[PATCH V3 0/2] pinctrl: imx: add imx8qxp pinctrl support

["A.s. Dong" <aisheng.dong@nxp.com>]

This patch series adds i.MX8QXP pinctrl support which is based on
the pad service provided by SCU firmware.

Note it depends on SCU APIs patch set which has already been merged by Shawn.
So suppose this patch series can go through shawn's tree.

Note the binding part is also merged into scu binding doc according to
Rob's suggestion.
https://www.spinics.net/lists/arm-kernel/msg680738.html

v2->v3:
 * Pad name update (add IMX8QXP prefix)

v1->v2:
 * scu firmware headfile path update
 * structure name and api usage update
 * move SCU Pad API implementation into driver
 * add binding headfile pad-imx8qxp.h

Dong Aisheng (2):
  pinctrl: fsl: add scu based pinctrl support
  pinctrl: imx: add imx8qxp driver

 drivers/pinctrl/freescale/Kconfig           |  11 +
 drivers/pinctrl/freescale/Makefile          |   2 +
 drivers/pinctrl/freescale/pinctrl-imx.c     | 425 ++++++++++------
 drivers/pinctrl/freescale/pinctrl-imx.h     |  67 ++-
 drivers/pinctrl/freescale/pinctrl-imx8qxp.c | 232 +++++++++
 drivers/pinctrl/freescale/pinctrl-scu.c     | 121 +++++
 include/dt-bindings/pinctrl/pads-imx8qxp.h  | 751 ++++++++++++++++++++++++++++
 7 files changed, 1439 insertions(+), 170 deletions(-)
 create mode 100644 drivers/pinctrl/freescale/pinctrl-imx8qxp.c
 create mode 100644 drivers/pinctrl/freescale/pinctrl-scu.c
 create mode 100644 include/dt-bindings/pinctrl/pads-imx8qxp.h

-- 
2.7.4