From: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com>
To: Linus Walleij <linus.walleij@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Michal Simek <michal.simek@xilinx.com>,
"Greg Kroah-Hartman" <gregkh@linuxfoundation.org>
Cc: <linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-gpio@vger.kernel.org>, <git@xilinx.com>,
<saikrishna12468@gmail.com>,
Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com>
Subject: [PATCH 4/4] arm: dts: zynq: Replace 'io-standard' with 'power-source' property
Date: Wed, 21 Jul 2021 17:22:33 +0530 [thread overview]
Message-ID: <1626868353-96475-5-git-send-email-lakshmi.sai.krishna.potthuri@xilinx.com> (raw)
In-Reply-To: <1626868353-96475-1-git-send-email-lakshmi.sai.krishna.potthuri@xilinx.com>
Replace 'io-standard' property with 'power-source' property in all zynq dts
files to be in sync with Zynq pinctrl driver.
Signed-off-by: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com>
---
arch/arm/boot/dts/zynq-ebaz4205.dts | 8 ++++----
arch/arm/boot/dts/zynq-microzed.dts | 2 +-
arch/arm/boot/dts/zynq-zc702.dts | 20 ++++++++++----------
arch/arm/boot/dts/zynq-zc706.dts | 18 +++++++++---------
4 files changed, 24 insertions(+), 24 deletions(-)
diff --git a/arch/arm/boot/dts/zynq-ebaz4205.dts b/arch/arm/boot/dts/zynq-ebaz4205.dts
index b0b836aedd76..be7eae611fb7 100644
--- a/arch/arm/boot/dts/zynq-ebaz4205.dts
+++ b/arch/arm/boot/dts/zynq-ebaz4205.dts
@@ -57,7 +57,7 @@
conf {
groups = "gpio0_20_grp", "gpio0_32_grp";
- io-standard = <3>;
+ power-source = <3>;
slew-rate = <0>;
};
@@ -75,7 +75,7 @@
conf {
groups = "sdio0_2_grp";
- io-standard = <3>;
+ power-source = <3>;
slew-rate = <0>;
bias-disable;
};
@@ -87,7 +87,7 @@
conf-cd {
groups = "gpio0_34_grp";
- io-standard = <3>;
+ power-source = <3>;
slew-rate = <0>;
bias-high-impedance;
bias-pull-up;
@@ -102,7 +102,7 @@
conf {
groups = "uart1_4_grp";
- io-standard = <3>;
+ power-source = <3>;
slew-rate = <0>;
};
diff --git a/arch/arm/boot/dts/zynq-microzed.dts b/arch/arm/boot/dts/zynq-microzed.dts
index 6ed84fb15902..f44a4464943b 100644
--- a/arch/arm/boot/dts/zynq-microzed.dts
+++ b/arch/arm/boot/dts/zynq-microzed.dts
@@ -71,7 +71,7 @@
conf {
groups = "usb0_0_grp";
slew-rate = <0>;
- io-standard = <1>;
+ power-source = <1>;
};
conf-rx {
diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts
index cf70aff26c66..cf1e1cc3d132 100644
--- a/arch/arm/boot/dts/zynq-zc702.dts
+++ b/arch/arm/boot/dts/zynq-zc702.dts
@@ -206,7 +206,7 @@
conf {
groups = "can0_9_grp";
slew-rate = <0>;
- io-standard = <1>;
+ power-source = <1>;
};
conf-rx {
@@ -229,7 +229,7 @@
conf {
groups = "ethernet0_0_grp";
slew-rate = <0>;
- io-standard = <4>;
+ power-source = <4>;
};
conf-rx {
@@ -252,7 +252,7 @@
conf-mdio {
groups = "mdio0_0_grp";
slew-rate = <0>;
- io-standard = <1>;
+ power-source = <1>;
bias-disable;
};
};
@@ -270,7 +270,7 @@
"gpio0_10_grp", "gpio0_11_grp", "gpio0_12_grp",
"gpio0_13_grp", "gpio0_14_grp";
slew-rate = <0>;
- io-standard = <1>;
+ power-source = <1>;
};
conf-pull-up {
@@ -294,7 +294,7 @@
groups = "i2c0_10_grp";
bias-pull-up;
slew-rate = <0>;
- io-standard = <1>;
+ power-source = <1>;
};
};
@@ -307,7 +307,7 @@
conf {
groups = "sdio0_2_grp";
slew-rate = <0>;
- io-standard = <1>;
+ power-source = <1>;
bias-disable;
};
@@ -321,7 +321,7 @@
bias-high-impedance;
bias-pull-up;
slew-rate = <0>;
- io-standard = <1>;
+ power-source = <1>;
};
mux-wp {
@@ -334,7 +334,7 @@
bias-high-impedance;
bias-pull-up;
slew-rate = <0>;
- io-standard = <1>;
+ power-source = <1>;
};
};
@@ -347,7 +347,7 @@
conf {
groups = "uart1_10_grp";
slew-rate = <0>;
- io-standard = <1>;
+ power-source = <1>;
};
conf-rx {
@@ -370,7 +370,7 @@
conf {
groups = "usb0_0_grp";
slew-rate = <0>;
- io-standard = <1>;
+ power-source = <1>;
};
conf-rx {
diff --git a/arch/arm/boot/dts/zynq-zc706.dts b/arch/arm/boot/dts/zynq-zc706.dts
index 77943c16d33f..d21e3ae4ebb2 100644
--- a/arch/arm/boot/dts/zynq-zc706.dts
+++ b/arch/arm/boot/dts/zynq-zc706.dts
@@ -150,7 +150,7 @@
conf {
groups = "ethernet0_0_grp";
slew-rate = <0>;
- io-standard = <4>;
+ power-source = <4>;
};
conf-rx {
@@ -173,7 +173,7 @@
conf-mdio {
groups = "mdio0_0_grp";
slew-rate = <0>;
- io-standard = <1>;
+ power-source = <1>;
bias-disable;
};
};
@@ -187,7 +187,7 @@
conf {
groups = "gpio0_7_grp", "gpio0_46_grp", "gpio0_47_grp";
slew-rate = <0>;
- io-standard = <1>;
+ power-source = <1>;
};
conf-pull-up {
@@ -211,7 +211,7 @@
groups = "i2c0_10_grp";
bias-pull-up;
slew-rate = <0>;
- io-standard = <1>;
+ power-source = <1>;
};
};
@@ -224,7 +224,7 @@
conf {
groups = "sdio0_2_grp";
slew-rate = <0>;
- io-standard = <1>;
+ power-source = <1>;
bias-disable;
};
@@ -238,7 +238,7 @@
bias-high-impedance;
bias-pull-up;
slew-rate = <0>;
- io-standard = <1>;
+ power-source = <1>;
};
mux-wp {
@@ -251,7 +251,7 @@
bias-high-impedance;
bias-pull-up;
slew-rate = <0>;
- io-standard = <1>;
+ power-source = <1>;
};
};
@@ -264,7 +264,7 @@
conf {
groups = "uart1_10_grp";
slew-rate = <0>;
- io-standard = <1>;
+ power-source = <1>;
};
conf-rx {
@@ -287,7 +287,7 @@
conf {
groups = "usb0_0_grp";
slew-rate = <0>;
- io-standard = <1>;
+ power-source = <1>;
};
conf-rx {
--
2.17.1
next prev parent reply other threads:[~2021-07-21 12:02 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-21 11:52 [PATCH 0/4] pinctrl: pinctrl-zynq: yaml conversion and minor driver updates Sai Krishna Potthuri
2021-07-21 11:52 ` [PATCH 1/4] dt-bindings: pinctrl: pinctrl-zynq: Convert to yaml Sai Krishna Potthuri
2021-07-29 19:56 ` Rob Herring
2021-07-21 11:52 ` [PATCH 2/4] dt-bindings: pinctrl-zynq: Replace 'io-standard' with 'power-source' Sai Krishna Potthuri
2021-07-21 11:52 ` [PATCH 3/4] pinctrl: pinctrl-zynq: Add support for 'power-source' parameter Sai Krishna Potthuri
2021-07-21 11:52 ` Sai Krishna Potthuri [this message]
2021-07-29 19:59 ` [PATCH 4/4] arm: dts: zynq: Replace 'io-standard' with 'power-source' property Rob Herring
2021-07-30 4:59 ` Michal Simek
2021-08-02 17:29 ` Rob Herring
2021-08-05 7:52 ` Michal Simek
2021-08-16 9:08 ` Michal Simek
2021-07-30 12:43 ` Linus Walleij
2021-07-30 12:46 ` Michal Simek
2021-08-02 13:19 ` Linus Walleij
2021-08-02 17:21 ` Michal Simek
2021-07-30 12:41 ` [PATCH 0/4] pinctrl: pinctrl-zynq: yaml conversion and minor driver updates Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1626868353-96475-5-git-send-email-lakshmi.sai.krishna.potthuri@xilinx.com \
--to=lakshmi.sai.krishna.potthuri@xilinx.com \
--cc=devicetree@vger.kernel.org \
--cc=git@xilinx.com \
--cc=gregkh@linuxfoundation.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=michal.simek@xilinx.com \
--cc=robh+dt@kernel.org \
--cc=saikrishna12468@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).