* [PATCH 13/54] dt-bindings: gpio: Convert X-Powers AXP209 GPIO binding to a schema
[not found] <20210721140424.725744-1-maxime@cerno.tech>
@ 2021-07-21 14:03 ` Maxime Ripard
2021-07-22 2:09 ` Rob Herring
0 siblings, 1 reply; 3+ messages in thread
From: Maxime Ripard @ 2021-07-21 14:03 UTC (permalink / raw)
To: Chen-Yu Tsai, Maxime Ripard, Jernej Skrabec, devicetree,
Rob Herring, Frank Rowand
Cc: linux-arm-kernel, linux-sunxi, Bartosz Golaszewski, Linus Walleij,
linux-gpio
The X-Powers AXP PMICs feature a GPIO Controller supported by Linux
thanks to its device tree binding.
Now that we have the DT validation in place, let's convert the device
tree bindings for that driver over to a YAML schema.
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
.../devicetree/bindings/gpio/gpio-axp209.txt | 75 -----------------
.../bindings/gpio/x-powers,axp209-gpio.yaml | 84 +++++++++++++++++++
2 files changed, 84 insertions(+), 75 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/gpio/gpio-axp209.txt
create mode 100644 Documentation/devicetree/bindings/gpio/x-powers,axp209-gpio.yaml
diff --git a/Documentation/devicetree/bindings/gpio/gpio-axp209.txt b/Documentation/devicetree/bindings/gpio/gpio-axp209.txt
deleted file mode 100644
index fc42b2caa06d..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-axp209.txt
+++ /dev/null
@@ -1,75 +0,0 @@
-AXP209 GPIO & pinctrl controller
-
-This driver follows the usual GPIO bindings found in
-Documentation/devicetree/bindings/gpio/gpio.txt
-
-This driver follows the usual pinctrl bindings found in
-Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
-
-This driver employs the per-pin muxing pattern.
-
-Required properties:
-- compatible: Should be one of:
- - "x-powers,axp209-gpio"
- - "x-powers,axp813-gpio"
-- #gpio-cells: Should be two. The first cell is the pin number and the
- second is the GPIO flags.
-- gpio-controller: Marks the device node as a GPIO controller.
-
-This node must be a subnode of the axp20x PMIC, documented in
-Documentation/devicetree/bindings/mfd/axp20x.txt
-
-Example:
-
-axp209: pmic@34 {
- compatible = "x-powers,axp209";
- reg = <0x34>;
- interrupt-parent = <&nmi_intc>;
- interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
- interrupt-controller;
- #interrupt-cells = <1>;
-
- axp_gpio: gpio {
- compatible = "x-powers,axp209-gpio";
- gpio-controller;
- #gpio-cells = <2>;
- };
-};
-
-The GPIOs can be muxed to other functions and therefore, must be a subnode of
-axp_gpio.
-
-Example:
-
-&axp_gpio {
- gpio0_adc: gpio0-adc {
- pins = "GPIO0";
- function = "adc";
- };
-};
-
-&example_node {
- pinctrl-names = "default";
- pinctrl-0 = <&gpio0_adc>;
-};
-
-GPIOs and their functions
--------------------------
-
-Each GPIO is independent from the other (i.e. GPIO0 in gpio_in function does
-not force GPIO1 and GPIO2 to be in gpio_in function as well).
-
-axp209
-------
-GPIO | Functions
-------------------------
-GPIO0 | gpio_in, gpio_out, ldo, adc
-GPIO1 | gpio_in, gpio_out, ldo, adc
-GPIO2 | gpio_in, gpio_out
-
-axp813
-------
-GPIO | Functions
-------------------------
-GPIO0 | gpio_in, gpio_out, ldo, adc
-GPIO1 | gpio_in, gpio_out, ldo
diff --git a/Documentation/devicetree/bindings/gpio/x-powers,axp209-gpio.yaml b/Documentation/devicetree/bindings/gpio/x-powers,axp209-gpio.yaml
new file mode 100644
index 000000000000..28337f939d4e
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/x-powers,axp209-gpio.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/gpio/x-powers,axp209-gpio.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: X-Powers AXP209 GPIO Device Tree Bindings
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+
+properties:
+ "#gpio-cells":
+ const: 2
+ description: >
+ The first cell is the pin number and the second is the GPIO flags.
+
+ compatible:
+ oneOf:
+ - enum:
+ - x-powers,axp209-gpio
+ - x-powers,axp813-gpio
+ - items:
+ - const: x-powers,axp803-gpio
+ - const: x-powers,axp813-gpio
+
+ gpio-controller: true
+
+patternProperties:
+ "^.*-pins?$":
+ $ref: /schemas/pinctrl/pinmux-node.yaml#
+
+ properties:
+ pins:
+ items:
+ enum:
+ - GPIO0
+ - GPIO1
+ - GPIO2
+
+ function:
+ enum:
+ - adc
+ - ldo
+ - gpio_in
+ - gpio_out
+
+required:
+ - compatible
+ - "#gpio-cells"
+ - gpio-controller
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pmic@34 {
+ #interrupt-cells = <1>;
+ compatible = "x-powers,axp209";
+ reg = <0x34>;
+ interrupt-parent = <&nmi_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+
+ gpio {
+ #gpio-cells = <2>;
+ compatible = "x-powers,axp209-gpio";
+ gpio-controller;
+
+ gpio0-adc-pin {
+ pins = "GPIO0";
+ function = "adc";
+ };
+ };
+ };
+ };
+
+...
--
2.31.1
^ permalink raw reply related [flat|nested] 3+ messages in thread