Re: [Resend][PATCH] Pinctrl: imx1: fix wrong pin-name resolving

["Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>]

Hello,

On Thu, Jul 16, 2015 at 10:52:58AM +0200, Linus Walleij wrote:
> On Fri, Jun 26, 2015 at 2:26 AM, Chris Ruehl <chris.ruehl@gtsys.com.hk> wrote:
> 
> > Bug in function imx1_pinconf_set() cause crash when
> > princtrl debug is enabled and the pin_id becomes larger
> > then the info->pins[] contains data.
> >
> > imx27-pinctrl 10015000.iomuxc: request pin 134 (MX27_PAD_UART2_TXD) for
> > 1000b000.serial
> > imx27-pinctrl 10015000.iomuxc: request pin 135 (MX27_PAD_UART2_RXD) for
> > 1000b000.serial
> > imx27-pinctrl 10015000.iomuxc: request pin 131 (MX27_PAD_UART2_CTS) for
> > 1000b000.serial
> > imx27-pinctrl 10015000.iomuxc: request pin 132 (MX27_PAD_UART2_RTS) for
> > 1000b000.serial
> > imx27-pinctrl 10015000.iomuxc: enable function uart group uart2-1
> > imx27-pinctrl 10015000.iomuxc: imx1_pmx_set, pin 0x86, function 0, gpio 0,
> > direction 1, oconf 0, iconfa 0, iconfb 0
> > imx27-pinctrl 10015000.iomuxc: imx1_pmx_set, pin 0x87, function 0, gpio 0,
> > direction 0, oconf 0, iconfa 0, iconfb 0
> > imx27-pinctrl 10015000.iomuxc: imx1_pmx_set, pin 0x83, function 0, gpio 0,
> > direction 1, oconf 0, iconfa 0, iconfb 0
> > imx27-pinctrl 10015000.iomuxc: imx1_pmx_set, pin 0x84, function 0, gpio 0,
> > direction 0, oconf 0, iconfa 0, iconfb 0
> > imx27-pinctrl 10015000.iomuxc: num_configs=1 PinID=134
> > imx27-pinctrl 10015000.iomuxc: pinconf set pullup pin MX27_PAD_UART1_RTS
> > imx27-pinctrl 10015000.iomuxc: num_configs=1 PinID=135
> > imx27-pinctrl 10015000.iomuxc: pinconf set pullup pin MX27_PAD_RTCK
> > imx27-pinctrl 10015000.iomuxc: num_configs=1 PinID=131
> > imx27-pinctrl 10015000.iomuxc: pinconf set pullup pin MX27_PAD_UART1_TXD
> > imx27-pinctrl 10015000.iomuxc: num_configs=1 PinID=132
> > imx27-pinctrl 10015000.iomuxc: pinconf set pullup pin MX27_PAD_UART1_RXD
> > ...
> > imx27-pinctrl 10015000.iomuxc: write: register 0xf4415508 offset 4 value 0x3
> > imx27-pinctrl 10015000.iomuxc: write: register 0xf4415510 offset 4 value 0x0
> > imx27-pinctrl 10015000.iomuxc: write: register 0xf4415518 offset 4 value 0x0
> > imx27-pinctrl 10015000.iomuxc: imx1_pmx_set, pin 0xb5, function 0, gpio 0,
> > direction 1, oconf 0, iconfa 0, iconfb 0
> > imx27-pinctrl 10015000.iomuxc: num_configs=1 PinID=171
> > Unable to handle kernel paging request at virtual address 6c61765f
> > pgd = c0004000
> > 6c61765f] *pgd=00000000
> > Internal error: Oops: 5 [#1] ARM
> > Modules linked in:
> > CPU: 0 PID: 1 Comm: swapper Not tainted 4.1.0-rc4-next-20150522-dirty #8
> > Hardware name: GTSYS i.MX27GTSIR (Device Tree Support)
> > task: ce832000 ti: ce848000 task.ti: ce848000
> > PC is at strnlen+0x28/0x3c
> > LR is at string.isra.4+0x34/0xcc
> > pc : [<c01ae188>]    lr : [<c01af9a4>]    psr: 20000093
> > sp : ce849a88  ip : ce849a98  fp : ce849a94
> > r10: c05d7e3a  r9 : c05d81e4  r8 : 00000000
> > r7 : 6c61765f  r6 : c05d81e4  r5 : ffffffff  r4 : c05d7e3a
> > r3 : 6c61765f  r2 : 6c61765f  r1 : 6c61765e  r0 : 6c61765f
> > Flags: nzCv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
> >
> >
> > Signed-off-by: Chris Ruehl <chris.ruehl@gtsys.com.hk>
> 
> Patch applied. Can't seem so see anyone who's safeguarding this
> driver recently, putting some people on To:
I commented in that thread and the outcome from my POV was that the fix
needs a better changelog and it could be optimised to not lookup the pin
if debug is off. (I don't know the patch content, as it was stripped in
the reply.)

Best regards
Uwe

-- 
Pengutronix e.K.                           | Uwe Kleine-König            |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html