Re: [PATCH v3 1/3] dt-bindings: pinctrl: mt8186: add pinctrl file and binding document

[Rob Herring <robh@kernel.org>]

On Thu, 10 Feb 2022 14:21:20 +0800, Guodong Liu wrote:
> 1. This patch adds pinctrl file for mt8186.
> 2. This patch adds mt8186 compatible node in binding document.
> 
> Signed-off-by: Guodong Liu <guodong.liu@mediatek.com>
> ---
>  .../bindings/pinctrl/pinctrl-mt8186.yaml      |  313 +++++
>  include/dt-bindings/pinctrl/mt8186-pinfunc.h  | 1174 +++++++++++++++++
>  2 files changed, 1487 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pinctrl/pinctrl-mt8186.yaml
>  create mode 100644 include/dt-bindings/pinctrl/mt8186-pinfunc.h
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8186.yaml: properties:reg-names: {'description': 'Gpio base register names.\n', 'items': [{'const': 'iocfg0'}, {'const': 'iocfg_bm'}, {'const': 'iocfg_bl'}, {'const': 'iocfg_br'}, {'const': 'iocfg_lm'}, {'const': 'iocfg_rb'}, {'const': 'iocfg_tl'}, {'const': 'eint'}], 'maxItems': 8} should not be valid under {'required': ['maxItems']}
	hint: "maxItems" is not needed with an "items" list
	from schema $id: http://devicetree.org/meta-schemas/items.yaml#
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8186.yaml: ignoring, error in schema: properties: reg-names
Documentation/devicetree/bindings/pinctrl/pinctrl-mt8186.example.dt.yaml:0:0: /example-0/pinctrl@10005000: failed to match any schema with compatible: ['mediatek,mt8186-pinctrl']

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/1590838

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.