[PATCH v5 0/4] pinctl: qcom: sm4450: Add SM4450 pinctrl driver

[PATCH v5 0/4] pinctl: qcom: sm4450: Add SM4450 pinctrl driver

[Tengfei Fan]

Add SM4450 pinctrl driver for support enable uart console.

Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
---
v4 -> v5:
  - Convert to platform remove callback returning void
  - correct incorrect address offset

v3 -> v4:
  - update gpio pins pattern

v2 -> v3:
  - update example pieces
  - update gpio pins pattern

v1 -> v2:
  - update right platform name
  - update gpio-reserved-ranges have right maxItems
  - update gpio-line-names have right maxItems
  - add min/maxItems for pins properties
  - redo dt_binding_check check
  - delete reserved gpios setting
  - combine separate pinctrl functions

previous discussion here:
[1] v4: https://lore.kernel.org/linux-arm-msm/20230920082102.5744-1-quic_tengfan@quicinc.com
[2] v3:	https://lore.kernel.org/linux-arm-msm/20230920064739.12562-1-quic_tengfan@quicinc.com
[3] v2:	https://lore.kernel.org/linux-arm-msm/20230915015808.18296-1-quic_tengfan@quicinc.com
[4] v1:	https://lore.kernel.org/linux-arm-msm/20230908063843.26835-1-quic_tengfan@quicinc.com

Tengfei Fan (4):
  dt-bindings: pinctrl: qcom: Add SM4450 pinctrl
  pinctrl: qcom: Add SM4450 pinctrl driver
  pinctrl: qcom: sm4450: Convert to platform remove callback returning
    void
  pinctrl: qcom: sm4450: correct incorrect address offset

 .../bindings/pinctrl/qcom,sm4450-tlmm.yaml    |  151 +++
 drivers/pinctrl/qcom/Kconfig.msm              |    8 +
 drivers/pinctrl/qcom/Makefile                 |    1 +
 drivers/pinctrl/qcom/pinctrl-sm4450.c         | 1013 +++++++++++++++++
 4 files changed, 1173 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sm4450-tlmm.yaml
 create mode 100644 drivers/pinctrl/qcom/pinctrl-sm4450.c


base-commit: 1f5c003694fab4b1ba6cbdcc417488b975c088d0
-- 
2.17.1

[PATCH v5 1/4] dt-bindings: pinctrl: qcom: Add SM4450 pinctrl

[Tengfei Fan]

Add device tree binding Documentation details for Qualcomm SM4450
TLMM device.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
---
 .../bindings/pinctrl/qcom,sm4450-tlmm.yaml    | 151 ++++++++++++++++++
 1 file changed, 151 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sm4450-tlmm.yaml

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm4450-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm4450-tlmm.yaml
new file mode 100644
index 000000000000..c49196681368
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm4450-tlmm.yaml
@@ -0,0 +1,151 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sm4450-tlmm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. SM4450 TLMM block
+
+maintainers:
+  - Tengfei Fan <quic_tengfan@quicinc.com>
+
+description:
+  Top Level Mode Multiplexer pin controller in Qualcomm SM4450 SoC.
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sm4450-pinctrl
+
+  reg:
+    maxItems: 1
+
+  interrupts: true
+  interrupt-controller: true
+  "#interrupt-cells": true
+  gpio-controller: true
+
+  gpio-reserved-ranges:
+    minItems: 1
+    maxItems: 68
+
+  gpio-line-names:
+    maxItems: 136
+
+  "#gpio-cells": true
+  gpio-ranges: true
+  wakeup-parent: true
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-sm4450-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-sm4450-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-sm4450-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-2][0-9]|13[0-5])$"
+            - enum: [ sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset ]
+          minItems: 1
+          maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+        enum: [ gpio, atest_char, atest_char0, atest_char1, atest_char2,
+                atest_char3, atest_usb0, atest_usb00, atest_usb01, atest_usb02,
+                atest_usb03, audio_ref, cam_mclk, cci_async, cci_i2c,
+                cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4,
+                cmu_rng0, cmu_rng1, cmu_rng2, cmu_rng3, coex_uart1, cri_trng,
+                cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1,
+                dp0_hot, gcc_gp1, gcc_gp2, gcc_gp3, host2wlan_sol, ibi_i3c,
+                jitter_bist, mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2,
+                mdp_vsync3, mi2s0_data0, mi2s0_data1, mi2s0_sck, mi2s0_ws,
+                mi2s2_data0, mi2s2_data1, mi2s2_sck, mi2s2_ws, mi2s_mclk0,
+                mi2s_mclk1, nav_gpio0, nav_gpio1, nav_gpio2, pcie0_clk,
+                phase_flag0, phase_flag1, phase_flag10, phase_flag11,
+                phase_flag12, phase_flag13, phase_flag14, phase_flag15,
+                phase_flag16, phase_flag17, phase_flag18, phase_flag19,
+                phase_flag2, phase_flag20, phase_flag21, phase_flag22,
+                phase_flag23, phase_flag24, phase_flag25, phase_flag26,
+                phase_flag27, phase_flag28, phase_flag29, phase_flag3,
+                phase_flag30, phase_flag31, phase_flag4, phase_flag5,
+                phase_flag6, phase_flag7, phase_flag8, phase_flag9,
+                pll_bist, pll_clk, prng_rosc0, prng_rosc1, prng_rosc2,
+                prng_rosc3, qdss_cti, qdss_gpio, qdss_gpio0, qdss_gpio1,
+                qdss_gpio10, qdss_gpio11, qdss_gpio12, qdss_gpio13, qdss_gpio14,
+                qdss_gpio15, qdss_gpio2, qdss_gpio3, qdss_gpio4, qdss_gpio5,
+                qdss_gpio6, qdss_gpio7, qdss_gpio8, qdss_gpio9, qlink0_enable,
+                qlink0_request, qlink0_wmss, qlink1_enable, qlink1_request,
+                qlink1_wmss, qlink2_enable, qlink2_request, qlink2_wmss,
+                qup0_se0, qup0_se1, qup0_se2, qup0_se3, qup0_se4, qup0_se5,
+                qup0_se6, qup0_se7, qup1_se0, qup1_se1, qup1_se2, qup1_se3,
+                qup1_se4, qup1_se5, qup1_se6, sd_write, tb_trig, tgu_ch0,
+                tgu_ch1, tgu_ch2, tgu_ch3, tmess_prng0, tmess_prng1,
+                tmess_prng2, tmess_prng3, tsense_pwm1, tsense_pwm2, uim0_clk,
+                uim0_data, uim0_present, uim0_reset, uim1_clk, uim1_data,
+                uim1_present, uim1_reset, usb0_hs, usb0_phy, vfr_0, vfr_1,
+                vsense_trigger ]
+
+        required:
+          - pins
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    tlmm: pinctrl@f100000 {
+      compatible = "qcom,sm4450-tlmm";
+      reg = <0x0f100000 0x300000>;
+      gpio-controller;
+      #gpio-cells = <2>;
+      gpio-ranges = <&tlmm 0 0 137>;
+      interrupt-controller;
+      #interrupt-cells = <2>;
+      interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+
+      gpio-wo-state {
+          pins = "gpio1";
+          function = "gpio";
+      };
+
+      uart-w-state {
+          rx-pins {
+              pins = "gpio23";
+              function = "qup1_se2";
+              bias-pull-up;
+          };
+
+          tx-pins {
+              pins = "gpio22";
+              function = "qup1_se2";
+              bias-disable;
+          };
+      };
+    };
+...
-- 
2.17.1

[PATCH v5 2/4] pinctrl: qcom: Add SM4450 pinctrl driver

[Tengfei Fan]

Add pinctrl driver for TLMM block found in SM4450 SoC.

Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
---
 drivers/pinctrl/qcom/Kconfig.msm      |    8 +
 drivers/pinctrl/qcom/Makefile         |    1 +
 drivers/pinctrl/qcom/pinctrl-sm4450.c | 1013 +++++++++++++++++++++++++
 3 files changed, 1022 insertions(+)
 create mode 100644 drivers/pinctrl/qcom/pinctrl-sm4450.c

diff --git a/drivers/pinctrl/qcom/Kconfig.msm b/drivers/pinctrl/qcom/Kconfig.msm
index 87b6b70cfcd5..8fe459d082ed 100644
--- a/drivers/pinctrl/qcom/Kconfig.msm
+++ b/drivers/pinctrl/qcom/Kconfig.msm
@@ -286,6 +286,14 @@ config PINCTRL_SDX75
          Qualcomm Technologies Inc TLMM block found on the Qualcomm
          Technologies Inc SDX75 platform.
 
+config PINCTRL_SM4450
+	tristate "Qualcomm Technologies Inc SM4450 pin controller driver"
+	depends on ARM64 || COMPILE_TEST
+	help
+	 This is the pinctrl, pinmux, pinconf and gpiolib driver for the
+	 Qualcomm Technologies Inc TLMM block found on the Qualcomm
+	 Technologies Inc SM4450 platform.
+
 config PINCTRL_SM6115
 	tristate "Qualcomm Technologies Inc SM6115,SM4250 pin controller driver"
 	depends on ARM64 || COMPILE_TEST
diff --git a/drivers/pinctrl/qcom/Makefile b/drivers/pinctrl/qcom/Makefile
index fda23a83cb74..e2e76071d268 100644
--- a/drivers/pinctrl/qcom/Makefile
+++ b/drivers/pinctrl/qcom/Makefile
@@ -43,6 +43,7 @@ obj-$(CONFIG_PINCTRL_SDM845) += pinctrl-sdm845.o
 obj-$(CONFIG_PINCTRL_SDX55) += pinctrl-sdx55.o
 obj-$(CONFIG_PINCTRL_SDX65) += pinctrl-sdx65.o
 obj-$(CONFIG_PINCTRL_SDX75) += pinctrl-sdx75.o
+obj-$(CONFIG_PINCTRL_SM4450) += pinctrl-sm4450.o
 obj-$(CONFIG_PINCTRL_SM6115) += pinctrl-sm6115.o
 obj-$(CONFIG_PINCTRL_SM6115_LPASS_LPI) += pinctrl-sm6115-lpass-lpi.o
 obj-$(CONFIG_PINCTRL_SM6125) += pinctrl-sm6125.o
diff --git a/drivers/pinctrl/qcom/pinctrl-sm4450.c b/drivers/pinctrl/qcom/pinctrl-sm4450.c
new file mode 100644
index 000000000000..20ad639087ed
--- /dev/null
+++ b/drivers/pinctrl/qcom/pinctrl-sm4450.c
@@ -0,0 +1,1013 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+#include "pinctrl-msm.h"
+
+#define REG_SIZE 0x1000
+
+#define PINGROUP(id, f1, f2, f3, f4, f5, f6, f7, f8, f9)	\
+	{					        \
+		.grp = PINCTRL_PINGROUP("gpio" #id,     \
+			gpio##id##_pins,                \
+			ARRAY_SIZE(gpio##id##_pins)),   \
+		.funcs = (int[]){			\
+			msm_mux_gpio, /* gpio mode */	\
+			msm_mux_##f1,			\
+			msm_mux_##f2,			\
+			msm_mux_##f3,			\
+			msm_mux_##f4,			\
+			msm_mux_##f5,			\
+			msm_mux_##f6,			\
+			msm_mux_##f7,			\
+			msm_mux_##f8,			\
+			msm_mux_##f9			\
+		},				        \
+		.nfuncs = 10,				\
+		.ctl_reg = REG_SIZE * id,			\
+		.io_reg = 0x4 + REG_SIZE * id,		\
+		.intr_cfg_reg = 0x8 + REG_SIZE * id,		\
+		.intr_status_reg = 0xc + REG_SIZE * id,	\
+		.intr_target_reg = 0x8 + REG_SIZE * id,	\
+		.mux_bit = 2,			\
+		.pull_bit = 0,			\
+		.drv_bit = 6,			\
+		.egpio_enable = 12,		\
+		.egpio_present = 11,		\
+		.oe_bit = 9,			\
+		.in_bit = 0,			\
+		.out_bit = 1,			\
+		.intr_enable_bit = 0,		\
+		.intr_status_bit = 0,		\
+		.intr_target_bit = 5,		\
+		.intr_target_kpss_val = 3,	\
+		.intr_raw_status_bit = 4,	\
+		.intr_polarity_bit = 1,		\
+		.intr_detection_bit = 2,	\
+		.intr_detection_width = 2,	\
+	}
+
+#define SDC_QDSD_PINGROUP(pg_name, ctl, pull, drv)	\
+	{					        \
+		.grp = PINCTRL_PINGROUP(#pg_name,       \
+			pg_name##_pins,                 \
+			ARRAY_SIZE(pg_name##_pins)),    \
+		.ctl_reg = ctl,				\
+		.io_reg = 0,				\
+		.intr_cfg_reg = 0,			\
+		.intr_status_reg = 0,			\
+		.intr_target_reg = 0,			\
+		.mux_bit = -1,				\
+		.pull_bit = pull,			\
+		.drv_bit = drv,				\
+		.oe_bit = -1,				\
+		.in_bit = -1,				\
+		.out_bit = -1,				\
+		.intr_enable_bit = -1,			\
+		.intr_status_bit = -1,			\
+		.intr_target_bit = -1,			\
+		.intr_raw_status_bit = -1,		\
+		.intr_polarity_bit = -1,		\
+		.intr_detection_bit = -1,		\
+		.intr_detection_width = -1,		\
+	}
+
+#define UFS_RESET(pg_name, offset)				\
+	{					        \
+		.grp = PINCTRL_PINGROUP(#pg_name,       \
+			pg_name##_pins,                 \
+			ARRAY_SIZE(pg_name##_pins)),    \
+		.ctl_reg = offset,			\
+		.io_reg = offset + 0x4,			\
+		.intr_cfg_reg = 0,			\
+		.intr_status_reg = 0,			\
+		.intr_target_reg = 0,			\
+		.mux_bit = -1,				\
+		.pull_bit = 3,				\
+		.drv_bit = 0,				\
+		.oe_bit = -1,				\
+		.in_bit = -1,				\
+		.out_bit = 0,				\
+		.intr_enable_bit = -1,			\
+		.intr_status_bit = -1,			\
+		.intr_target_bit = -1,			\
+		.intr_raw_status_bit = -1,		\
+		.intr_polarity_bit = -1,		\
+		.intr_detection_bit = -1,		\
+		.intr_detection_width = -1,		\
+	}
+
+#define QUP_I3C(qup_mode, qup_offset)			\
+	{						\
+		.mode = qup_mode,			\
+		.offset = qup_offset,			\
+	}
+
+
+static const struct pinctrl_pin_desc sm4450_pins[] = {
+	PINCTRL_PIN(0, "GPIO_0"),
+	PINCTRL_PIN(1, "GPIO_1"),
+	PINCTRL_PIN(2, "GPIO_2"),
+	PINCTRL_PIN(3, "GPIO_3"),
+	PINCTRL_PIN(4, "GPIO_4"),
+	PINCTRL_PIN(5, "GPIO_5"),
+	PINCTRL_PIN(6, "GPIO_6"),
+	PINCTRL_PIN(7, "GPIO_7"),
+	PINCTRL_PIN(8, "GPIO_8"),
+	PINCTRL_PIN(9, "GPIO_9"),
+	PINCTRL_PIN(10, "GPIO_10"),
+	PINCTRL_PIN(11, "GPIO_11"),
+	PINCTRL_PIN(12, "GPIO_12"),
+	PINCTRL_PIN(13, "GPIO_13"),
+	PINCTRL_PIN(14, "GPIO_14"),
+	PINCTRL_PIN(15, "GPIO_15"),
+	PINCTRL_PIN(16, "GPIO_16"),
+	PINCTRL_PIN(17, "GPIO_17"),
+	PINCTRL_PIN(18, "GPIO_18"),
+	PINCTRL_PIN(19, "GPIO_19"),
+	PINCTRL_PIN(20, "GPIO_20"),
+	PINCTRL_PIN(21, "GPIO_21"),
+	PINCTRL_PIN(22, "GPIO_22"),
+	PINCTRL_PIN(23, "GPIO_23"),
+	PINCTRL_PIN(24, "GPIO_24"),
+	PINCTRL_PIN(25, "GPIO_25"),
+	PINCTRL_PIN(26, "GPIO_26"),
+	PINCTRL_PIN(27, "GPIO_27"),
+	PINCTRL_PIN(28, "GPIO_28"),
+	PINCTRL_PIN(29, "GPIO_29"),
+	PINCTRL_PIN(30, "GPIO_30"),
+	PINCTRL_PIN(31, "GPIO_31"),
+	PINCTRL_PIN(32, "GPIO_32"),
+	PINCTRL_PIN(33, "GPIO_33"),
+	PINCTRL_PIN(34, "GPIO_34"),
+	PINCTRL_PIN(35, "GPIO_35"),
+	PINCTRL_PIN(36, "GPIO_36"),
+	PINCTRL_PIN(37, "GPIO_37"),
+	PINCTRL_PIN(38, "GPIO_38"),
+	PINCTRL_PIN(39, "GPIO_39"),
+	PINCTRL_PIN(40, "GPIO_40"),
+	PINCTRL_PIN(41, "GPIO_41"),
+	PINCTRL_PIN(42, "GPIO_42"),
+	PINCTRL_PIN(43, "GPIO_43"),
+	PINCTRL_PIN(44, "GPIO_44"),
+	PINCTRL_PIN(45, "GPIO_45"),
+	PINCTRL_PIN(46, "GPIO_46"),
+	PINCTRL_PIN(47, "GPIO_47"),
+	PINCTRL_PIN(48, "GPIO_48"),
+	PINCTRL_PIN(49, "GPIO_49"),
+	PINCTRL_PIN(50, "GPIO_50"),
+	PINCTRL_PIN(51, "GPIO_51"),
+	PINCTRL_PIN(52, "GPIO_52"),
+	PINCTRL_PIN(53, "GPIO_53"),
+	PINCTRL_PIN(54, "GPIO_54"),
+	PINCTRL_PIN(55, "GPIO_55"),
+	PINCTRL_PIN(56, "GPIO_56"),
+	PINCTRL_PIN(57, "GPIO_57"),
+	PINCTRL_PIN(58, "GPIO_58"),
+	PINCTRL_PIN(59, "GPIO_59"),
+	PINCTRL_PIN(60, "GPIO_60"),
+	PINCTRL_PIN(61, "GPIO_61"),
+	PINCTRL_PIN(62, "GPIO_62"),
+	PINCTRL_PIN(63, "GPIO_63"),
+	PINCTRL_PIN(64, "GPIO_64"),
+	PINCTRL_PIN(65, "GPIO_65"),
+	PINCTRL_PIN(66, "GPIO_66"),
+	PINCTRL_PIN(67, "GPIO_67"),
+	PINCTRL_PIN(68, "GPIO_68"),
+	PINCTRL_PIN(69, "GPIO_69"),
+	PINCTRL_PIN(70, "GPIO_70"),
+	PINCTRL_PIN(71, "GPIO_71"),
+	PINCTRL_PIN(72, "GPIO_72"),
+	PINCTRL_PIN(73, "GPIO_73"),
+	PINCTRL_PIN(74, "GPIO_74"),
+	PINCTRL_PIN(75, "GPIO_75"),
+	PINCTRL_PIN(76, "GPIO_76"),
+	PINCTRL_PIN(77, "GPIO_77"),
+	PINCTRL_PIN(78, "GPIO_78"),
+	PINCTRL_PIN(79, "GPIO_79"),
+	PINCTRL_PIN(80, "GPIO_80"),
+	PINCTRL_PIN(81, "GPIO_81"),
+	PINCTRL_PIN(82, "GPIO_82"),
+	PINCTRL_PIN(83, "GPIO_83"),
+	PINCTRL_PIN(84, "GPIO_84"),
+	PINCTRL_PIN(85, "GPIO_85"),
+	PINCTRL_PIN(86, "GPIO_86"),
+	PINCTRL_PIN(87, "GPIO_87"),
+	PINCTRL_PIN(88, "GPIO_88"),
+	PINCTRL_PIN(89, "GPIO_89"),
+	PINCTRL_PIN(90, "GPIO_90"),
+	PINCTRL_PIN(91, "GPIO_91"),
+	PINCTRL_PIN(92, "GPIO_92"),
+	PINCTRL_PIN(93, "GPIO_93"),
+	PINCTRL_PIN(94, "GPIO_94"),
+	PINCTRL_PIN(95, "GPIO_95"),
+	PINCTRL_PIN(96, "GPIO_96"),
+	PINCTRL_PIN(97, "GPIO_97"),
+	PINCTRL_PIN(98, "GPIO_98"),
+	PINCTRL_PIN(99, "GPIO_99"),
+	PINCTRL_PIN(100, "GPIO_100"),
+	PINCTRL_PIN(101, "GPIO_101"),
+	PINCTRL_PIN(102, "GPIO_102"),
+	PINCTRL_PIN(103, "GPIO_103"),
+	PINCTRL_PIN(104, "GPIO_104"),
+	PINCTRL_PIN(105, "GPIO_105"),
+	PINCTRL_PIN(106, "GPIO_106"),
+	PINCTRL_PIN(107, "GPIO_107"),
+	PINCTRL_PIN(108, "GPIO_108"),
+	PINCTRL_PIN(109, "GPIO_109"),
+	PINCTRL_PIN(110, "GPIO_110"),
+	PINCTRL_PIN(111, "GPIO_111"),
+	PINCTRL_PIN(112, "GPIO_112"),
+	PINCTRL_PIN(113, "GPIO_113"),
+	PINCTRL_PIN(114, "GPIO_114"),
+	PINCTRL_PIN(115, "GPIO_115"),
+	PINCTRL_PIN(116, "GPIO_116"),
+	PINCTRL_PIN(117, "GPIO_117"),
+	PINCTRL_PIN(118, "GPIO_118"),
+	PINCTRL_PIN(119, "GPIO_119"),
+	PINCTRL_PIN(120, "GPIO_120"),
+	PINCTRL_PIN(121, "GPIO_121"),
+	PINCTRL_PIN(122, "GPIO_122"),
+	PINCTRL_PIN(123, "GPIO_123"),
+	PINCTRL_PIN(124, "GPIO_124"),
+	PINCTRL_PIN(125, "GPIO_125"),
+	PINCTRL_PIN(126, "GPIO_126"),
+	PINCTRL_PIN(127, "GPIO_127"),
+	PINCTRL_PIN(128, "GPIO_128"),
+	PINCTRL_PIN(129, "GPIO_129"),
+	PINCTRL_PIN(130, "GPIO_130"),
+	PINCTRL_PIN(131, "GPIO_131"),
+	PINCTRL_PIN(132, "GPIO_132"),
+	PINCTRL_PIN(133, "GPIO_133"),
+	PINCTRL_PIN(134, "GPIO_134"),
+	PINCTRL_PIN(135, "GPIO_135"),
+	PINCTRL_PIN(136, "UFS_RESET"),
+	PINCTRL_PIN(137, "SDC1_RCLK"),
+	PINCTRL_PIN(138, "SDC1_CLK"),
+	PINCTRL_PIN(139, "SDC1_CMD"),
+	PINCTRL_PIN(140, "SDC1_DATA"),
+	PINCTRL_PIN(141, "SDC2_CLK"),
+	PINCTRL_PIN(142, "SDC2_CMD"),
+	PINCTRL_PIN(143, "SDC2_DATA"),
+};
+
+#define DECLARE_MSM_GPIO_PINS(pin) \
+	static const unsigned int gpio##pin##_pins[] = { pin }
+DECLARE_MSM_GPIO_PINS(0);
+DECLARE_MSM_GPIO_PINS(1);
+DECLARE_MSM_GPIO_PINS(2);
+DECLARE_MSM_GPIO_PINS(3);
+DECLARE_MSM_GPIO_PINS(4);
+DECLARE_MSM_GPIO_PINS(5);
+DECLARE_MSM_GPIO_PINS(6);
+DECLARE_MSM_GPIO_PINS(7);
+DECLARE_MSM_GPIO_PINS(8);
+DECLARE_MSM_GPIO_PINS(9);
+DECLARE_MSM_GPIO_PINS(10);
+DECLARE_MSM_GPIO_PINS(11);
+DECLARE_MSM_GPIO_PINS(12);
+DECLARE_MSM_GPIO_PINS(13);
+DECLARE_MSM_GPIO_PINS(14);
+DECLARE_MSM_GPIO_PINS(15);
+DECLARE_MSM_GPIO_PINS(16);
+DECLARE_MSM_GPIO_PINS(17);
+DECLARE_MSM_GPIO_PINS(18);
+DECLARE_MSM_GPIO_PINS(19);
+DECLARE_MSM_GPIO_PINS(20);
+DECLARE_MSM_GPIO_PINS(21);
+DECLARE_MSM_GPIO_PINS(22);
+DECLARE_MSM_GPIO_PINS(23);
+DECLARE_MSM_GPIO_PINS(24);
+DECLARE_MSM_GPIO_PINS(25);
+DECLARE_MSM_GPIO_PINS(26);
+DECLARE_MSM_GPIO_PINS(27);
+DECLARE_MSM_GPIO_PINS(28);
+DECLARE_MSM_GPIO_PINS(29);
+DECLARE_MSM_GPIO_PINS(30);
+DECLARE_MSM_GPIO_PINS(31);
+DECLARE_MSM_GPIO_PINS(32);
+DECLARE_MSM_GPIO_PINS(33);
+DECLARE_MSM_GPIO_PINS(34);
+DECLARE_MSM_GPIO_PINS(35);
+DECLARE_MSM_GPIO_PINS(36);
+DECLARE_MSM_GPIO_PINS(37);
+DECLARE_MSM_GPIO_PINS(38);
+DECLARE_MSM_GPIO_PINS(39);
+DECLARE_MSM_GPIO_PINS(40);
+DECLARE_MSM_GPIO_PINS(41);
+DECLARE_MSM_GPIO_PINS(42);
+DECLARE_MSM_GPIO_PINS(43);
+DECLARE_MSM_GPIO_PINS(44);
+DECLARE_MSM_GPIO_PINS(45);
+DECLARE_MSM_GPIO_PINS(46);
+DECLARE_MSM_GPIO_PINS(47);
+DECLARE_MSM_GPIO_PINS(48);
+DECLARE_MSM_GPIO_PINS(49);
+DECLARE_MSM_GPIO_PINS(50);
+DECLARE_MSM_GPIO_PINS(51);
+DECLARE_MSM_GPIO_PINS(52);
+DECLARE_MSM_GPIO_PINS(53);
+DECLARE_MSM_GPIO_PINS(54);
+DECLARE_MSM_GPIO_PINS(55);
+DECLARE_MSM_GPIO_PINS(56);
+DECLARE_MSM_GPIO_PINS(57);
+DECLARE_MSM_GPIO_PINS(58);
+DECLARE_MSM_GPIO_PINS(59);
+DECLARE_MSM_GPIO_PINS(60);
+DECLARE_MSM_GPIO_PINS(61);
+DECLARE_MSM_GPIO_PINS(62);
+DECLARE_MSM_GPIO_PINS(63);
+DECLARE_MSM_GPIO_PINS(64);
+DECLARE_MSM_GPIO_PINS(65);
+DECLARE_MSM_GPIO_PINS(66);
+DECLARE_MSM_GPIO_PINS(67);
+DECLARE_MSM_GPIO_PINS(68);
+DECLARE_MSM_GPIO_PINS(69);
+DECLARE_MSM_GPIO_PINS(70);
+DECLARE_MSM_GPIO_PINS(71);
+DECLARE_MSM_GPIO_PINS(72);
+DECLARE_MSM_GPIO_PINS(73);
+DECLARE_MSM_GPIO_PINS(74);
+DECLARE_MSM_GPIO_PINS(75);
+DECLARE_MSM_GPIO_PINS(76);
+DECLARE_MSM_GPIO_PINS(77);
+DECLARE_MSM_GPIO_PINS(78);
+DECLARE_MSM_GPIO_PINS(79);
+DECLARE_MSM_GPIO_PINS(80);
+DECLARE_MSM_GPIO_PINS(81);
+DECLARE_MSM_GPIO_PINS(82);
+DECLARE_MSM_GPIO_PINS(83);
+DECLARE_MSM_GPIO_PINS(84);
+DECLARE_MSM_GPIO_PINS(85);
+DECLARE_MSM_GPIO_PINS(86);
+DECLARE_MSM_GPIO_PINS(87);
+DECLARE_MSM_GPIO_PINS(88);
+DECLARE_MSM_GPIO_PINS(89);
+DECLARE_MSM_GPIO_PINS(90);
+DECLARE_MSM_GPIO_PINS(91);
+DECLARE_MSM_GPIO_PINS(92);
+DECLARE_MSM_GPIO_PINS(93);
+DECLARE_MSM_GPIO_PINS(94);
+DECLARE_MSM_GPIO_PINS(95);
+DECLARE_MSM_GPIO_PINS(96);
+DECLARE_MSM_GPIO_PINS(97);
+DECLARE_MSM_GPIO_PINS(98);
+DECLARE_MSM_GPIO_PINS(99);
+DECLARE_MSM_GPIO_PINS(100);
+DECLARE_MSM_GPIO_PINS(101);
+DECLARE_MSM_GPIO_PINS(102);
+DECLARE_MSM_GPIO_PINS(103);
+DECLARE_MSM_GPIO_PINS(104);
+DECLARE_MSM_GPIO_PINS(105);
+DECLARE_MSM_GPIO_PINS(106);
+DECLARE_MSM_GPIO_PINS(107);
+DECLARE_MSM_GPIO_PINS(108);
+DECLARE_MSM_GPIO_PINS(109);
+DECLARE_MSM_GPIO_PINS(110);
+DECLARE_MSM_GPIO_PINS(111);
+DECLARE_MSM_GPIO_PINS(112);
+DECLARE_MSM_GPIO_PINS(113);
+DECLARE_MSM_GPIO_PINS(114);
+DECLARE_MSM_GPIO_PINS(115);
+DECLARE_MSM_GPIO_PINS(116);
+DECLARE_MSM_GPIO_PINS(117);
+DECLARE_MSM_GPIO_PINS(118);
+DECLARE_MSM_GPIO_PINS(119);
+DECLARE_MSM_GPIO_PINS(120);
+DECLARE_MSM_GPIO_PINS(121);
+DECLARE_MSM_GPIO_PINS(122);
+DECLARE_MSM_GPIO_PINS(123);
+DECLARE_MSM_GPIO_PINS(124);
+DECLARE_MSM_GPIO_PINS(125);
+DECLARE_MSM_GPIO_PINS(126);
+DECLARE_MSM_GPIO_PINS(127);
+DECLARE_MSM_GPIO_PINS(128);
+DECLARE_MSM_GPIO_PINS(129);
+DECLARE_MSM_GPIO_PINS(130);
+DECLARE_MSM_GPIO_PINS(131);
+DECLARE_MSM_GPIO_PINS(132);
+DECLARE_MSM_GPIO_PINS(133);
+DECLARE_MSM_GPIO_PINS(134);
+DECLARE_MSM_GPIO_PINS(135);
+
+static const unsigned int ufs_reset_pins[] = { 136 };
+static const unsigned int sdc1_rclk_pins[] = { 137 };
+static const unsigned int sdc1_clk_pins[] = { 138 };
+static const unsigned int sdc1_cmd_pins[] = { 139 };
+static const unsigned int sdc1_data_pins[] = { 140 };
+static const unsigned int sdc2_clk_pins[] = { 141 };
+static const unsigned int sdc2_cmd_pins[] = { 142 };
+static const unsigned int sdc2_data_pins[] = { 143 };
+
+enum sm4450_functions {
+	msm_mux_gpio,
+	msm_mux_atest_char,
+	msm_mux_atest_usb0,
+	msm_mux_audio_ref_clk,
+	msm_mux_cam_mclk,
+	msm_mux_cci_async_in0,
+	msm_mux_cci_i2c,
+	msm_mux_cci,
+	msm_mux_cmu_rng,
+	msm_mux_coex_uart1_rx,
+	msm_mux_coex_uart1_tx,
+	msm_mux_cri_trng,
+	msm_mux_dbg_out_clk,
+	msm_mux_ddr_bist,
+	msm_mux_ddr_pxi0_test,
+	msm_mux_ddr_pxi1_test,
+	msm_mux_gcc_gp1_clk,
+	msm_mux_gcc_gp2_clk,
+	msm_mux_gcc_gp3_clk,
+	msm_mux_host2wlan_sol,
+	msm_mux_ibi_i3c_qup0,
+	msm_mux_ibi_i3c_qup1,
+	msm_mux_jitter_bist_ref,
+	msm_mux_mdp_vsync0_out,
+	msm_mux_mdp_vsync1_out,
+	msm_mux_mdp_vsync2_out,
+	msm_mux_mdp_vsync3_out,
+	msm_mux_mdp_vsync,
+	msm_mux_nav,
+	msm_mux_pcie0_clk_req,
+	msm_mux_phase_flag,
+	msm_mux_pll_bist_sync,
+	msm_mux_pll_clk_aux,
+	msm_mux_prng_rosc,
+	msm_mux_qdss_cti_trig0,
+	msm_mux_qdss_cti_trig1,
+	msm_mux_qdss_gpio,
+	msm_mux_qlink0_enable,
+	msm_mux_qlink0_request,
+	msm_mux_qlink0_wmss_reset,
+	msm_mux_qup0_se0,
+	msm_mux_qup0_se1,
+	msm_mux_qup0_se2,
+	msm_mux_qup0_se3,
+	msm_mux_qup0_se4,
+	msm_mux_qup1_se0,
+	msm_mux_qup1_se1,
+	msm_mux_qup1_se2,
+	msm_mux_qup1_se3,
+	msm_mux_qup1_se4,
+	msm_mux_sd_write_protect,
+	msm_mux_tb_trig_sdc1,
+	msm_mux_tb_trig_sdc2,
+	msm_mux_tgu_ch0_trigout,
+	msm_mux_tgu_ch1_trigout,
+	msm_mux_tgu_ch2_trigout,
+	msm_mux_tgu_ch3_trigout,
+	msm_mux_tmess_prng,
+	msm_mux_tsense_pwm1_out,
+	msm_mux_tsense_pwm2_out,
+	msm_mux_uim0,
+	msm_mux_uim1,
+	msm_mux_usb0_hs_ac,
+	msm_mux_usb0_phy_ps,
+	msm_mux_vfr_0_mira,
+	msm_mux_vfr_0_mirb,
+	msm_mux_vfr_1,
+	msm_mux_vsense_trigger_mirnat,
+	msm_mux_wlan1_adc_dtest0,
+	msm_mux_wlan1_adc_dtest1,
+	msm_mux__,
+};
+
+static const char * const gpio_groups[] = {
+	"gpio0", "gpio1", "gpio2", "gpio3", "gpio4", "gpio5", "gpio6", "gpio7",
+	"gpio8", "gpio9", "gpio10", "gpio11", "gpio12", "gpio13", "gpio14",
+	"gpio15", "gpio16", "gpio17", "gpio18", "gpio19", "gpio20", "gpio21",
+	"gpio22", "gpio23", "gpio24", "gpio25", "gpio26", "gpio27", "gpio28",
+	"gpio29", "gpio30", "gpio31", "gpio32", "gpio33", "gpio34", "gpio35",
+	"gpio36", "gpio37", "gpio38", "gpio39", "gpio40", "gpio41", "gpio42",
+	"gpio43", "gpio44", "gpio45", "gpio46", "gpio47", "gpio48", "gpio49",
+	"gpio50", "gpio51", "gpio52", "gpio53", "gpio54", "gpio55", "gpio56",
+	"gpio57", "gpio58", "gpio59", "gpio60", "gpio61", "gpio62", "gpio63",
+	"gpio64", "gpio65", "gpio66", "gpio67", "gpio68", "gpio69", "gpio70",
+	"gpio71", "gpio72", "gpio73", "gpio74", "gpio75", "gpio76", "gpio77",
+	"gpio78", "gpio79", "gpio80", "gpio81", "gpio82", "gpio83", "gpio84",
+	"gpio85", "gpio86", "gpio87", "gpio88", "gpio89", "gpio90", "gpio91",
+	"gpio92", "gpio93", "gpio94", "gpio95", "gpio96", "gpio97", "gpio98",
+	"gpio99", "gpio100", "gpio101", "gpio102", "gpio103", "gpio104",
+	"gpio105", "gpio106", "gpio107", "gpio108", "gpio109", "gpio110",
+	"gpio111", "gpio112", "gpio113", "gpio114", "gpio115", "gpio116",
+	"gpio117", "gpio118", "gpio119", "gpio120", "gpio121", "gpio122",
+	"gpio123", "gpio124", "gpio125", "gpio126", "gpio127", "gpio128",
+	"gpio129", "gpio130", "gpio131", "gpio132", "gpio133", "gpio134",
+	"gpio135",
+};
+static const char * const atest_char_groups[] = {
+	"gpio95", "gpio97", "gpio98", "gpio99", "gpio100",
+};
+static const char * const atest_usb0_groups[] = {
+	"gpio75", "gpio10", "gpio78", "gpio79", "gpio80",
+};
+static const char * const audio_ref_clk_groups[] = {
+	"gpio71",
+};
+static const char * const cam_mclk_groups[] = {
+	"gpio36", "gpio37", "gpio38", "gpio39",
+};
+static const char * const cci_async_in0_groups[] = {
+	"gpio40",
+};
+static const char * const cci_i2c_groups[] = {
+	"gpio45", "gpio47", "gpio49", "gpio44",
+	"gpio46", "gpio48",
+};
+static const char * const cci_groups[] = {
+	"gpio40", "gpio41", "gpio42", "gpio43",
+};
+static const char * const cmu_rng_groups[] = {
+	"gpio28", "gpio3", "gpio1", "gpio0",
+};
+static const char * const coex_uart1_rx_groups[] = {
+	"gpio54",
+};
+static const char * const coex_uart1_tx_groups[] = {
+	"gpio55",
+};
+static const char * const cri_trng_groups[] = {
+	"gpio42", "gpio40", "gpio41",
+};
+static const char * const dbg_out_clk_groups[] = {
+	"gpio80",
+};
+static const char * const ddr_bist_groups[] = {
+	"gpio32", "gpio29", "gpio30", "gpio31",
+};
+static const char * const ddr_pxi0_test_groups[] = {
+	"gpio90", "gpio127",
+};
+static const char * const ddr_pxi1_test_groups[] = {
+	"gpio118", "gpio122",
+};
+static const char * const gcc_gp1_clk_groups[] = {
+	"gpio37", "gpio48",
+};
+static const char * const gcc_gp2_clk_groups[] = {
+	"gpio30", "gpio49",
+};
+static const char * const gcc_gp3_clk_groups[] = {
+	"gpio3", "gpio50",
+};
+static const char * const host2wlan_sol_groups[] = {
+	"gpio106",
+};
+static const char * const ibi_i3c_qup0_groups[] = {
+	"gpio4", "gpio5",
+};
+static const char * const ibi_i3c_qup1_groups[] = {
+	"gpio0", "gpio1",
+};
+static const char * const jitter_bist_ref_groups[] = {
+	"gpio90",
+};
+static const char * const mdp_vsync0_out_groups[] = {
+	"gpio93",
+};
+static const char * const mdp_vsync1_out_groups[] = {
+	"gpio93",
+};
+static const char * const mdp_vsync2_out_groups[] = {
+	"gpio22",
+};
+static const char * const mdp_vsync3_out_groups[] = {
+	"gpio22",
+};
+static const char * const mdp_vsync_groups[] = {
+	"gpio26", "gpio22", "gpio30", "gpio34", "gpio93", "gpio97",
+};
+static const char * const nav_groups[] = {
+	"gpio81", "gpio83", "gpio84",
+};
+static const char * const pcie0_clk_req_groups[] = {
+	"gpio107",
+};
+static const char * const phase_flag_groups[] = {
+	"gpio7", "gpio8", "gpio9", "gpio11", "gpio13", "gpio14", "gpio15",
+	"gpio17", "gpio18", "gpio19", "gpio21", "gpio24", "gpio25", "gpio31",
+	"gpio32", "gpio33", "gpio35", "gpio61", "gpio72", "gpio82", "gpio91",
+	"gpio95", "gpio97", "gpio98", "gpio99", "gpio100", "gpio105", "gpio115",
+	"gpio116", "gpio117", "gpio133", "gpio135",
+};
+static const char * const pll_bist_sync_groups[] = {
+	"gpio73",
+};
+static const char * const pll_clk_aux_groups[] = {
+	"gpio108",
+};
+static const char * const prng_rosc_groups[] = {
+	"gpio36", "gpio37", "gpio38", "gpio39",
+};
+static const char * const qdss_cti_trig0_groups[] = {
+	"gpio26", "gpio60", "gpio113", "gpio114",
+};
+static const char * const qdss_cti_trig1_groups[] = {
+	"gpio6", "gpio27", "gpio57", "gpio58",
+};
+static const char * const qdss_gpio_groups[] = {
+	"gpio0", "gpio1", "gpio3", "gpio4", "gpio5", "gpio7", "gpio8", "gpio9",
+	"gpio14", "gpio15", "gpio17", "gpio23", "gpio31", "gpio32", "gpio33", "gpio35",
+	"gpio36", "gpio37", "gpio38", "gpio39", "gpio40", "gpio41", "gpio42", "gpio43",
+	"gpio44", "gpio45", "gpio46" "gpio47", "gpio49",  "gpio59", "gpio62", "gpio118",
+	"gpio121", "gpio122", "gpio126", "gpio127",
+};
+static const char * const qlink0_enable_groups[] = {
+	"gpio88",
+};
+static const char * const qlink0_request_groups[] = {
+	"gpio87",
+};
+static const char * const qlink0_wmss_reset_groups[] = {
+	"gpio89",
+};
+static const char * const qup0_se0_groups[] = {
+	"gpio4", "gpio5", "gpio34", "gpio35",
+};
+static const char * const qup0_se1_groups[] = {
+	"gpio10", "gpio11", "gpio12", "gpio13",
+};
+static const char * const qup0_se2_groups[] = {
+	"gpio14", "gpio15", "gpio16", "gpio17",
+};
+static const char * const qup0_se3_groups[] = {
+	"gpio18", "gpio19", "gpio20", "gpio21",
+};
+static const char * const qup0_se4_groups[] = {
+	"gpio6", "gpio7", "gpio8", "gpio9",
+	"gpio26", "gpio27", "gpio34",
+};
+static const char * const qup1_se0_groups[] = {
+	"gpio0", "gpio1", "gpio2", "gpio3",
+};
+static const char * const qup1_se1_groups[] = {
+	"gpio26", "gpio27", "gpio50", "gpio51",
+};
+static const char * const qup1_se2_groups[] = {
+	"gpio22", "gpio23", "gpio31", "gpio32",
+};
+static const char * const qup1_se3_groups[] = {
+	"gpio24", "gpio25", "gpio51", "gpio50",
+};
+static const char * const qup1_se4_groups[] = {
+	"gpio43", "gpio48", "gpio49", "gpio90",
+	"gpio91",
+};
+static const char * const sd_write_protect_groups[] = {
+	"gpio102",
+};
+static const char * const tb_trig_sdc1_groups[] = {
+	"gpio128",
+};
+static const char * const tb_trig_sdc2_groups[] = {
+	"gpio51",
+};
+static const char * const tgu_ch0_trigout_groups[] = {
+	"gpio20",
+};
+static const char * const tgu_ch1_trigout_groups[] = {
+	"gpio21",
+};
+static const char * const tgu_ch2_trigout_groups[] = {
+	"gpio22",
+};
+static const char * const tgu_ch3_trigout_groups[] = {
+	"gpio23",
+};
+static const char * const tmess_prng_groups[] = {
+	"gpio57", "gpio58", "gpio59", "gpio60",
+};
+static const char * const tsense_pwm1_out_groups[] = {
+	"gpio134",
+};
+static const char * const tsense_pwm2_out_groups[] = {
+	"gpio134",
+};
+static const char * const uim0_groups[] = {
+	"gpio64", "gpio63", "gpio66", "gpio65",
+};
+static const char * const uim1_groups[] = {
+	"gpio68", "gpio67", "gpio69", "gpio70",
+};
+static const char * const usb0_hs_ac_groups[] = {
+	"gpio99",
+};
+static const char * const usb0_phy_ps_groups[] = {
+	"gpio94",
+};
+static const char * const vfr_0_mira_groups[] = {
+	"gpio19",
+};
+static const char * const vfr_0_mirb_groups[] = {
+	"gpio100",
+};
+static const char * const vfr_1_groups[] = {
+	"gpio84",
+};
+static const char * const vsense_trigger_mirnat_groups[] = {
+	"gpio75",
+};
+static const char * const wlan1_adc_dtest0_groups[] = {
+	"gpio79",
+};
+static const char * const wlan1_adc_dtest1_groups[] = {
+	"gpio80",
+};
+
+static const struct pinfunction sm4450_functions[] = {
+	MSM_PIN_FUNCTION(gpio),
+	MSM_PIN_FUNCTION(atest_char),
+	MSM_PIN_FUNCTION(atest_usb0),
+	MSM_PIN_FUNCTION(audio_ref_clk),
+	MSM_PIN_FUNCTION(cam_mclk),
+	MSM_PIN_FUNCTION(cci_async_in0),
+	MSM_PIN_FUNCTION(cci_i2c),
+	MSM_PIN_FUNCTION(cci),
+	MSM_PIN_FUNCTION(cmu_rng),
+	MSM_PIN_FUNCTION(coex_uart1_rx),
+	MSM_PIN_FUNCTION(coex_uart1_tx),
+	MSM_PIN_FUNCTION(cri_trng),
+	MSM_PIN_FUNCTION(dbg_out_clk),
+	MSM_PIN_FUNCTION(ddr_bist),
+	MSM_PIN_FUNCTION(ddr_pxi0_test),
+	MSM_PIN_FUNCTION(ddr_pxi1_test),
+	MSM_PIN_FUNCTION(gcc_gp1_clk),
+	MSM_PIN_FUNCTION(gcc_gp2_clk),
+	MSM_PIN_FUNCTION(gcc_gp3_clk),
+	MSM_PIN_FUNCTION(host2wlan_sol),
+	MSM_PIN_FUNCTION(ibi_i3c_qup0),
+	MSM_PIN_FUNCTION(ibi_i3c_qup1),
+	MSM_PIN_FUNCTION(jitter_bist_ref),
+	MSM_PIN_FUNCTION(mdp_vsync0_out),
+	MSM_PIN_FUNCTION(mdp_vsync1_out),
+	MSM_PIN_FUNCTION(mdp_vsync2_out),
+	MSM_PIN_FUNCTION(mdp_vsync3_out),
+	MSM_PIN_FUNCTION(mdp_vsync),
+	MSM_PIN_FUNCTION(nav),
+	MSM_PIN_FUNCTION(pcie0_clk_req),
+	MSM_PIN_FUNCTION(phase_flag),
+	MSM_PIN_FUNCTION(pll_bist_sync),
+	MSM_PIN_FUNCTION(pll_clk_aux),
+	MSM_PIN_FUNCTION(prng_rosc),
+	MSM_PIN_FUNCTION(qdss_cti_trig0),
+	MSM_PIN_FUNCTION(qdss_cti_trig1),
+	MSM_PIN_FUNCTION(qdss_gpio),
+	MSM_PIN_FUNCTION(qlink0_enable),
+	MSM_PIN_FUNCTION(qlink0_request),
+	MSM_PIN_FUNCTION(qlink0_wmss_reset),
+	MSM_PIN_FUNCTION(qup0_se0),
+	MSM_PIN_FUNCTION(qup0_se1),
+	MSM_PIN_FUNCTION(qup0_se2),
+	MSM_PIN_FUNCTION(qup0_se3),
+	MSM_PIN_FUNCTION(qup0_se4),
+	MSM_PIN_FUNCTION(qup1_se0),
+	MSM_PIN_FUNCTION(qup1_se1),
+	MSM_PIN_FUNCTION(qup1_se2),
+	MSM_PIN_FUNCTION(qup1_se3),
+	MSM_PIN_FUNCTION(qup1_se4),
+	MSM_PIN_FUNCTION(sd_write_protect),
+	MSM_PIN_FUNCTION(tb_trig_sdc1),
+	MSM_PIN_FUNCTION(tb_trig_sdc2),
+	MSM_PIN_FUNCTION(tgu_ch0_trigout),
+	MSM_PIN_FUNCTION(tgu_ch1_trigout),
+	MSM_PIN_FUNCTION(tgu_ch2_trigout),
+	MSM_PIN_FUNCTION(tgu_ch3_trigout),
+	MSM_PIN_FUNCTION(tmess_prng),
+	MSM_PIN_FUNCTION(tsense_pwm1_out),
+	MSM_PIN_FUNCTION(tsense_pwm2_out),
+	MSM_PIN_FUNCTION(uim0),
+	MSM_PIN_FUNCTION(uim1),
+	MSM_PIN_FUNCTION(usb0_hs_ac),
+	MSM_PIN_FUNCTION(usb0_phy_ps),
+	MSM_PIN_FUNCTION(vfr_0_mira),
+	MSM_PIN_FUNCTION(vfr_0_mirb),
+	MSM_PIN_FUNCTION(vfr_1),
+	MSM_PIN_FUNCTION(vsense_trigger_mirnat),
+	MSM_PIN_FUNCTION(wlan1_adc_dtest0),
+	MSM_PIN_FUNCTION(wlan1_adc_dtest1),
+};
+
+/*
+ * Every pin is maintained as a single group, and missing or non-existing pin
+ * would be maintained as dummy group to synchronize pin group index with
+ * pin descriptor registered with pinctrl core.
+ * Clients would not be able to request these dummy pin groups.
+ */
+static const struct msm_pingroup sm4450_groups[] = {
+	[0] = PINGROUP(0, qup1_se0, ibi_i3c_qup1, cmu_rng, qdss_gpio, _, _, _, _, _),
+	[1] = PINGROUP(1, qup1_se0, ibi_i3c_qup1, cmu_rng, qdss_gpio, _, _, _, _, _),
+	[2] = PINGROUP(2, qup1_se0, _, _, _, _, _, _, _, _),
+	[3] = PINGROUP(3, qup1_se0, gcc_gp3_clk, cmu_rng, qdss_gpio, _, _, _, _, _),
+	[4] = PINGROUP(4, qup0_se0, ibi_i3c_qup0, qdss_gpio, _,_, _, _, _, _),
+	[5] = PINGROUP(5, qup0_se0, ibi_i3c_qup0, qdss_gpio, _, _, _, _, _, _),
+	[6] = PINGROUP(6, qup0_se4, qdss_cti_trig1, _, _, _, _, _, _, _),
+	[7] = PINGROUP(7, qup0_se4, _, phase_flag, qdss_gpio, _, _, _, _, _),
+	[8] = PINGROUP(8, qup0_se4, _, phase_flag, qdss_gpio, _, _, _, _, _),
+	[9] = PINGROUP(9, qup0_se4, _, phase_flag, qdss_gpio, _, _, _, _, _),
+	[10] = PINGROUP(10, qup0_se1, _, atest_usb0, _, _, _, _, _, _),
+	[11] = PINGROUP(11, qup0_se1, _, phase_flag, _, _, _, _, _, _),
+	[12] = PINGROUP(12, qup0_se1, _, _, _, _, _, _, _, _),
+	[13] = PINGROUP(13, qup0_se1, _, phase_flag, _, _, _, _, _, _),
+	[14] = PINGROUP(14, qup0_se2, _, phase_flag, _, qdss_gpio, _, _, _, _),
+	[15] = PINGROUP(15, qup0_se2, _, phase_flag, _, qdss_gpio, _, _, _, _),
+	[16] = PINGROUP(16, qup0_se2, _, _, _, _, _, _, _, _),
+	[17] = PINGROUP(17, qup0_se2, _, phase_flag, _, qdss_gpio, _, _, _, _),
+	[18] = PINGROUP(18, qup0_se3, _, phase_flag, _, _, _, _, _, _),
+	[19] = PINGROUP(19, qup0_se3, vfr_0_mira, _, phase_flag, _, _, _, _, _),
+	[20] = PINGROUP(20, qup0_se3, tgu_ch0_trigout, _, _, _, _, _, _, _),
+	[21] = PINGROUP(21, qup0_se3, _, phase_flag, tgu_ch1_trigout, _, _, _, _, _),
+	[22] = PINGROUP(22, qup1_se2, mdp_vsync, mdp_vsync2_out, mdp_vsync3_out, tgu_ch2_trigout, _, _, _, _),
+	[23] = PINGROUP(23, qup1_se2, tgu_ch3_trigout, qdss_gpio, _, _, _, _, _, _),
+	[24] = PINGROUP(24, qup1_se3, _, phase_flag, _, _, _, _, _, _),
+	[25] = PINGROUP(25, qup1_se3, _, phase_flag, _, _, _, _, _, _),
+	[26] = PINGROUP(26, qup1_se1, mdp_vsync, qup0_se4, qdss_cti_trig0, _, _, _, _, _),
+	[27] = PINGROUP(27, qup1_se1, qup0_se4, qdss_cti_trig1, _, _, _, _, _, _),
+	[28] = PINGROUP(28, cmu_rng, _, _, _, _, _, _, _, _),
+	[29] = PINGROUP(29, ddr_bist, _, _, _, _, _, _, _, _),
+	[30] = PINGROUP(30, mdp_vsync, gcc_gp2_clk, ddr_bist, _, _, _, _, _, _),
+	[31] = PINGROUP(31, qup1_se2, _, phase_flag, ddr_bist, qdss_gpio, _, _, _, _),
+	[32] = PINGROUP(32, qup1_se2, _, phase_flag, ddr_bist, qdss_gpio, _, _, _, _),
+	[33] = PINGROUP(33, _, phase_flag, qdss_gpio, _, _, _, _, _, _),
+	[34] = PINGROUP(34, qup0_se0, qup0_se4, mdp_vsync, _, _, _, _, _, _),
+	[35] = PINGROUP(35, qup0_se0, _, phase_flag, qdss_gpio, _, _, _, _, _),
+	[36] = PINGROUP(36, cam_mclk, prng_rosc, qdss_gpio, _, _, _, _, _, _),
+	[37] = PINGROUP(37, cam_mclk, gcc_gp1_clk, prng_rosc, qdss_gpio, _, _, _, _, _),
+	[38] = PINGROUP(38, cam_mclk, prng_rosc, qdss_gpio, _, _, _, _, _, _),
+	[39] = PINGROUP(39, cam_mclk, prng_rosc, qdss_gpio, _, _, _, _, _, _),
+	[40] = PINGROUP(40, cci, cci_async_in0, cri_trng, qdss_gpio, _, _, _, _, _),
+	[41] = PINGROUP(41, cci, cri_trng, qdss_gpio, _, _, _, _, _, _),
+	[42] = PINGROUP(42, cci, cri_trng, qdss_gpio, _, _, _, _, _, _),
+	[43] = PINGROUP(43, cci, qup1_se4, qdss_gpio, _, _, _, _, _, _),
+	[44] = PINGROUP(44, cci_i2c, qdss_gpio, _, _, _, _, _, _, _),
+	[45] = PINGROUP(45, cci_i2c, qdss_gpio, _, _, _, _, _, _, _),
+	[46] = PINGROUP(46, cci_i2c, qdss_gpio, _, _, _, _, _, _, _),
+	[47] = PINGROUP(47, cci_i2c, qdss_gpio, _, _, _, _, _, _, _),
+	[48] = PINGROUP(48, cci_i2c, qup1_se4, gcc_gp1_clk, _, _, _, _, _, _),
+	[49] = PINGROUP(49, cci_i2c, qup1_se4, gcc_gp2_clk, qdss_gpio, _, _, _, _, _),
+	[50] = PINGROUP(50, qup1_se1, qup1_se3, _, gcc_gp3_clk, _, _, _, _, _),
+	[51] = PINGROUP(51, qup1_se1, qup1_se3, _, tb_trig_sdc2, _, _, _, _, _),
+	[52] = PINGROUP(52, _, _, _, _, _, _, _, _, _),
+	[53] = PINGROUP(53, _, _, _, _, _, _, _, _, _),
+	[54] = PINGROUP(54, coex_uart1_rx, _, _, _, _, _, _, _, _),
+	[55] = PINGROUP(55, coex_uart1_tx, _, _, _, _, _, _, _, _),
+	[56] = PINGROUP(56, _, _, _, _, _, _, _, _, _),
+	[57] = PINGROUP(57, tmess_prng, qdss_cti_trig1, _, _, _, _, _, _, _),
+	[58] = PINGROUP(58, tmess_prng, qdss_cti_trig1, _, _, _, _, _, _, _),
+	[59] = PINGROUP(59, tmess_prng, qdss_gpio, _, _, _, _, _, _, _),
+	[60] = PINGROUP(60, tmess_prng, qdss_cti_trig0, _, _, _, _, _, _, _),
+	[61] = PINGROUP(61, _, phase_flag, _, _, _, _, _, _, _),
+	[62] = PINGROUP(62, qdss_gpio, _, _, _, _, _, _, _, _),
+	[63] = PINGROUP(63, uim0, _, _, _, _, _, _, _, _),
+	[64] = PINGROUP(64, uim0, _, _, _, _, _, _, _, _),
+	[65] = PINGROUP(65, uim0, _, _, _, _, _, _, _, _),
+	[66] = PINGROUP(66, uim0, _, _, _, _, _, _, _, _),
+	[67] = PINGROUP(67, uim1, _, _, _, _, _, _, _, _),
+	[68] = PINGROUP(68, uim1, _, _, _, _, _, _, _, _),
+	[69] = PINGROUP(69, uim1, _, _, _, _, _, _, _, _),
+	[70] = PINGROUP(70, uim1, _, _, _, _, _, _, _, _),
+	[71] = PINGROUP(71, _, _, _, audio_ref_clk, _, _, _, _, _),
+	[72] = PINGROUP(72, _, _, _, phase_flag, _, _, _, _, _),
+	[73] = PINGROUP(73, _, _, _, pll_bist_sync, _, _, _, _, _),
+	[74] = PINGROUP(74, _, _, _, _, _, _, _, _, _),
+	[75] = PINGROUP(75, _, _, _, vsense_trigger_mirnat, atest_usb0, _, _, _, _),
+	[76] = PINGROUP(76, _, _, _, _, _, _, _, _, _),
+	[77] = PINGROUP(77, _, _, _, _, _, _, _, _, _),
+	[78] = PINGROUP(78, _, _, _, atest_usb0, _, _, _, _, _),
+	[79] = PINGROUP(79, _, _, _, wlan1_adc_dtest0, atest_usb0, _, _, _, _),
+	[80] = PINGROUP(80, _, _, dbg_out_clk, wlan1_adc_dtest1, atest_usb0, _, _, _, _),
+	[81] = PINGROUP(81, _, nav, _, _, _, _, _, _, _),
+	[82] = PINGROUP(82, _, _, phase_flag, _, _, _, _, _, _),
+	[83] = PINGROUP(83, nav, _, _, _, _, _, _, _, _),
+	[84] = PINGROUP(84, nav, vfr_1, _, _, _, _, _, _, _),
+	[85] = PINGROUP(85, _, _, _, _, _, _, _, _, _),
+	[86] = PINGROUP(86, _, _, _, _, _, _, _, _, _),
+	[87] = PINGROUP(87, qlink0_request, _, _, _, _, _, _, _, _),
+	[88] = PINGROUP(88, qlink0_enable, _, _, _, _, _, _, _, _),
+	[89] = PINGROUP(89, qlink0_wmss_reset, _, _, _, _, _, _, _, _),
+	[90] = PINGROUP(90, qup1_se4, jitter_bist_ref, ddr_pxi0_test, _, _, _, _, _, _),
+	[91] = PINGROUP(91, qup1_se4, _, phase_flag, _, _, _, _, _, _),
+	[92] = PINGROUP(92, _, _, _, _, _, _, _, _, _),
+	[93] = PINGROUP(93, mdp_vsync, mdp_vsync0_out, mdp_vsync1_out, _, _, _, _, _, _),
+	[94] = PINGROUP(94, usb0_phy_ps, _, _, _, _, _, _, _, _),
+	[95] = PINGROUP(95, _, phase_flag, atest_char, _, _, _, _, _, _),
+	[96] = PINGROUP(96, _, _, _, _, _, _, _, _, _),
+	[97] = PINGROUP(97, mdp_vsync, _, phase_flag, atest_char, _, _, _, _, _),
+	[98] = PINGROUP(98, _, phase_flag, atest_char, _, _, _, _, _, _),
+	[99] = PINGROUP(99, usb0_hs_ac, _, phase_flag, atest_char, _, _, _, _, _),
+	[100] = PINGROUP(100, vfr_0_mirb, _, phase_flag, atest_char, _, _, _, _, _),
+	[101] = PINGROUP(101, _, _, _, _, _, _, _, _, _),
+	[102] = PINGROUP(102, sd_write_protect, _, _, _, _, _, _, _, _),
+	[103] = PINGROUP(103, _, _, _, _, _, _, _, _, _),
+	[104] = PINGROUP(104, _, _, _, _, _, _, _, _, _),
+	[105] = PINGROUP(105, _, phase_flag, _, _, _, _, _, _, _),
+	[106] = PINGROUP(106, host2wlan_sol, _, _, _, _, _, _, _, _),
+	[107] = PINGROUP(107, pcie0_clk_req, _, _, _, _, _, _, _, _),
+	[108] = PINGROUP(108, pll_clk_aux, _, _, _, _, _, _, _, _),
+	[109] = PINGROUP(109, _, _, _, _, _, _, _, _, _),
+	[110] = PINGROUP(110, _, _, _, _, _, _, _, _, _),
+	[111] = PINGROUP(111, _, _, _, _, _, _, _, _, _),
+	[112] = PINGROUP(112, _, _, _, _, _, _, _, _, _),
+	[113] = PINGROUP(113, qdss_cti_trig0, _, _, _, _, _, _, _, _),
+	[114] = PINGROUP(114, qdss_cti_trig0, _, _, _, _, _, _, _, _),
+	[115] = PINGROUP(115, _, phase_flag, _, _, _, _, _, _, _),
+	[116] = PINGROUP(116, _, phase_flag, _, _, _, _, _, _, _),
+	[117] = PINGROUP(117, _, phase_flag, _, _, _, _, _, _, _),
+	[118] = PINGROUP(118, qdss_gpio, _, ddr_pxi1_test, _, _, _, _, _, _),
+	[119] = PINGROUP(119, _, _, _, _, _, _, _, _, _),
+	[120] = PINGROUP(120, _, _, _, _, _, _, _, _, _),
+	[121] = PINGROUP(121, qdss_gpio, _, _, _, _, _, _, _, _),
+	[122] = PINGROUP(122, qdss_gpio, _, ddr_pxi1_test, _, _, _, _, _, _),
+	[123] = PINGROUP(123, _, _, _, _, _, _, _, _, _),
+	[124] = PINGROUP(124, _, _, _, _, _, _, _, _, _),
+	[125] = PINGROUP(125, _, _, _, _, _, _, _, _, _),
+	[126] = PINGROUP(126, qdss_gpio, _, _, _, _, _, _, _, _),
+	[127] = PINGROUP(127, qdss_gpio, ddr_pxi0_test, _, _, _, _, _, _, _),
+	[128] = PINGROUP(128, tb_trig_sdc1, _, _, _, _, _, _, _, _),
+	[129] = PINGROUP(129, _, _, _, _, _, _, _, _, _),
+	[130] = PINGROUP(130, _, _, _, _, _, _, _, _, _),
+	[131] = PINGROUP(131, _, _, _, _, _, _, _, _, _),
+	[132] = PINGROUP(132, _, _, _, _, _, _, _, _, _),
+	[133] = PINGROUP(133, _, phase_flag, _, _, _, _, _, _, _),
+	[134] = PINGROUP(134, tsense_pwm1_out, tsense_pwm2_out, _, _, _, _, _, _, _),
+	[135] = PINGROUP(135, _, phase_flag, _, _, _, _, _, _, _),
+	[136] = UFS_RESET(ufs_reset, 0x197000),
+	[137] = SDC_QDSD_PINGROUP(sdc1_rclk, 0x18c004, 0, 0),
+	[138] = SDC_QDSD_PINGROUP(sdc1_clk, 0x18c000, 13, 6),
+	[139] = SDC_QDSD_PINGROUP(sdc1_cmd, 0x18c000, 11, 3),
+	[140] = SDC_QDSD_PINGROUP(sdc1_data, 0x18c000, 9, 0),
+	[141] = SDC_QDSD_PINGROUP(sdc2_clk, 0x18f000, 14, 6),
+	[142] = SDC_QDSD_PINGROUP(sdc2_cmd, 0x18f000, 11, 3),
+	[143] = SDC_QDSD_PINGROUP(sdc2_data, 0x18f000, 9, 0),
+};
+
+static const struct msm_gpio_wakeirq_map sm4450_pdc_map[] = {
+	{ 0, 67 }, { 3, 82 }, { 4, 69 }, { 5, 70 }, { 6, 44 }, { 7, 43 },
+	{ 8, 71 }, { 9, 86 }, { 10, 48 }, { 11, 77 }, { 12, 90 },
+	{ 13, 54 }, { 14, 91 }, { 17, 97 }, { 18, 102 }, { 21, 103 },
+	{ 22, 104 }, { 23, 105 }, { 24, 53 }, { 25, 106 }, { 26, 65 },
+	{ 27, 55 }, { 28, 89 }, { 30, 80 }, { 31, 109 }, { 33, 87 },
+	{ 34, 81 }, { 35, 75 }, { 40, 88 }, { 41, 98 }, { 42, 110 },
+	{ 43, 95 }, { 47, 118 }, { 50, 111 }, { 52, 52 }, { 53, 114 },
+	{ 54, 115 }, { 55, 99 }, { 56, 45 }, { 57, 85 }, { 58, 56 },
+	{ 59, 84 }, { 60, 83 }, { 61, 96 }, { 62, 93 }, { 66, 116 },
+	{ 67, 113 }, { 70, 42 }, { 71, 122 }, { 73, 119 }, { 75, 121 },
+	{ 77, 120 }, { 79, 123 }, { 81, 124 }, { 83, 64 }, { 84, 128 },
+	{ 86, 129 }, { 87, 63 }, { 91, 92 }, { 92, 66 }, { 93, 125 },
+	{ 94, 76 }, { 95, 62 }, { 96, 132 }, { 97, 135 }, { 98, 73 },
+	{ 99, 133 }, { 101, 46 }, { 102, 134 }, { 103, 49 }, { 105, 58 },
+	{ 107, 94 }, { 110, 59 }, { 113, 57 }, { 114, 60 }, { 118, 107 },
+	{ 120, 61 }, { 121, 108 }, { 123, 68 }, { 125, 72 }, { 128, 112 },
+};
+
+static const struct msm_pinctrl_soc_data sm4450_tlmm = {
+	.pins = sm4450_pins,
+	.npins = ARRAY_SIZE(sm4450_pins),
+	.functions = sm4450_functions,
+	.nfunctions = ARRAY_SIZE(sm4450_functions),
+	.groups = sm4450_groups,
+	.ngroups = ARRAY_SIZE(sm4450_groups),
+	.ngpios = 137,
+	.wakeirq_map = sm4450_pdc_map,
+	.nwakeirq_map = ARRAY_SIZE(sm4450_pdc_map),
+};
+
+static int sm4450_tlmm_probe(struct platform_device *pdev)
+{
+	return msm_pinctrl_probe(pdev, &sm4450_tlmm);
+}
+
+static const struct of_device_id sm4450_tlmm_of_match[] = {
+	{ .compatible = "qcom,sm4450-tlmm", },
+	{ }
+};
+
+static struct platform_driver sm4450_tlmm_driver = {
+	.driver = {
+		.name = "sm4450-tlmm",
+		.of_match_table = sm4450_tlmm_of_match,
+	},
+	.probe = sm4450_tlmm_probe,
+	.remove = msm_pinctrl_remove,
+};
+MODULE_DEVICE_TABLE(of, sm4450_tlmm_of_match);
+
+static int __init sm4450_tlmm_init(void)
+{
+	return platform_driver_register(&sm4450_tlmm_driver);
+}
+arch_initcall(sm4450_tlmm_init);
+
+static void __exit sm4450_tlmm_exit(void)
+{
+	platform_driver_unregister(&sm4450_tlmm_driver);
+}
+module_exit(sm4450_tlmm_exit);
+
+MODULE_DESCRIPTION("QTI SM4450 TLMM driver");
+MODULE_LICENSE("GPL");
-- 
2.17.1

[PATCH v5 3/4] pinctrl: qcom: sm4450: Convert to platform remove callback returning void

[Tengfei Fan]

Use .remove_new() instead of .remove() for converting to platform remove
callback returning void.

Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
---
 drivers/pinctrl/qcom/pinctrl-sm4450.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pinctrl/qcom/pinctrl-sm4450.c b/drivers/pinctrl/qcom/pinctrl-sm4450.c
index 20ad639087ed..49e2e3a7a9cb 100644
--- a/drivers/pinctrl/qcom/pinctrl-sm4450.c
+++ b/drivers/pinctrl/qcom/pinctrl-sm4450.c
@@ -993,7 +993,7 @@ static struct platform_driver sm4450_tlmm_driver = {
 		.of_match_table = sm4450_tlmm_of_match,
 	},
 	.probe = sm4450_tlmm_probe,
-	.remove = msm_pinctrl_remove,
+	.remove_new = msm_pinctrl_remove,
 };
 MODULE_DEVICE_TABLE(of, sm4450_tlmm_of_match);
 
-- 
2.17.1

[PATCH v5 4/4] pinctrl: qcom: sm4450: correct incorrect address offset

[Tengfei Fan]

The address offset of 0x100000 is already provided in SM4450 DTSI, so
subtract 0x100000 from the offset which used by ufs and sdc.

Suggested-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
---
 drivers/pinctrl/qcom/pinctrl-sm4450.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/pinctrl/qcom/pinctrl-sm4450.c b/drivers/pinctrl/qcom/pinctrl-sm4450.c
index 49e2e3a7a9cb..5496f955ed2a 100644
--- a/drivers/pinctrl/qcom/pinctrl-sm4450.c
+++ b/drivers/pinctrl/qcom/pinctrl-sm4450.c
@@ -936,14 +936,14 @@ static const struct msm_pingroup sm4450_groups[] = {
 	[133] = PINGROUP(133, _, phase_flag, _, _, _, _, _, _, _),
 	[134] = PINGROUP(134, tsense_pwm1_out, tsense_pwm2_out, _, _, _, _, _, _, _),
 	[135] = PINGROUP(135, _, phase_flag, _, _, _, _, _, _, _),
-	[136] = UFS_RESET(ufs_reset, 0x197000),
-	[137] = SDC_QDSD_PINGROUP(sdc1_rclk, 0x18c004, 0, 0),
-	[138] = SDC_QDSD_PINGROUP(sdc1_clk, 0x18c000, 13, 6),
-	[139] = SDC_QDSD_PINGROUP(sdc1_cmd, 0x18c000, 11, 3),
-	[140] = SDC_QDSD_PINGROUP(sdc1_data, 0x18c000, 9, 0),
-	[141] = SDC_QDSD_PINGROUP(sdc2_clk, 0x18f000, 14, 6),
-	[142] = SDC_QDSD_PINGROUP(sdc2_cmd, 0x18f000, 11, 3),
-	[143] = SDC_QDSD_PINGROUP(sdc2_data, 0x18f000, 9, 0),
+	[136] = UFS_RESET(ufs_reset, 0x97000),
+	[137] = SDC_QDSD_PINGROUP(sdc1_rclk, 0x8c004, 0, 0),
+	[138] = SDC_QDSD_PINGROUP(sdc1_clk, 0x8c000, 13, 6),
+	[139] = SDC_QDSD_PINGROUP(sdc1_cmd, 0x8c000, 11, 3),
+	[140] = SDC_QDSD_PINGROUP(sdc1_data, 0x8c000, 9, 0),
+	[141] = SDC_QDSD_PINGROUP(sdc2_clk, 0x8f000, 14, 6),
+	[142] = SDC_QDSD_PINGROUP(sdc2_cmd, 0x8f000, 11, 3),
+	[143] = SDC_QDSD_PINGROUP(sdc2_data, 0x8f000, 9, 0),
 };
 
 static const struct msm_gpio_wakeirq_map sm4450_pdc_map[] = {
-- 
2.17.1

Re: [PATCH v5 3/4] pinctrl: qcom: sm4450: Convert to platform remove callback returning void

[Konrad Dybcio]

On 30.11.2023 03:40, Tengfei Fan wrote:
> Use .remove_new() instead of .remove() for converting to platform remove
> callback returning void.
> 
> Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
> ---
You misunderstood me, this series now introduces a driver with known
issues and patches them up right away in subsequent changes.

What you should do in such situations is squash the fixups into the
newly added driver (e.g. by running git rebase -i baseofyourtree and
changing 'pick' to 'f' (for 'fixup') on the last two patches).

Konrad

Re: [PATCH v5 2/4] pinctrl: qcom: Add SM4450 pinctrl driver

[kernel test robot]

Hi Tengfei,

kernel test robot noticed the following build warnings:

[auto build test WARNING on linusw-pinctrl/devel]
[also build test WARNING on linusw-pinctrl/for-next linus/master v6.7-rc3 next-20231130]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/Tengfei-Fan/pinctrl-qcom-Add-SM4450-pinctrl-driver/20231130-114914
base:   https://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl.git devel
patch link:    https://lore.kernel.org/r/20231130024046.25938-3-quic_tengfan%40quicinc.com
patch subject: [PATCH v5 2/4] pinctrl: qcom: Add SM4450 pinctrl driver
config: i386-allmodconfig (https://download.01.org/0day-ci/archive/20231130/202311301909.pcIvnNks-lkp@intel.com/config)
compiler: clang version 16.0.4 (https://github.com/llvm/llvm-project.git ae42196bc493ffe877a7e3dff8be32035dea4d07)
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20231130/202311301909.pcIvnNks-lkp@intel.com/reproduce)

If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202311301909.pcIvnNks-lkp@intel.com/

All warnings (new ones prefixed by >>):

>> drivers/pinctrl/qcom/pinctrl-sm4450.c:618:31: warning: suspicious concatenation of string literals in an array initialization; did you mean to separate the elements with a comma? [-Wstring-concatenation]
           "gpio44", "gpio45", "gpio46" "gpio47", "gpio49",  "gpio59", "gpio62", "gpio118",
                                        ^
                                       ,
   drivers/pinctrl/qcom/pinctrl-sm4450.c:618:22: note: place parentheses around the string literal to silence warning
           "gpio44", "gpio45", "gpio46" "gpio47", "gpio49",  "gpio59", "gpio62", "gpio118",
                               ^
   drivers/pinctrl/qcom/pinctrl-sm4450.c:996:12: error: incompatible function pointer types initializing 'int (*)(struct platform_device *)' with an expression of type 'void (struct platform_device *)' [-Wincompatible-function-pointer-types]
           .remove = msm_pinctrl_remove,
                     ^~~~~~~~~~~~~~~~~~
   1 warning and 1 error generated.


vim +618 drivers/pinctrl/qcom/pinctrl-sm4450.c

   480	
   481	static const char * const gpio_groups[] = {
   482		"gpio0", "gpio1", "gpio2", "gpio3", "gpio4", "gpio5", "gpio6", "gpio7",
   483		"gpio8", "gpio9", "gpio10", "gpio11", "gpio12", "gpio13", "gpio14",
   484		"gpio15", "gpio16", "gpio17", "gpio18", "gpio19", "gpio20", "gpio21",
   485		"gpio22", "gpio23", "gpio24", "gpio25", "gpio26", "gpio27", "gpio28",
   486		"gpio29", "gpio30", "gpio31", "gpio32", "gpio33", "gpio34", "gpio35",
   487		"gpio36", "gpio37", "gpio38", "gpio39", "gpio40", "gpio41", "gpio42",
   488		"gpio43", "gpio44", "gpio45", "gpio46", "gpio47", "gpio48", "gpio49",
   489		"gpio50", "gpio51", "gpio52", "gpio53", "gpio54", "gpio55", "gpio56",
   490		"gpio57", "gpio58", "gpio59", "gpio60", "gpio61", "gpio62", "gpio63",
   491		"gpio64", "gpio65", "gpio66", "gpio67", "gpio68", "gpio69", "gpio70",
   492		"gpio71", "gpio72", "gpio73", "gpio74", "gpio75", "gpio76", "gpio77",
   493		"gpio78", "gpio79", "gpio80", "gpio81", "gpio82", "gpio83", "gpio84",
   494		"gpio85", "gpio86", "gpio87", "gpio88", "gpio89", "gpio90", "gpio91",
   495		"gpio92", "gpio93", "gpio94", "gpio95", "gpio96", "gpio97", "gpio98",
   496		"gpio99", "gpio100", "gpio101", "gpio102", "gpio103", "gpio104",
   497		"gpio105", "gpio106", "gpio107", "gpio108", "gpio109", "gpio110",
   498		"gpio111", "gpio112", "gpio113", "gpio114", "gpio115", "gpio116",
   499		"gpio117", "gpio118", "gpio119", "gpio120", "gpio121", "gpio122",
   500		"gpio123", "gpio124", "gpio125", "gpio126", "gpio127", "gpio128",
   501		"gpio129", "gpio130", "gpio131", "gpio132", "gpio133", "gpio134",
   502		"gpio135",
   503	};
   504	static const char * const atest_char_groups[] = {
   505		"gpio95", "gpio97", "gpio98", "gpio99", "gpio100",
   506	};
   507	static const char * const atest_usb0_groups[] = {
   508		"gpio75", "gpio10", "gpio78", "gpio79", "gpio80",
   509	};
   510	static const char * const audio_ref_clk_groups[] = {
   511		"gpio71",
   512	};
   513	static const char * const cam_mclk_groups[] = {
   514		"gpio36", "gpio37", "gpio38", "gpio39",
   515	};
   516	static const char * const cci_async_in0_groups[] = {
   517		"gpio40",
   518	};
   519	static const char * const cci_i2c_groups[] = {
   520		"gpio45", "gpio47", "gpio49", "gpio44",
   521		"gpio46", "gpio48",
   522	};
   523	static const char * const cci_groups[] = {
   524		"gpio40", "gpio41", "gpio42", "gpio43",
   525	};
   526	static const char * const cmu_rng_groups[] = {
   527		"gpio28", "gpio3", "gpio1", "gpio0",
   528	};
   529	static const char * const coex_uart1_rx_groups[] = {
   530		"gpio54",
   531	};
   532	static const char * const coex_uart1_tx_groups[] = {
   533		"gpio55",
   534	};
   535	static const char * const cri_trng_groups[] = {
   536		"gpio42", "gpio40", "gpio41",
   537	};
   538	static const char * const dbg_out_clk_groups[] = {
   539		"gpio80",
   540	};
   541	static const char * const ddr_bist_groups[] = {
   542		"gpio32", "gpio29", "gpio30", "gpio31",
   543	};
   544	static const char * const ddr_pxi0_test_groups[] = {
   545		"gpio90", "gpio127",
   546	};
   547	static const char * const ddr_pxi1_test_groups[] = {
   548		"gpio118", "gpio122",
   549	};
   550	static const char * const gcc_gp1_clk_groups[] = {
   551		"gpio37", "gpio48",
   552	};
   553	static const char * const gcc_gp2_clk_groups[] = {
   554		"gpio30", "gpio49",
   555	};
   556	static const char * const gcc_gp3_clk_groups[] = {
   557		"gpio3", "gpio50",
   558	};
   559	static const char * const host2wlan_sol_groups[] = {
   560		"gpio106",
   561	};
   562	static const char * const ibi_i3c_qup0_groups[] = {
   563		"gpio4", "gpio5",
   564	};
   565	static const char * const ibi_i3c_qup1_groups[] = {
   566		"gpio0", "gpio1",
   567	};
   568	static const char * const jitter_bist_ref_groups[] = {
   569		"gpio90",
   570	};
   571	static const char * const mdp_vsync0_out_groups[] = {
   572		"gpio93",
   573	};
   574	static const char * const mdp_vsync1_out_groups[] = {
   575		"gpio93",
   576	};
   577	static const char * const mdp_vsync2_out_groups[] = {
   578		"gpio22",
   579	};
   580	static const char * const mdp_vsync3_out_groups[] = {
   581		"gpio22",
   582	};
   583	static const char * const mdp_vsync_groups[] = {
   584		"gpio26", "gpio22", "gpio30", "gpio34", "gpio93", "gpio97",
   585	};
   586	static const char * const nav_groups[] = {
   587		"gpio81", "gpio83", "gpio84",
   588	};
   589	static const char * const pcie0_clk_req_groups[] = {
   590		"gpio107",
   591	};
   592	static const char * const phase_flag_groups[] = {
   593		"gpio7", "gpio8", "gpio9", "gpio11", "gpio13", "gpio14", "gpio15",
   594		"gpio17", "gpio18", "gpio19", "gpio21", "gpio24", "gpio25", "gpio31",
   595		"gpio32", "gpio33", "gpio35", "gpio61", "gpio72", "gpio82", "gpio91",
   596		"gpio95", "gpio97", "gpio98", "gpio99", "gpio100", "gpio105", "gpio115",
   597		"gpio116", "gpio117", "gpio133", "gpio135",
   598	};
   599	static const char * const pll_bist_sync_groups[] = {
   600		"gpio73",
   601	};
   602	static const char * const pll_clk_aux_groups[] = {
   603		"gpio108",
   604	};
   605	static const char * const prng_rosc_groups[] = {
   606		"gpio36", "gpio37", "gpio38", "gpio39",
   607	};
   608	static const char * const qdss_cti_trig0_groups[] = {
   609		"gpio26", "gpio60", "gpio113", "gpio114",
   610	};
   611	static const char * const qdss_cti_trig1_groups[] = {
   612		"gpio6", "gpio27", "gpio57", "gpio58",
   613	};
   614	static const char * const qdss_gpio_groups[] = {
   615		"gpio0", "gpio1", "gpio3", "gpio4", "gpio5", "gpio7", "gpio8", "gpio9",
   616		"gpio14", "gpio15", "gpio17", "gpio23", "gpio31", "gpio32", "gpio33", "gpio35",
   617		"gpio36", "gpio37", "gpio38", "gpio39", "gpio40", "gpio41", "gpio42", "gpio43",
 > 618		"gpio44", "gpio45", "gpio46" "gpio47", "gpio49",  "gpio59", "gpio62", "gpio118",
   619		"gpio121", "gpio122", "gpio126", "gpio127",
   620	};
   621	static const char * const qlink0_enable_groups[] = {
   622		"gpio88",
   623	};
   624	static const char * const qlink0_request_groups[] = {
   625		"gpio87",
   626	};
   627	static const char * const qlink0_wmss_reset_groups[] = {
   628		"gpio89",
   629	};
   630	static const char * const qup0_se0_groups[] = {
   631		"gpio4", "gpio5", "gpio34", "gpio35",
   632	};
   633	static const char * const qup0_se1_groups[] = {
   634		"gpio10", "gpio11", "gpio12", "gpio13",
   635	};
   636	static const char * const qup0_se2_groups[] = {
   637		"gpio14", "gpio15", "gpio16", "gpio17",
   638	};
   639	static const char * const qup0_se3_groups[] = {
   640		"gpio18", "gpio19", "gpio20", "gpio21",
   641	};
   642	static const char * const qup0_se4_groups[] = {
   643		"gpio6", "gpio7", "gpio8", "gpio9",
   644		"gpio26", "gpio27", "gpio34",
   645	};
   646	static const char * const qup1_se0_groups[] = {
   647		"gpio0", "gpio1", "gpio2", "gpio3",
   648	};
   649	static const char * const qup1_se1_groups[] = {
   650		"gpio26", "gpio27", "gpio50", "gpio51",
   651	};
   652	static const char * const qup1_se2_groups[] = {
   653		"gpio22", "gpio23", "gpio31", "gpio32",
   654	};
   655	static const char * const qup1_se3_groups[] = {
   656		"gpio24", "gpio25", "gpio51", "gpio50",
   657	};
   658	static const char * const qup1_se4_groups[] = {
   659		"gpio43", "gpio48", "gpio49", "gpio90",
   660		"gpio91",
   661	};
   662	static const char * const sd_write_protect_groups[] = {
   663		"gpio102",
   664	};
   665	static const char * const tb_trig_sdc1_groups[] = {
   666		"gpio128",
   667	};
   668	static const char * const tb_trig_sdc2_groups[] = {
   669		"gpio51",
   670	};
   671	static const char * const tgu_ch0_trigout_groups[] = {
   672		"gpio20",
   673	};
   674	static const char * const tgu_ch1_trigout_groups[] = {
   675		"gpio21",
   676	};
   677	static const char * const tgu_ch2_trigout_groups[] = {
   678		"gpio22",
   679	};
   680	static const char * const tgu_ch3_trigout_groups[] = {
   681		"gpio23",
   682	};
   683	static const char * const tmess_prng_groups[] = {
   684		"gpio57", "gpio58", "gpio59", "gpio60",
   685	};
   686	static const char * const tsense_pwm1_out_groups[] = {
   687		"gpio134",
   688	};
   689	static const char * const tsense_pwm2_out_groups[] = {
   690		"gpio134",
   691	};
   692	static const char * const uim0_groups[] = {
   693		"gpio64", "gpio63", "gpio66", "gpio65",
   694	};
   695	static const char * const uim1_groups[] = {
   696		"gpio68", "gpio67", "gpio69", "gpio70",
   697	};
   698	static const char * const usb0_hs_ac_groups[] = {
   699		"gpio99",
   700	};
   701	static const char * const usb0_phy_ps_groups[] = {
   702		"gpio94",
   703	};
   704	static const char * const vfr_0_mira_groups[] = {
   705		"gpio19",
   706	};
   707	static const char * const vfr_0_mirb_groups[] = {
   708		"gpio100",
   709	};
   710	static const char * const vfr_1_groups[] = {
   711		"gpio84",
   712	};
   713	static const char * const vsense_trigger_mirnat_groups[] = {
   714		"gpio75",
   715	};
   716	static const char * const wlan1_adc_dtest0_groups[] = {
   717		"gpio79",
   718	};
   719	static const char * const wlan1_adc_dtest1_groups[] = {
   720		"gpio80",
   721	};
   722	

-- 
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki

Re: [PATCH v5 1/4] dt-bindings: pinctrl: qcom: Add SM4450 pinctrl

[Krzysztof Kozlowski]

On 30/11/2023 03:40, Tengfei Fan wrote:
> Add device tree binding Documentation details for Qualcomm SM4450
> TLMM device.
> 

Please use scripts/get_maintainers.pl to get a list of necessary people
and lists to CC. It might happen, that command when run on an older
kernel, gives you outdated entries. Therefore please be sure you base
your patches on recent Linux kernel.

You missed at least devicetree list (maybe more), so this won't be
tested by automated tooling. Performing review on untested code might be
a waste of time, thus I will skip this patch entirely till you follow
the process allowing the patch to be tested.

Please kindly resend and include all necessary To/Cc entries.


> ---
>  .../bindings/pinctrl/qcom,sm4450-tlmm.yaml    | 151 ++++++++++++++++++
>  1 file changed, 151 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sm4450-tlmm.yaml
> 

...

> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    tlmm: pinctrl@f100000 {
> +      compatible = "qcom,sm4450-tlmm";
> +      reg = <0x0f100000 0x300000>;
> +      gpio-controller;
> +      #gpio-cells = <2>;
> +      gpio-ranges = <&tlmm 0 0 137>;
> +      interrupt-controller;
> +      #interrupt-cells = <2>;
> +      interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
> +
> +      gpio-wo-state {
> +          pins = "gpio1";

Messed indentation.



Best regards,
Krzysztof

Re: [PATCH v5 2/4] pinctrl: qcom: Add SM4450 pinctrl driver

[Krzysztof Kozlowski]

On 30/11/2023 03:40, Tengfei Fan wrote:
> Add pinctrl driver for TLMM block found in SM4450 SoC.
> 
> Reviewed-by: Bjorn Andersson <andersson@kernel.org>
> Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
> ---
>  drivers/pinctrl/qcom/Kconfig.msm      |    8 +
>  drivers/pinctrl/qcom/Makefile         |    1 +
>  drivers/pinctrl/qcom/pinctrl-sm4450.c | 1013 +++++++++++++++++++++++++
>  3 files changed, 1022 insertions(+)
>  create mode 100644 drivers/pinctrl/qcom/pinctrl-sm4450.c
> 

Hm, was this patch ever built?

Best regards,
Krzysztof

Re: [PATCH v5 4/4] pinctrl: qcom: sm4450: correct incorrect address offset

[Bjorn Andersson]

On Thu, Nov 30, 2023 at 10:40:46AM +0800, Tengfei Fan wrote:
> The address offset of 0x100000 is already provided in SM4450 DTSI, so
> subtract 0x100000 from the offset which used by ufs and sdc.
> 

As Konrad points out, please fix the broken patch, don't add a separate
fix in the same series.

> Suggested-by: Can Guo <quic_cang@quicinc.com>

We unfortunately don't have a way to give credit to those providing
review feedback, so omit this when fixing patch #2.

Regards,
Bjorn

> Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
> ---
>  drivers/pinctrl/qcom/pinctrl-sm4450.c | 16 ++++++++--------
>  1 file changed, 8 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/pinctrl/qcom/pinctrl-sm4450.c b/drivers/pinctrl/qcom/pinctrl-sm4450.c
> index 49e2e3a7a9cb..5496f955ed2a 100644
> --- a/drivers/pinctrl/qcom/pinctrl-sm4450.c
> +++ b/drivers/pinctrl/qcom/pinctrl-sm4450.c
> @@ -936,14 +936,14 @@ static const struct msm_pingroup sm4450_groups[] = {
>  	[133] = PINGROUP(133, _, phase_flag, _, _, _, _, _, _, _),
>  	[134] = PINGROUP(134, tsense_pwm1_out, tsense_pwm2_out, _, _, _, _, _, _, _),
>  	[135] = PINGROUP(135, _, phase_flag, _, _, _, _, _, _, _),
> -	[136] = UFS_RESET(ufs_reset, 0x197000),
> -	[137] = SDC_QDSD_PINGROUP(sdc1_rclk, 0x18c004, 0, 0),
> -	[138] = SDC_QDSD_PINGROUP(sdc1_clk, 0x18c000, 13, 6),
> -	[139] = SDC_QDSD_PINGROUP(sdc1_cmd, 0x18c000, 11, 3),
> -	[140] = SDC_QDSD_PINGROUP(sdc1_data, 0x18c000, 9, 0),
> -	[141] = SDC_QDSD_PINGROUP(sdc2_clk, 0x18f000, 14, 6),
> -	[142] = SDC_QDSD_PINGROUP(sdc2_cmd, 0x18f000, 11, 3),
> -	[143] = SDC_QDSD_PINGROUP(sdc2_data, 0x18f000, 9, 0),
> +	[136] = UFS_RESET(ufs_reset, 0x97000),
> +	[137] = SDC_QDSD_PINGROUP(sdc1_rclk, 0x8c004, 0, 0),
> +	[138] = SDC_QDSD_PINGROUP(sdc1_clk, 0x8c000, 13, 6),
> +	[139] = SDC_QDSD_PINGROUP(sdc1_cmd, 0x8c000, 11, 3),
> +	[140] = SDC_QDSD_PINGROUP(sdc1_data, 0x8c000, 9, 0),
> +	[141] = SDC_QDSD_PINGROUP(sdc2_clk, 0x8f000, 14, 6),
> +	[142] = SDC_QDSD_PINGROUP(sdc2_cmd, 0x8f000, 11, 3),
> +	[143] = SDC_QDSD_PINGROUP(sdc2_data, 0x8f000, 9, 0),
>  };
>  
>  static const struct msm_gpio_wakeirq_map sm4450_pdc_map[] = {
> -- 
> 2.17.1
> 

Re: [PATCH v5 2/4] pinctrl: qcom: Add SM4450 pinctrl driver

[Tengfei Fan]

在 11/30/2023 7:57 PM, Krzysztof Kozlowski 写道:
> On 30/11/2023 03:40, Tengfei Fan wrote:
>> Add pinctrl driver for TLMM block found in SM4450 SoC.
>>
>> Reviewed-by: Bjorn Andersson <andersson@kernel.org>
>> Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
>> ---
>>   drivers/pinctrl/qcom/Kconfig.msm      |    8 +
>>   drivers/pinctrl/qcom/Makefile         |    1 +
>>   drivers/pinctrl/qcom/pinctrl-sm4450.c | 1013 +++++++++++++++++++++++++
>>   3 files changed, 1022 insertions(+)
>>   create mode 100644 drivers/pinctrl/qcom/pinctrl-sm4450.c
>>
> 
> Hm, was this patch ever built?
> 
> Best regards,
> Krzysztof
> 
This patch has been built before, I will check and compare if there are 
any errors and changes when I submitted this patch series.

-- 
Thx and BRs,
Tengfei Fan

Re: [PATCH v5 3/4] pinctrl: qcom: sm4450: Convert to platform remove callback returning void

[Tengfei Fan]

在 11/30/2023 6:36 PM, Konrad Dybcio 写道:
> On 30.11.2023 03:40, Tengfei Fan wrote:
>> Use .remove_new() instead of .remove() for converting to platform remove
>> callback returning void.
>>
>> Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
>> ---
> You misunderstood me, this series now introduces a driver with known
> issues and patches them up right away in subsequent changes.
> 
> What you should do in such situations is squash the fixups into the
> newly added driver (e.g. by running git rebase -i baseofyourtree and
> changing 'pick' to 'f' (for 'fixup') on the last two patches).
> 
> Konrad
> 
> 
I understand what you meain, I should combine these two fix patches and 
the driver patch into a complete patch.


-- 
Thx and BRs,
Tengfei Fan

Re: [PATCH v5 4/4] pinctrl: qcom: sm4450: correct incorrect address offset

[Tengfei Fan]

在 12/2/2023 5:36 AM, Bjorn Andersson 写道:
> On Thu, Nov 30, 2023 at 10:40:46AM +0800, Tengfei Fan wrote:
>> The address offset of 0x100000 is already provided in SM4450 DTSI, so
>> subtract 0x100000 from the offset which used by ufs and sdc.
>>
> 
> As Konrad points out, please fix the broken patch, don't add a separate
> fix in the same series.
Sure, I will do this as comments.
> 
>> Suggested-by: Can Guo <quic_cang@quicinc.com>
> 
> We unfortunately don't have a way to give credit to those providing
> review feedback, so omit this when fixing patch #2.
Sure, I will omit this in next version patch series.
> 
> Regards,
> Bjorn
> 
>> Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
>> ---
>>   drivers/pinctrl/qcom/pinctrl-sm4450.c | 16 ++++++++--------
>>   1 file changed, 8 insertions(+), 8 deletions(-)
>>
>> diff --git a/drivers/pinctrl/qcom/pinctrl-sm4450.c b/drivers/pinctrl/qcom/pinctrl-sm4450.c
>> index 49e2e3a7a9cb..5496f955ed2a 100644
>> --- a/drivers/pinctrl/qcom/pinctrl-sm4450.c
>> +++ b/drivers/pinctrl/qcom/pinctrl-sm4450.c
>> @@ -936,14 +936,14 @@ static const struct msm_pingroup sm4450_groups[] = {
>>   	[133] = PINGROUP(133, _, phase_flag, _, _, _, _, _, _, _),
>>   	[134] = PINGROUP(134, tsense_pwm1_out, tsense_pwm2_out, _, _, _, _, _, _, _),
>>   	[135] = PINGROUP(135, _, phase_flag, _, _, _, _, _, _, _),
>> -	[136] = UFS_RESET(ufs_reset, 0x197000),
>> -	[137] = SDC_QDSD_PINGROUP(sdc1_rclk, 0x18c004, 0, 0),
>> -	[138] = SDC_QDSD_PINGROUP(sdc1_clk, 0x18c000, 13, 6),
>> -	[139] = SDC_QDSD_PINGROUP(sdc1_cmd, 0x18c000, 11, 3),
>> -	[140] = SDC_QDSD_PINGROUP(sdc1_data, 0x18c000, 9, 0),
>> -	[141] = SDC_QDSD_PINGROUP(sdc2_clk, 0x18f000, 14, 6),
>> -	[142] = SDC_QDSD_PINGROUP(sdc2_cmd, 0x18f000, 11, 3),
>> -	[143] = SDC_QDSD_PINGROUP(sdc2_data, 0x18f000, 9, 0),
>> +	[136] = UFS_RESET(ufs_reset, 0x97000),
>> +	[137] = SDC_QDSD_PINGROUP(sdc1_rclk, 0x8c004, 0, 0),
>> +	[138] = SDC_QDSD_PINGROUP(sdc1_clk, 0x8c000, 13, 6),
>> +	[139] = SDC_QDSD_PINGROUP(sdc1_cmd, 0x8c000, 11, 3),
>> +	[140] = SDC_QDSD_PINGROUP(sdc1_data, 0x8c000, 9, 0),
>> +	[141] = SDC_QDSD_PINGROUP(sdc2_clk, 0x8f000, 14, 6),
>> +	[142] = SDC_QDSD_PINGROUP(sdc2_cmd, 0x8f000, 11, 3),
>> +	[143] = SDC_QDSD_PINGROUP(sdc2_data, 0x8f000, 9, 0),
>>   };
>>   
>>   static const struct msm_gpio_wakeirq_map sm4450_pdc_map[] = {
>> -- 
>> 2.17.1
>>

-- 
Thx and BRs,
Tengfei Fan

Re: [PATCH v5 2/4] pinctrl: qcom: Add SM4450 pinctrl driver

[Krzysztof Kozlowski]

On 04/12/2023 02:57, Tengfei Fan wrote:
> 
> 
> 在 11/30/2023 7:57 PM, Krzysztof Kozlowski 写道:
>> On 30/11/2023 03:40, Tengfei Fan wrote:
>>> Add pinctrl driver for TLMM block found in SM4450 SoC.
>>>
>>> Reviewed-by: Bjorn Andersson <andersson@kernel.org>
>>> Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
>>> ---
>>>   drivers/pinctrl/qcom/Kconfig.msm      |    8 +
>>>   drivers/pinctrl/qcom/Makefile         |    1 +
>>>   drivers/pinctrl/qcom/pinctrl-sm4450.c | 1013 +++++++++++++++++++++++++
>>>   3 files changed, 1022 insertions(+)
>>>   create mode 100644 drivers/pinctrl/qcom/pinctrl-sm4450.c
>>>
>>
>> Hm, was this patch ever built?
>>
>> Best regards,
>> Krzysztof
>>
> This patch has been built before, I will check and compare if there are 
> any errors and changes when I submitted this patch series.
> 

No, it wasn't built. I just tried - applied it and:

pinctrl-sm4450.c:996:19: error: initialization of ‘int (*)(struct
platform_device *)’ from incompatible pointer type ‘void (*)(struct
platform_device *)’ [-Werror=incompatible-pointer-types]
  996 |         .remove = msm_pinctrl_remove,
      |                   ^~~~~~~~~~~~~~~~~~
../drivers/pinctrl/qcom/pinctrl-sm4450.c:996:19: note: (near
initialization for ‘sm4450_tlmm_driver.remove’)

So you just sent a patch which was not even compiled.

NAK.

Best regards,
Krzysztof

Re: [PATCH v5 2/4] pinctrl: qcom: Add SM4450 pinctrl driver

[Tengfei Fan]

在 12/4/2023 3:56 PM, Krzysztof Kozlowski 写道:
> On 04/12/2023 02:57, Tengfei Fan wrote:
>>
>>
>> 在 11/30/2023 7:57 PM, Krzysztof Kozlowski 写道:
>>> On 30/11/2023 03:40, Tengfei Fan wrote:
>>>> Add pinctrl driver for TLMM block found in SM4450 SoC.
>>>>
>>>> Reviewed-by: Bjorn Andersson <andersson@kernel.org>
>>>> Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
>>>> ---
>>>>    drivers/pinctrl/qcom/Kconfig.msm      |    8 +
>>>>    drivers/pinctrl/qcom/Makefile         |    1 +
>>>>    drivers/pinctrl/qcom/pinctrl-sm4450.c | 1013 +++++++++++++++++++++++++
>>>>    3 files changed, 1022 insertions(+)
>>>>    create mode 100644 drivers/pinctrl/qcom/pinctrl-sm4450.c
>>>>
>>>
>>> Hm, was this patch ever built?
>>>
>>> Best regards,
>>> Krzysztof
>>>
>> This patch has been built before, I will check and compare if there are
>> any errors and changes when I submitted this patch series.
>>
> 
> No, it wasn't built. I just tried - applied it and:
> 
> pinctrl-sm4450.c:996:19: error: initialization of ‘int (*)(struct
> platform_device *)’ from incompatible pointer type ‘void (*)(struct
> platform_device *)’ [-Werror=incompatible-pointer-types]
>    996 |         .remove = msm_pinctrl_remove,
>        |                   ^~~~~~~~~~~~~~~~~~
> ../drivers/pinctrl/qcom/pinctrl-sm4450.c:996:19: note: (near
> initialization for ‘sm4450_tlmm_driver.remove’)
> 
> So you just sent a patch which was not even compiled.
> 
> NAK.
> 
> Best regards,
> Krzysztof
> 
I compiled all the related patches together, but I did not compile this 
patch separately.
The fact that there is a compilation problem is known, but because the 
patch is already reviewed-by, so a separate patch(patch 3) is submitted 
to fix the compilation error.

The next version patch series will incorpotate the fix patch into this 
pinctrl driver patch as well.


-- 
Thx and BRs,
Tengfei Fan

Re: [PATCH v5 2/4] pinctrl: qcom: Add SM4450 pinctrl driver

[Krzysztof Kozlowski]

On 04/12/2023 09:06, Tengfei Fan wrote:
> 
> 
> 在 12/4/2023 3:56 PM, Krzysztof Kozlowski 写道:
>> On 04/12/2023 02:57, Tengfei Fan wrote:
>>>
>>>
>>> 在 11/30/2023 7:57 PM, Krzysztof Kozlowski 写道:
>>>> On 30/11/2023 03:40, Tengfei Fan wrote:
>>>>> Add pinctrl driver for TLMM block found in SM4450 SoC.
>>>>>
>>>>> Reviewed-by: Bjorn Andersson <andersson@kernel.org>
>>>>> Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
>>>>> ---
>>>>>    drivers/pinctrl/qcom/Kconfig.msm      |    8 +
>>>>>    drivers/pinctrl/qcom/Makefile         |    1 +
>>>>>    drivers/pinctrl/qcom/pinctrl-sm4450.c | 1013 +++++++++++++++++++++++++
>>>>>    3 files changed, 1022 insertions(+)
>>>>>    create mode 100644 drivers/pinctrl/qcom/pinctrl-sm4450.c
>>>>>
>>>>
>>>> Hm, was this patch ever built?
>>>>
>>>> Best regards,
>>>> Krzysztof
>>>>
>>> This patch has been built before, I will check and compare if there are
>>> any errors and changes when I submitted this patch series.
>>>
>>
>> No, it wasn't built. I just tried - applied it and:
>>
>> pinctrl-sm4450.c:996:19: error: initialization of ‘int (*)(struct
>> platform_device *)’ from incompatible pointer type ‘void (*)(struct
>> platform_device *)’ [-Werror=incompatible-pointer-types]
>>    996 |         .remove = msm_pinctrl_remove,
>>        |                   ^~~~~~~~~~~~~~~~~~
>> ../drivers/pinctrl/qcom/pinctrl-sm4450.c:996:19: note: (near
>> initialization for ‘sm4450_tlmm_driver.remove’)
>>
>> So you just sent a patch which was not even compiled.
>>
>> NAK.
>>
>> Best regards,
>> Krzysztof
>>
> I compiled all the related patches together, but I did not compile this 
> patch separately.

We talk about this patch here. Please do not send knowingly wrong code,
because it does not make sense and hurts bisectability.

> The fact that there is a compilation problem is known, but because the 
> patch is already reviewed-by, so a separate patch(patch 3) is submitted 
> to fix the compilation error.

That's not the process. Each patch must be correct. Each.

Best regards,
Krzysztof

Re: [PATCH v5 2/4] pinctrl: qcom: Add SM4450 pinctrl driver

[Tengfei Fan]

在 12/4/2023 4:14 PM, Krzysztof Kozlowski 写道:
> On 04/12/2023 09:06, Tengfei Fan wrote:
>>
>>
>> 在 12/4/2023 3:56 PM, Krzysztof Kozlowski 写道:
>>> On 04/12/2023 02:57, Tengfei Fan wrote:
>>>>
>>>>
>>>> 在 11/30/2023 7:57 PM, Krzysztof Kozlowski 写道:
>>>>> On 30/11/2023 03:40, Tengfei Fan wrote:
>>>>>> Add pinctrl driver for TLMM block found in SM4450 SoC.
>>>>>>
>>>>>> Reviewed-by: Bjorn Andersson <andersson@kernel.org>
>>>>>> Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
>>>>>> ---
>>>>>>     drivers/pinctrl/qcom/Kconfig.msm      |    8 +
>>>>>>     drivers/pinctrl/qcom/Makefile         |    1 +
>>>>>>     drivers/pinctrl/qcom/pinctrl-sm4450.c | 1013 +++++++++++++++++++++++++
>>>>>>     3 files changed, 1022 insertions(+)
>>>>>>     create mode 100644 drivers/pinctrl/qcom/pinctrl-sm4450.c
>>>>>>
>>>>>
>>>>> Hm, was this patch ever built?
>>>>>
>>>>> Best regards,
>>>>> Krzysztof
>>>>>
>>>> This patch has been built before, I will check and compare if there are
>>>> any errors and changes when I submitted this patch series.
>>>>
>>>
>>> No, it wasn't built. I just tried - applied it and:
>>>
>>> pinctrl-sm4450.c:996:19: error: initialization of ‘int (*)(struct
>>> platform_device *)’ from incompatible pointer type ‘void (*)(struct
>>> platform_device *)’ [-Werror=incompatible-pointer-types]
>>>     996 |         .remove = msm_pinctrl_remove,
>>>         |                   ^~~~~~~~~~~~~~~~~~
>>> ../drivers/pinctrl/qcom/pinctrl-sm4450.c:996:19: note: (near
>>> initialization for ‘sm4450_tlmm_driver.remove’)
>>>
>>> So you just sent a patch which was not even compiled.
>>>
>>> NAK.
>>>
>>> Best regards,
>>> Krzysztof
>>>
>> I compiled all the related patches together, but I did not compile this
>> patch separately.
> 
> We talk about this patch here. Please do not send knowingly wrong code,
> because it does not make sense and hurts bisectability.
Sure, I will avoid similar problems in the future.
> 
>> The fact that there is a compilation problem is known, but because the
>> patch is already reviewed-by, so a separate patch(patch 3) is submitted
>> to fix the compilation error.
> 
> That's not the process. Each patch must be correct. Each.
Yes, the correctness of each patch will be ensured in the future.
> 
> Best regards,
> Krzysztof
> 

-- 
Thx and BRs,
Tengfei Fan

Re: [PATCH v5 4/4] pinctrl: qcom: sm4450: correct incorrect address offset

[Linus Walleij]

On Fri, Dec 1, 2023 at 10:33 PM Bjorn Andersson <andersson@kernel.org> wrote:
> On Thu, Nov 30, 2023 at 10:40:46AM +0800, Tengfei Fan wrote:
> > The address offset of 0x100000 is already provided in SM4450 DTSI, so
> > subtract 0x100000 from the offset which used by ufs and sdc.
> >
>
> As Konrad points out, please fix the broken patch, don't add a separate
> fix in the same series.
>
> > Suggested-by: Can Guo <quic_cang@quicinc.com>
>
> We unfortunately don't have a way to give credit to those providing
> review feedback, so omit this when fixing patch #2.

Just write in the commit message that Can Guo helped out in reviewing
the driver (just some free text).

Yours,
Linus Walleij

Re: [PATCH v5 2/4] pinctrl: qcom: Add SM4450 pinctrl driver

[Jeff Johnson]

On 12/3/2023 11:56 PM, Krzysztof Kozlowski wrote:
> On 04/12/2023 02:57, Tengfei Fan wrote:
>>
>>
>> 在 11/30/2023 7:57 PM, Krzysztof Kozlowski 写道:
>>> On 30/11/2023 03:40, Tengfei Fan wrote:
>>>> Add pinctrl driver for TLMM block found in SM4450 SoC.
>>>>
>>>> Reviewed-by: Bjorn Andersson <andersson@kernel.org>
>>>> Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
>>>> ---
>>>>   drivers/pinctrl/qcom/Kconfig.msm      |    8 +
>>>>   drivers/pinctrl/qcom/Makefile         |    1 +
>>>>   drivers/pinctrl/qcom/pinctrl-sm4450.c | 1013 +++++++++++++++++++++++++
>>>>   3 files changed, 1022 insertions(+)
>>>>   create mode 100644 drivers/pinctrl/qcom/pinctrl-sm4450.c
>>>>
>>>
>>> Hm, was this patch ever built?
>>>
>>> Best regards,
>>> Krzysztof
>>>
>> This patch has been built before, I will check and compare if there are 
>> any errors and changes when I submitted this patch series.
>>
> 
> No, it wasn't built. I just tried - applied it and:
> 
> pinctrl-sm4450.c:996:19: error: initialization of ‘int (*)(struct
> platform_device *)’ from incompatible pointer type ‘void (*)(struct
> platform_device *)’ [-Werror=incompatible-pointer-types]
>   996 |         .remove = msm_pinctrl_remove,
>       |                   ^~~~~~~~~~~~~~~~~~
> ../drivers/pinctrl/qcom/pinctrl-sm4450.c:996:19: note: (near
> initialization for ‘sm4450_tlmm_driver.remove’)
> 
> So you just sent a patch which was not even compiled.
> 
> NAK.
> 
> Best regards,
> Krzysztof
> 

The problem here is patch 2/4 incorrectly initializes .remove and patch
3/4 changes it to correctly use .remove_new. Bisection at patch 2
doesn't build.

Those two patches should be squashed

Re: [PATCH v5 4/4] pinctrl: qcom: sm4450: correct incorrect address offset

[Tengfei Fan]

在 12/4/2023 5:57 PM, Linus Walleij 写道:
> On Fri, Dec 1, 2023 at 10:33 PM Bjorn Andersson <andersson@kernel.org> wrote:
>> On Thu, Nov 30, 2023 at 10:40:46AM +0800, Tengfei Fan wrote:
>>> The address offset of 0x100000 is already provided in SM4450 DTSI, so
>>> subtract 0x100000 from the offset which used by ufs and sdc.
>>>
>>
>> As Konrad points out, please fix the broken patch, don't add a separate
>> fix in the same series.
>>
>>> Suggested-by: Can Guo <quic_cang@quicinc.com>
>>
>> We unfortunately don't have a way to give credit to those providing
>> review feedback, so omit this when fixing patch #2.
> 
> Just write in the commit message that Can Guo helped out in reviewing
> the driver (just some free text).
> 
> Yours,
> Linus Walleij
Thanks for your suggestions, The next version patch commit message will 
contain some description information.

-- 
Thx and BRs,
Tengfei Fan

Re: [PATCH v5 2/4] pinctrl: qcom: Add SM4450 pinctrl driver

[Tengfei Fan]

在 12/5/2023 12:04 AM, Jeff Johnson 写道:
> On 12/3/2023 11:56 PM, Krzysztof Kozlowski wrote:
>> On 04/12/2023 02:57, Tengfei Fan wrote:
>>>
>>>
>>> 在 11/30/2023 7:57 PM, Krzysztof Kozlowski 写道:
>>>> On 30/11/2023 03:40, Tengfei Fan wrote:
>>>>> Add pinctrl driver for TLMM block found in SM4450 SoC.
>>>>>
>>>>> Reviewed-by: Bjorn Andersson <andersson@kernel.org>
>>>>> Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
>>>>> ---
>>>>>    drivers/pinctrl/qcom/Kconfig.msm      |    8 +
>>>>>    drivers/pinctrl/qcom/Makefile         |    1 +
>>>>>    drivers/pinctrl/qcom/pinctrl-sm4450.c | 1013 +++++++++++++++++++++++++
>>>>>    3 files changed, 1022 insertions(+)
>>>>>    create mode 100644 drivers/pinctrl/qcom/pinctrl-sm4450.c
>>>>>
>>>>
>>>> Hm, was this patch ever built?
>>>>
>>>> Best regards,
>>>> Krzysztof
>>>>
>>> This patch has been built before, I will check and compare if there are
>>> any errors and changes when I submitted this patch series.
>>>
>>
>> No, it wasn't built. I just tried - applied it and:
>>
>> pinctrl-sm4450.c:996:19: error: initialization of ‘int (*)(struct
>> platform_device *)’ from incompatible pointer type ‘void (*)(struct
>> platform_device *)’ [-Werror=incompatible-pointer-types]
>>    996 |         .remove = msm_pinctrl_remove,
>>        |                   ^~~~~~~~~~~~~~~~~~
>> ../drivers/pinctrl/qcom/pinctrl-sm4450.c:996:19: note: (near
>> initialization for ‘sm4450_tlmm_driver.remove’)
>>
>> So you just sent a patch which was not even compiled.
>>
>> NAK.
>>
>> Best regards,
>> Krzysztof
>>
> 
> The problem here is patch 2/4 incorrectly initializes .remove and patch
> 3/4 changes it to correctly use .remove_new. Bisection at patch 2
> doesn't build.
> 
> Those two patches should be squashed
Yes, next version patch series will squash these two patches.

-- 
Thx and BRs,
Tengfei Fan

Re: [PATCH v5 1/4] dt-bindings: pinctrl: qcom: Add SM4450 pinctrl

[Tengfei Fan]

在 11/30/2023 7:56 PM, Krzysztof Kozlowski 写道:
> On 30/11/2023 03:40, Tengfei Fan wrote:
>> Add device tree binding Documentation details for Qualcomm SM4450
>> TLMM device.
>>
> 
> Please use scripts/get_maintainers.pl to get a list of necessary people
> and lists to CC. It might happen, that command when run on an older
> kernel, gives you outdated entries. Therefore please be sure you base
> your patches on recent Linux kernel.
> 
> You missed at least devicetree list (maybe more), so this won't be
> tested by automated tooling. Performing review on untested code might be
> a waste of time, thus I will skip this patch entirely till you follow
> the process allowing the patch to be tested.
> 
> Please kindly resend and include all necessary To/Cc entries.
Sure, I will ensure that next version patch series base on the latest 
code, and use scripts/get_maintainers.pl to get a list of all necessary 
people and lists.
> 
> 
>> ---
>>   .../bindings/pinctrl/qcom,sm4450-tlmm.yaml    | 151 ++++++++++++++++++
>>   1 file changed, 151 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sm4450-tlmm.yaml
>>
> 
> ...
> 
>> +examples:
>> +  - |
>> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
>> +    tlmm: pinctrl@f100000 {
>> +      compatible = "qcom,sm4450-tlmm";
>> +      reg = <0x0f100000 0x300000>;
>> +      gpio-controller;
>> +      #gpio-cells = <2>;
>> +      gpio-ranges = <&tlmm 0 0 137>;
>> +      interrupt-controller;
>> +      #interrupt-cells = <2>;
>> +      interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
>> +
>> +      gpio-wo-state {
>> +          pins = "gpio1";
> 
> Messed indentation.
I will update this indent issue in next version patch series.
> 
> 
> 
> Best regards,
> Krzysztof
> 

-- 
Thx and BRs,
Tengfei Fan