* [PATCH 3/7 v2] input: misc: ixp4-beeper: use gpiolib strictly
@ 2013-09-13 8:32 Linus Walleij
2013-09-17 19:02 ` Dmitry Torokhov
0 siblings, 1 reply; 2+ messages in thread
From: Linus Walleij @ 2013-09-13 8:32 UTC (permalink / raw)
To: linux-gpio, Imre Kaloz, Krzysztof Halasa, Dmitry Torokhov,
Dmitry Torokhov
Cc: Alexandre Courbot, linux-arm-kernel, Linus Walleij
Request and free the GPIO line used for the beeper properly.
Then use the gpiolib API to flip the output of the GPIO pin
instead of relying on hacks to poke the register bits.
Cc: Imre Kaloz <kaloz@openwrt.org>
Cc: Krzysztof Halasa <khc@pm.waw.pl>
Cc: Alexandre Courbot <acourbot@nvidia.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
Hi Dmitry, requesting an ACK for this to take it through the
GPIO tree as part of an IXP4 clean-up attempt.
ChangeLog v1->v2:
- Invert using the bang ! instead of XOR ~
---
drivers/input/misc/ixp4xx-beeper.c | 13 +++++++++++--
1 file changed, 11 insertions(+), 2 deletions(-)
diff --git a/drivers/input/misc/ixp4xx-beeper.c b/drivers/input/misc/ixp4xx-beeper.c
index f14afd0..17ccba8 100644
--- a/drivers/input/misc/ixp4xx-beeper.c
+++ b/drivers/input/misc/ixp4xx-beeper.c
@@ -76,11 +76,13 @@ static int ixp4xx_spkr_event(struct input_dev *dev, unsigned int type, unsigned
static irqreturn_t ixp4xx_spkr_interrupt(int irq, void *dev_id)
{
+ unsigned int pin = (unsigned int) dev_id;
+
/* clear interrupt */
*IXP4XX_OSST = IXP4XX_OSST_TIMER_2_PEND;
/* flip the beeper output */
- *IXP4XX_GPIO_GPOUTR ^= (1 << (unsigned int) dev_id);
+ gpio_set_value(pin, !gpio_get_value(pin));
return IRQ_HANDLED;
}
@@ -108,11 +110,15 @@ static int ixp4xx_spkr_probe(struct platform_device *dev)
input_dev->sndbit[0] = BIT_MASK(SND_BELL) | BIT_MASK(SND_TONE);
input_dev->event = ixp4xx_spkr_event;
+ err = gpio_request(dev->id, "ixp4-beeper");
+ if (err)
+ goto err_free_device;
+
err = request_irq(IRQ_IXP4XX_TIMER2, &ixp4xx_spkr_interrupt,
IRQF_NO_SUSPEND, "ixp4xx-beeper",
(void *) dev->id);
if (err)
- goto err_free_device;
+ goto err_free_gpio;
err = input_register_device(input_dev);
if (err)
@@ -124,6 +130,8 @@ static int ixp4xx_spkr_probe(struct platform_device *dev)
err_free_irq:
free_irq(IRQ_IXP4XX_TIMER2, (void *)dev->id);
+ err_free_gpio:
+ gpio_free(dev->id);
err_free_device:
input_free_device(input_dev);
@@ -142,6 +150,7 @@ static int ixp4xx_spkr_remove(struct platform_device *dev)
ixp4xx_spkr_control(pin, 0);
free_irq(IRQ_IXP4XX_TIMER2, (void *)dev->id);
+ gpio_free(dev->id);
return 0;
}
--
1.8.3.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH 3/7 v2] input: misc: ixp4-beeper: use gpiolib strictly
2013-09-13 8:32 [PATCH 3/7 v2] input: misc: ixp4-beeper: use gpiolib strictly Linus Walleij
@ 2013-09-17 19:02 ` Dmitry Torokhov
0 siblings, 0 replies; 2+ messages in thread
From: Dmitry Torokhov @ 2013-09-17 19:02 UTC (permalink / raw)
To: Linus Walleij
Cc: linux-gpio, Imre Kaloz, Krzysztof Halasa, Alexandre Courbot,
linux-arm-kernel
On Fri, Sep 13, 2013 at 10:32:40AM +0200, Linus Walleij wrote:
> Request and free the GPIO line used for the beeper properly.
> Then use the gpiolib API to flip the output of the GPIO pin
> instead of relying on hacks to poke the register bits.
>
> Cc: Imre Kaloz <kaloz@openwrt.org>
> Cc: Krzysztof Halasa <khc@pm.waw.pl>
> Cc: Alexandre Courbot <acourbot@nvidia.com>
> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
> Acked-by: Arnd Bergmann <arnd@arndb.de>
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
> ---
> Hi Dmitry, requesting an ACK for this to take it through the
> GPIO tree as part of an IXP4 clean-up attempt.
>
> ChangeLog v1->v2:
> - Invert using the bang ! instead of XOR ~
> ---
> drivers/input/misc/ixp4xx-beeper.c | 13 +++++++++++--
> 1 file changed, 11 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/input/misc/ixp4xx-beeper.c b/drivers/input/misc/ixp4xx-beeper.c
> index f14afd0..17ccba8 100644
> --- a/drivers/input/misc/ixp4xx-beeper.c
> +++ b/drivers/input/misc/ixp4xx-beeper.c
> @@ -76,11 +76,13 @@ static int ixp4xx_spkr_event(struct input_dev *dev, unsigned int type, unsigned
>
> static irqreturn_t ixp4xx_spkr_interrupt(int irq, void *dev_id)
> {
> + unsigned int pin = (unsigned int) dev_id;
> +
> /* clear interrupt */
> *IXP4XX_OSST = IXP4XX_OSST_TIMER_2_PEND;
>
> /* flip the beeper output */
> - *IXP4XX_GPIO_GPOUTR ^= (1 << (unsigned int) dev_id);
> + gpio_set_value(pin, !gpio_get_value(pin));
>
> return IRQ_HANDLED;
> }
> @@ -108,11 +110,15 @@ static int ixp4xx_spkr_probe(struct platform_device *dev)
> input_dev->sndbit[0] = BIT_MASK(SND_BELL) | BIT_MASK(SND_TONE);
> input_dev->event = ixp4xx_spkr_event;
>
> + err = gpio_request(dev->id, "ixp4-beeper");
> + if (err)
> + goto err_free_device;
> +
> err = request_irq(IRQ_IXP4XX_TIMER2, &ixp4xx_spkr_interrupt,
> IRQF_NO_SUSPEND, "ixp4xx-beeper",
> (void *) dev->id);
> if (err)
> - goto err_free_device;
> + goto err_free_gpio;
>
> err = input_register_device(input_dev);
> if (err)
> @@ -124,6 +130,8 @@ static int ixp4xx_spkr_probe(struct platform_device *dev)
>
> err_free_irq:
> free_irq(IRQ_IXP4XX_TIMER2, (void *)dev->id);
> + err_free_gpio:
> + gpio_free(dev->id);
> err_free_device:
> input_free_device(input_dev);
>
> @@ -142,6 +150,7 @@ static int ixp4xx_spkr_remove(struct platform_device *dev)
> ixp4xx_spkr_control(pin, 0);
>
> free_irq(IRQ_IXP4XX_TIMER2, (void *)dev->id);
> + gpio_free(dev->id);
>
> return 0;
> }
> --
> 1.8.3.1
>
--
Dmitry
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2013-09-17 19:02 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-09-13 8:32 [PATCH 3/7 v2] input: misc: ixp4-beeper: use gpiolib strictly Linus Walleij
2013-09-17 19:02 ` Dmitry Torokhov
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).