Re: [PATCH 1/4] Documentation: tps65086: Add DT bindings for the TPS65086 PMIC

[Lee Jones <lee.jones@linaro.org>]

On Fri, 16 Oct 2015, Andrew F. Davis wrote:

> The TPS65086 PMIC contains several regulators and a GPO controller.
> Add bindings for the TPS65086 PMIC.
> 
> Signed-off-by: Andrew F. Davis <afd@ti.com>
> ---
>  .../devicetree/bindings/gpio/gpio-tps65086.txt     | 17 ++++++++
>  Documentation/devicetree/bindings/mfd/tps65086.txt | 46 ++++++++++++++++++++++
>  .../bindings/regulator/tps65086-regulator.txt      | 36 +++++++++++++++++

Please split these up into separate patches.

There is no functional reason to bundle them up.

>  3 files changed, 99 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/gpio/gpio-tps65086.txt
>  create mode 100644 Documentation/devicetree/bindings/mfd/tps65086.txt
>  create mode 100644 Documentation/devicetree/bindings/regulator/tps65086-regulator.txt

[...]

> diff --git a/Documentation/devicetree/bindings/mfd/tps65086.txt b/Documentation/devicetree/bindings/mfd/tps65086.txt
> new file mode 100644
> index 0000000..4b6aeb4
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/tps65086.txt
> @@ -0,0 +1,46 @@
> +* TPS65086 Power Management Integrated Circuit bindings
> +
> +Required properties:
> + - compatible		: Should be "ti,tps65086".

Any indication that it's a PMIC?

> + - reg			: Slave address.

I2C/SPI?

> + - interrupt-parent	: The parent interrupt controller.

Phandled to ...

> + - interrupts		: The interrupt line the device is connected to.
> + - interrupt-controller	: Marks the device node as an interrupt controller.
> + - #interrupt-cells	: The number of cells to describe an IRQ, this
> +			  should be 2. The first cell is the IRQ number.
> +			  The second cell is the flags, encoded as the trigger
> +			  masks from ../interrupt-controller/interrupts.txt.

Masks?  What masks?

Best to make a link to the header where the flags are defined here.

> +Additional nodes defined in:
> + - Regulators	: ../regulator/tps65086-regulator.txt.
> + - GPIO		: ../gpio/gpio-tps65086.txt.

I'd suggest removing the full stops from all of the lines above.

Just treat them as bullet points like we normally do.

> +Example:
> +
> +	pmic: tps65086@5e {
> +		compatible = "ti,tps65086";
> +		reg = <0x5e>;
> +		interrupt-parent = <&gpio1>;
> +		interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +
> +		regulators {
> +			compatible = "ti,tps65086-regulator";
> +
> +			buck1 {
> +				regulator-name = "vcc1";
> +				regulator-min-microvolt = <1600000>;
> +				regulator-max-microvolt = <1600000>;
> +				regulator-boot-on;
> +				ti,regulator-decay;
> +				ti,regulator-step-size-25mv;
> +			};
> +		};
> +
> +		gpio4: tps65086_gpio {
> +			compatible = "ti,tps65086-gpio";
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +		};
> +	};

[...]

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html