[PATCH V5 0/9] Support i.MX8 SoCs pinctrl drivers built as module

[Anson Huang <Anson.Huang@nxp.com>]

There are more and mroe requirements that SoC specific modules should be built
as module in order to support generic kernel image, such as Android GKI concept.

This patch series supports i.MX8 SoCs pinctrl drivers to be built as module,
including i.MX8MQ/MM/MN/MP/QXP/QM/DXL SoCs, and it also supports building
i.MX common pinctrl driver and i.MX SCU common pinctrl driver as module.

Compared to V4, the changes are as below:
	- remove unnecessary changes of replacing arch_initcall() with
	  module_platform_driver() in each SoC pinctrl driver, to make
	  sure no probe sequence change for built-in config.
	- add module author and description to each module.

Anson Huang (9):
  pinctrl: imx: Support building SCU pinctrl driver as module
  pinctrl: imx: Support building i.MX pinctrl driver as module
  pinctrl: imx8mm: Support building as module
  pinctrl: imx8mn: Support building as module
  pinctrl: imx8mq: Support building as module
  pinctrl: imx8mp: Support building as module
  pinctrl: imx8qxp: Support building as module
  pinctrl: imx8qm: Support building as module
  pinctrl: imx8dxl: Support building as module

 drivers/pinctrl/freescale/Kconfig           | 19 +++++-----
 drivers/pinctrl/freescale/pinctrl-imx.c     | 25 ++++++++-----
 drivers/pinctrl/freescale/pinctrl-imx.h     | 57 ++++++++++++-----------------
 drivers/pinctrl/freescale/pinctrl-imx8dxl.c |  8 ++++
 drivers/pinctrl/freescale/pinctrl-imx8mm.c  |  6 +++
 drivers/pinctrl/freescale/pinctrl-imx8mn.c  |  6 +++
 drivers/pinctrl/freescale/pinctrl-imx8mp.c  |  6 +++
 drivers/pinctrl/freescale/pinctrl-imx8mq.c  |  6 +++
 drivers/pinctrl/freescale/pinctrl-imx8qm.c  |  8 ++++
 drivers/pinctrl/freescale/pinctrl-imx8qxp.c |  8 ++++
 drivers/pinctrl/freescale/pinctrl-scu.c     |  9 +++++
 11 files changed, 106 insertions(+), 52 deletions(-)

-- 
2.7.4