configuration for nc pins without pull

["Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>]

Hello,

for a machine I want to configure a pin that is actually not connected
to minimize floating. (I think this is sensible, isn't it?)

For the pinctrl I can use a hog group of the pinctrl device. At least
one of the pins doesn't have a pullup/pulldown configuration though, so
I want to mux it to its gpio function and set the gpio to output and the
desired value.

Is there something nicer than defining an always-on regulator with gpios
= <&gpio4 3 0> to accomplish that without additional code?

Best regards
Uwe

-- 
Pengutronix e.K.                           | Uwe Kleine-König            |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html