From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
To: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org, Imre Kaloz <kaloz@openwrt.org>,
Krzysztof Halasa <khc@pm.waw.pl>,
Alexandre Courbot <acourbot@nvidia.com>,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 3/7 v2] input: misc: ixp4-beeper: use gpiolib strictly
Date: Tue, 17 Sep 2013 12:02:02 -0700 [thread overview]
Message-ID: <20130917190202.GC6894@core.coreip.homeip.net> (raw)
In-Reply-To: <1379061160-22361-1-git-send-email-linus.walleij@linaro.org>
On Fri, Sep 13, 2013 at 10:32:40AM +0200, Linus Walleij wrote:
> Request and free the GPIO line used for the beeper properly.
> Then use the gpiolib API to flip the output of the GPIO pin
> instead of relying on hacks to poke the register bits.
>
> Cc: Imre Kaloz <kaloz@openwrt.org>
> Cc: Krzysztof Halasa <khc@pm.waw.pl>
> Cc: Alexandre Courbot <acourbot@nvidia.com>
> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
> Acked-by: Arnd Bergmann <arnd@arndb.de>
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
> ---
> Hi Dmitry, requesting an ACK for this to take it through the
> GPIO tree as part of an IXP4 clean-up attempt.
>
> ChangeLog v1->v2:
> - Invert using the bang ! instead of XOR ~
> ---
> drivers/input/misc/ixp4xx-beeper.c | 13 +++++++++++--
> 1 file changed, 11 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/input/misc/ixp4xx-beeper.c b/drivers/input/misc/ixp4xx-beeper.c
> index f14afd0..17ccba8 100644
> --- a/drivers/input/misc/ixp4xx-beeper.c
> +++ b/drivers/input/misc/ixp4xx-beeper.c
> @@ -76,11 +76,13 @@ static int ixp4xx_spkr_event(struct input_dev *dev, unsigned int type, unsigned
>
> static irqreturn_t ixp4xx_spkr_interrupt(int irq, void *dev_id)
> {
> + unsigned int pin = (unsigned int) dev_id;
> +
> /* clear interrupt */
> *IXP4XX_OSST = IXP4XX_OSST_TIMER_2_PEND;
>
> /* flip the beeper output */
> - *IXP4XX_GPIO_GPOUTR ^= (1 << (unsigned int) dev_id);
> + gpio_set_value(pin, !gpio_get_value(pin));
>
> return IRQ_HANDLED;
> }
> @@ -108,11 +110,15 @@ static int ixp4xx_spkr_probe(struct platform_device *dev)
> input_dev->sndbit[0] = BIT_MASK(SND_BELL) | BIT_MASK(SND_TONE);
> input_dev->event = ixp4xx_spkr_event;
>
> + err = gpio_request(dev->id, "ixp4-beeper");
> + if (err)
> + goto err_free_device;
> +
> err = request_irq(IRQ_IXP4XX_TIMER2, &ixp4xx_spkr_interrupt,
> IRQF_NO_SUSPEND, "ixp4xx-beeper",
> (void *) dev->id);
> if (err)
> - goto err_free_device;
> + goto err_free_gpio;
>
> err = input_register_device(input_dev);
> if (err)
> @@ -124,6 +130,8 @@ static int ixp4xx_spkr_probe(struct platform_device *dev)
>
> err_free_irq:
> free_irq(IRQ_IXP4XX_TIMER2, (void *)dev->id);
> + err_free_gpio:
> + gpio_free(dev->id);
> err_free_device:
> input_free_device(input_dev);
>
> @@ -142,6 +150,7 @@ static int ixp4xx_spkr_remove(struct platform_device *dev)
> ixp4xx_spkr_control(pin, 0);
>
> free_irq(IRQ_IXP4XX_TIMER2, (void *)dev->id);
> + gpio_free(dev->id);
>
> return 0;
> }
> --
> 1.8.3.1
>
--
Dmitry
prev parent reply other threads:[~2013-09-17 19:02 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-13 8:32 [PATCH 3/7 v2] input: misc: ixp4-beeper: use gpiolib strictly Linus Walleij
2013-09-17 19:02 ` Dmitry Torokhov [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130917190202.GC6894@core.coreip.homeip.net \
--to=dmitry.torokhov@gmail.com \
--cc=acourbot@nvidia.com \
--cc=kaloz@openwrt.org \
--cc=khc@pm.waw.pl \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).