung_pin_bank_data exynos5433_pin_banks2[] __initconst = {
+	/* Must start with EINTG banks, ordered by EINT group number. */
 	EXYNOS5433_PIN_BANK_EINTG(2, 0x000, "gpv6", 0x00),
 };
 
 /* pin banks of exynos5433 pin-controller - eSE */
 static const struct samsung_pin_bank_data exynos5433_pin_banks3[] __initconst = {
+	/* Must start with EINTG banks, ordered by EINT group number. */
 	EXYNOS5433_PIN_BANK_EINTG(3, 0x000, "gpj2", 0x00),
 };
 
 /* pin banks of exynos5433 pin-controller - FINGER */
 static const struct samsung_pin_bank_data exynos5433_pin_banks4[] __initconst = {
+	/* Must start with EINTG banks, ordered by EINT group number. */
 	EXYNOS5433_PIN_BANK_EINTG(4, 0x000, "gpd5", 0x00),
 };
 
 /* pin banks of exynos5433 pin-controller - FSYS */
 static const struct samsung_pin_bank_data exynos5433_pin_banks5[] __initconst = {
+	/* Must start with EINTG banks, ordered by EINT group number. */
 	EXYNOS5433_PIN_BANK_EINTG(6, 0x000, "gph1", 0x00),
 	EXYNOS5433_PIN_BANK_EINTG(7, 0x020, "gpr4", 0x04),
 	EXYNOS5433_PIN_BANK_EINTG(5, 0x040, "gpr0", 0x08),
@@ -89,16 +95,19 @@ static const struct samsung_pin_bank_data exynos5433_pin_banks5[] __initconst =
 
 /* pin banks of exynos5433 pin-controller - IMEM */
 static const struct samsung_pin_bank_data exynos5433_pin_banks6[] __initconst = {
+	/* Must start with EINTG banks, ordered by EINT group number. */
 	EXYNOS5433_PIN_BANK_EINTG(8, 0x000, "gpf0", 0x00),
 };
 
 /* pin banks of exynos5433 pin-controller - NFC */
 static const struct samsung_pin_bank_data exynos5433_pin_banks7[] __initconst = {
+	/* Must start with EINTG banks, ordered by EINT group number. */
 	EXYNOS5433_PIN_BANK_EINTG(3, 0x000, "gpj0", 0x00),
 };
 
 /* pin banks of exynos5433 pin-controller - PERIC */
 static const struct samsung_pin_bank_data exynos5433_pin_banks8[] __initconst = {
+	/* Must start with EINTG banks, ordered by EINT group number. */
 	EXYNOS5433_PIN_BANK_EINTG(6, 0x000, "gpv7", 0x00),
 	EXYNOS5433_PIN_BANK_EINTG(5, 0x020, "gpb0", 0x04),
 	EXYNOS5433_PIN_BANK_EINTG(8, 0x040, "gpc0", 0x08),
@@ -120,6 +129,7 @@ static const struct samsung_pin_bank_data exynos5433_pin_banks8[] __initconst =
 
 /* pin banks of exynos5433 pin-controller - TOUCH */
 static const struct samsung_pin_bank_data exynos5433_pin_banks9[] __initconst = {
+	/* Must start with EINTG banks, ordered by EINT group number. */
 	EXYNOS5433_PIN_BANK_EINTG(3, 0x000, "gpj1", 0x00),
 };
 
@@ -267,6 +277,7 @@ const struct samsung_pinctrl_of_match_data exynos5433_of_data __initconst = {
 
 /* pin banks of exynos7 pin-controller - ALIVE */
 static const struct samsung_pin_bank_data exynos7_pin_banks0[] __initconst = {
+	/* Must start with EINTG banks, ordered by EINT group number. */
 	EXYNOS_PIN_BANK_EINTW(8, 0x000, "gpa0", 0x00),
 	EXYNOS_PIN_BANK_EINTW(8, 0x020, "gpa1", 0x04),
 	EXYNOS_PIN_BANK_EINTW(8, 0x040, "gpa2", 0x08),
@@ -275,6 +286,7 @@ static const struct samsung_pin_bank_data exynos7_pin_banks0[] __initconst = {
 
 /* pin banks of exynos7 pin-controller - BUS0 */
 static const struct samsung_pin_bank_data exynos7_pin_banks1[] __initconst = {
+	/* Must start with EINTG banks, ordered by EINT group number. */
 	EXYNOS_PIN_BANK_EINTG(5, 0x000, "gpb0", 0x00),
 	EXYNOS_PIN_BANK_EINTG(8, 0x020, "gpc0", 0x04),
 	EXYNOS_PIN_BANK_EINTG(2, 0x040, "gpc1", 0x08),
@@ -294,31 +306,37 @@ static const struct samsung_pin_bank_data exynos7_pin_banks1[] __initconst = {
 
 /* pin banks of exynos7 pin-controller - NFC */
 static const struct samsung_pin_bank_data exynos7_pin_banks2[] __initconst = {
+	/* Must start with EINTG banks, ordered by EINT group number. */
 	EXYNOS_PIN_BANK_EINTG(3, 0x000, "gpj0", 0x00),
 };
 
 /* pin banks of exynos7 pin-controller - TOUCH */
 static const struct samsung_pin_bank_data exynos7_pin_banks3[] __initconst = {
+	/* Must start with EINTG banks, ordered by EINT group number. */
 	EXYNOS_PIN_BANK_EINTG(3, 0x000, "gpj1", 0x00),
 };
 
 /* pin banks of exynos7 pin-controller - FF */
 static const struct samsung_pin_bank_data exynos7_pin_banks4[] __initconst = {
+	/* Must start with EINTG banks, ordered by EINT group number. */
 	EXYNOS_PIN_BANK_EINTG(4, 0x000, "gpg4", 0x00),
 };
 
 /* pin banks of exynos7 pin-controller - ESE */
 static const struct samsung_pin_bank_data exynos7_pin_banks5[] __initconst = {
+	/* Must start with EINTG banks, ordered by EINT group number. */
 	EXYNOS_PIN_BANK_EINTG(5, 0x000, "gpv7", 0x00),
 };
 
 /* pin banks of exynos7 pin-controller - FSYS0 */
 static const struct samsung_pin_bank_data exynos7_pin_banks6[] __initconst = {
+	/* Must start with EINTG banks, ordered by EINT group number. */
 	EXYNOS_PIN_BANK_EINTG(7, 0x000, "gpr4", 0x00),
 };
 
 /* pin banks of exynos7 pin-controller - FSYS1 */
 static const struct samsung_pin_bank_data exynos7_pin_banks7[] __initconst = {
+	/* Must start with EINTG banks, ordered by EINT group number. */
 	EXYNOS_PIN_BANK_EINTG(4, 0x000, "gpr0", 0x00),
 	EXYNOS_PIN_BANK_EINTG(8, 0x020, "gpr1", 0x04),
 	EXYNOS_PIN_BANK_EINTG(5, 0x040, "gpr2", 0x08),
@@ -327,6 +345,7 @@ static const struct samsung_pin_bank_data exynos7_pin_banks7[] __initconst = {
 
 /* pin banks of exynos7 pin-controller - BUS1 */
 static const struct samsung_pin_bank_data exynos7_pin_banks8[] __initconst = {
+	/* Must start with EINTG banks, ordered by EINT group number. */
 	EXYNOS_PIN_BANK_EINTG(8, 0x020, "gpf0", 0x00),
 	EXYNOS_PIN_BANK_EINTG(8, 0x040, "gpf1", 0x04),
 	EXYNOS_PIN_BANK_EINTG(4, 0x060, "gpf2", 0x08),
@@ -340,6 +359,7 @@ static const struct samsung_pin_bank_data exynos7_pin_banks8[] __initconst = {
 };
 
 static const struct samsung_pin_bank_data exynos7_pin_banks9[] __initconst = {
+	/* Must start with EINTG banks, ordered by EINT group number. */
 	EXYNOS_PIN_BANK_EINTG(7, 0x000, "gpz0", 0x00),
 	EXYNOS_PIN_BANK_EINTG(4, 0x020, "gpz1", 0x04),
 };
-- 
2.7.4

^ permalink raw reply related	[flat|nested] 8+ messages in thread

* Re: [PATCH v2 2/2] pinctrl/samsung: Document required order of banks
  2018-04-16 15:52 ` [PATCH v2 2/2] pinctrl/samsung: Document required order of banks Paweł Chmiel
@ 2018-04-17  2:14   ` Tomasz Figa
  2018-04-18 15:47     ` Krzysztof Kozlowski
  0 siblings, 1 reply; 8+ messages in thread
From: Tomasz Figa @ 2018-04-17  2:14 UTC (permalink / raw)
  To: Paweł Chmiel
  Cc: Krzysztof Kozlowski, Sylwester Nawrocki, linus.walleij@linaro.org,
	Kukjin Kim, linux-arm-kernel,
	moderated list:SAMSUNG SOC CLOCK DRIVERS, linux-gpio,
	linux-kernel, stable

2018-04-17 0:52 GMT+09:00 Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>:
> This patch documents requirement coming from the way
> exynos_eint_gpio_irq() is working now, which expects
> EINTG banks to be at the beginning of the bank arrays.
>
> Cc: stable@vger.kernel.org

Probably no need for this one to go to stable, but either is fine for me.

> Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
> ---
>  drivers/pinctrl/samsung/pinctrl-exynos-arm.c   | 26 ++++++++++++++++++++++++++
>  drivers/pinctrl/samsung/pinctrl-exynos-arm64.c | 20 ++++++++++++++++++++
>  2 files changed, 46 insertions(+)

Reviewed-by: Tomasz Figa <tomasz.figa@gmail.com>

Thanks for the patch!

Best regards,
Tomasz

^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [PATCH v2 2/2] pinctrl/samsung: Document required order of banks
  2018-04-17  2:14   ` Tomasz Figa
@ 2018-04-18 15:47     ` Krzysztof Kozlowski
  0 siblings, 0 replies; 8+ messages in thread
From: Krzysztof Kozlowski @ 2018-04-18 15:47 UTC (permalink / raw)
  To: Paweł Chmiel
  Cc: Tomasz Figa, Sylwester Nawrocki, linus.walleij@linaro.org,
	Kukjin Kim, linux-arm-kernel,
	moderated list:SAMSUNG SOC CLOCK DRIVERS, linux-gpio,
	linux-kernel, stable

On Tue, Apr 17, 2018 at 4:14 AM, Tomasz Figa <tomasz.figa@gmail.com> wrote:
> 2018-04-17 0:52 GMT+09:00 Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>:
>> This patch documents requirement coming from the way
>> exynos_eint_gpio_irq() is working now, which expects
>> EINTG banks to be at the beginning of the bank arrays.
>>
>> Cc: stable@vger.kernel.org
>
> Probably no need for this one to go to stable, but either is fine for me.
>
>> Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
>> ---
>>  drivers/pinctrl/samsung/pinctrl-exynos-arm.c   | 26 ++++++++++++++++++++++++++
>>  drivers/pinctrl/samsung/pinctrl-exynos-arm64.c | 20 ++++++++++++++++++++
>>  2 files changed, 46 insertions(+)
>
> Reviewed-by: Tomasz Figa <tomasz.figa@gmail.com>

Thanks, applied without cc-stable.

Best regards,
Krzysztof

^ permalink raw reply	[flat|nested] 8+ messages in thread

end of thread, other threads:[~2018-04-26 23:04 UTC | newest]

Thread overview: 8+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2018-04-16 15:52 [PATCH v2 0/2] pinctrl/samsung: Fix incorrect EINTG banks order Paweł Chmiel
2018-04-16 15:52 ` [PATCH v2 1/2] pinctrl/samsung: Correct " Paweł Chmiel
2018-04-17  2:12   ` Tomasz Figa
2018-04-18 15:47     ` Krzysztof Kozlowski
2018-04-26 23:04       ` Linus Walleij
2018-04-16 15:52 ` [PATCH v2 2/2] pinctrl/samsung: Document required order of banks Paweł Chmiel
2018-04-17  2:14   ` Tomasz Figa
2018-04-18 15:47     ` Krzysztof Kozlowski

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).