From: Rojhalat Ibrahim <imr@rtschenk.de>
To: "linux-gpio@vger.kernel.org" <linux-gpio@vger.kernel.org>,
netdev@vger.kernel.org
Cc: Linus Walleij <linus.walleij@linaro.org>,
Alexandre Courbot <acourbot@nvidia.com>,
David Miller <davem@davemloft.net>,
Florian Fainelli <f.fainelli@gmail.com>,
David Daney <david.daney@cavium.com>
Subject: [PATCH][v3] mdio-mux-gpio: Use GPIO descriptor interface and new gpiod_set_array function
Date: Tue, 25 Nov 2014 14:57:34 +0100 [thread overview]
Message-ID: <1581158.UhESICdgeM@pcimr> (raw)
Convert mdio-mux-gpio to the GPIO descriptor interface and use the new
gpiod_set_array function to set all output signals simultaneously.
Signed-off-by: Rojhalat Ibrahim <imr@rtschenk.de>
Acked-by: David S. Miller <davem@davemloft.net>
--
This patch depends on the gpiod_set_array function, which is available in
the linux-gpio devel tree.
Change log:
v3: remove unnecessary braces
v2: fix gpiod_get_index usage
drivers/net/phy/mdio-mux-gpio.c | 37 +++++++++++++------------------------
1 file changed, 13 insertions(+), 24 deletions(-)
diff --git a/drivers/net/phy/mdio-mux-gpio.c b/drivers/net/phy/mdio-mux-gpio.c
index 0966951..1eaf81e 100644
--- a/drivers/net/phy/mdio-mux-gpio.c
+++ b/drivers/net/phy/mdio-mux-gpio.c
@@ -14,13 +14,13 @@
#include <linux/mdio-mux.h>
#include <linux/of_gpio.h>
-#define DRV_VERSION "1.0"
+#define DRV_VERSION "1.1"
#define DRV_DESCRIPTION "GPIO controlled MDIO bus multiplexer driver"
#define MDIO_MUX_GPIO_MAX_BITS 8
struct mdio_mux_gpio_state {
- int gpio[MDIO_MUX_GPIO_MAX_BITS];
+ struct gpio_desc *gpio[MDIO_MUX_GPIO_MAX_BITS];
unsigned int num_gpios;
void *mux_handle;
};
@@ -28,29 +28,23 @@ struct mdio_mux_gpio_state {
static int mdio_mux_gpio_switch_fn(int current_child, int desired_child,
void *data)
{
- int change;
+ int values[MDIO_MUX_GPIO_MAX_BITS];
unsigned int n;
struct mdio_mux_gpio_state *s = data;
if (current_child == desired_child)
return 0;
- change = current_child == -1 ? -1 : current_child ^ desired_child;
-
for (n = 0; n < s->num_gpios; n++) {
- if (change & 1)
- gpio_set_value_cansleep(s->gpio[n],
- (desired_child & 1) != 0);
- change >>= 1;
- desired_child >>= 1;
+ values[n] = (desired_child >> n) & 1;
}
+ gpiod_set_array_cansleep(s->num_gpios, s->gpio, values);
return 0;
}
static int mdio_mux_gpio_probe(struct platform_device *pdev)
{
- enum of_gpio_flags f;
struct mdio_mux_gpio_state *s;
int num_gpios;
unsigned int n;
@@ -70,22 +64,14 @@ static int mdio_mux_gpio_probe(struct platform_device *pdev)
s->num_gpios = num_gpios;
for (n = 0; n < num_gpios; ) {
- int gpio = of_get_gpio_flags(pdev->dev.of_node, n, &f);
- if (gpio < 0) {
- r = (gpio == -ENODEV) ? -EPROBE_DEFER : gpio;
+ struct gpio_desc *gpio = gpiod_get_index(&pdev->dev, NULL, n,
+ GPIOD_OUT_LOW);
+ if (IS_ERR(gpio)) {
+ r = PTR_ERR(gpio);
goto err;
}
s->gpio[n] = gpio;
-
n++;
-
- r = gpio_request(gpio, "mdio_mux_gpio");
- if (r)
- goto err;
-
- r = gpio_direction_output(gpio, 0);
- if (r)
- goto err;
}
r = mdio_mux_init(&pdev->dev,
@@ -98,15 +84,18 @@ static int mdio_mux_gpio_probe(struct platform_device *pdev)
err:
while (n) {
n--;
- gpio_free(s->gpio[n]);
+ gpiod_put(s->gpio[n]);
}
return r;
}
static int mdio_mux_gpio_remove(struct platform_device *pdev)
{
+ unsigned int n;
struct mdio_mux_gpio_state *s = dev_get_platdata(&pdev->dev);
mdio_mux_uninit(s->mux_handle);
+ for (n = 0; n < s->num_gpios; n++)
+ gpiod_put(s->gpio[n]);
return 0;
}
--
2.0.4
next reply other threads:[~2014-11-25 13:57 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-25 13:57 Rojhalat Ibrahim [this message]
2014-11-28 4:30 ` [PATCH][v3] mdio-mux-gpio: Use GPIO descriptor interface and new gpiod_set_array function Alexandre Courbot
2014-11-28 15:56 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1581158.UhESICdgeM@pcimr \
--to=imr@rtschenk.de \
--cc=acourbot@nvidia.com \
--cc=davem@davemloft.net \
--cc=david.daney@cavium.com \
--cc=f.fainelli@gmail.com \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).