[RFC 01/15] clocksource: atmel: Add missing MFD_SYSCON dependency on HAS_IOMEM

[RFC 01/15] clocksource: atmel: Add missing MFD_SYSCON dependency on HAS_IOMEM

[Krzysztof Kozlowski]

The MFD_SYSCON depends on HAS_IOMEM so when selecting it avoid unmet
direct dependencies.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
 drivers/clocksource/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index c346be650892..5927944b46e0 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -239,6 +239,7 @@ config ATMEL_PIT
 
 config ATMEL_ST
 	bool
+	depends on HAS_IOMEM	# For MFD_SYSCON
 	select CLKSRC_OF
 	select MFD_SYSCON
 
-- 
2.5.0

[RFC 02/15] dmaengine: nxp: Add missing MFD_SYSCON dependency on HAS_IOMEM

[Krzysztof Kozlowski]

The MFD_SYSCON depends on HAS_IOMEM so when selecting it avoid unmet
direct dependencies.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
 drivers/dma/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index c77f214c9466..7fbf96bff280 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -290,6 +290,7 @@ config LPC18XX_DMAMUX
 	bool "NXP LPC18xx/43xx DMA MUX for PL080"
 	depends on ARCH_LPC18XX || COMPILE_TEST
 	depends on OF && AMBA_PL08X
+	depends on HAS_IOMEM	# For MFD_SYSCON
 	select MFD_SYSCON
 	help
 	  Enable support for DMA on NXP LPC18xx/43xx platforms
-- 
2.5.0

[RFC 03/15] hwspinlock: qcom: Add missing MFD_SYSCON dependency on HAS_IOMEM

[Krzysztof Kozlowski]

The MFD_SYSCON depends on HAS_IOMEM so when selecting it avoid unmet
direct dependencies.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
 drivers/hwspinlock/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/hwspinlock/Kconfig b/drivers/hwspinlock/Kconfig
index 73a401662853..5ab2d51dc147 100644
--- a/drivers/hwspinlock/Kconfig
+++ b/drivers/hwspinlock/Kconfig
@@ -21,6 +21,7 @@ config HWSPINLOCK_OMAP
 config HWSPINLOCK_QCOM
 	tristate "Qualcomm Hardware Spinlock device"
 	depends on ARCH_QCOM
+	depends on HAS_IOMEM	# For MFD_SYSCON
 	select HWSPINLOCK
 	select MFD_SYSCON
 	help
-- 
2.5.0

[RFC 04/15] irqchip: st: Add missing MFD_SYSCON dependency on HAS_IOMEM

[Krzysztof Kozlowski]

The MFD_SYSCON depends on HAS_IOMEM so when selecting it avoid unmet
direct dependencies.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
 drivers/irqchip/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index 00bbec6eca0b..10775b099daa 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -157,6 +157,7 @@ config RENESAS_IRQC
 config ST_IRQCHIP
 	bool
 	select REGMAP
+	depends on HAS_IOMEM	# For MFD_SYSCON
 	select MFD_SYSCON
 	help
 	  Enables SysCfg Controlled IRQs on STi based platforms.
-- 
2.5.0

[RFC 05/15] phy: hi6220: Add missing MFD_SYSCON dependency on HAS_IOMEM

[Krzysztof Kozlowski]

The MFD_SYSCON depends on HAS_IOMEM so when selecting it avoid unmet
direct dependencies.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
 drivers/phy/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 0124d17bd9fe..cfdb3551a675 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -225,6 +225,7 @@ config PHY_MT65XX_USB3
 config PHY_HI6220_USB
 	tristate "hi6220 USB PHY support"
 	depends on (ARCH_HISI && ARM64) || COMPILE_TEST
+	depends on HAS_IOMEM	# For MFD_SYSCON
 	select GENERIC_PHY
 	select MFD_SYSCON
 	help
-- 
2.5.0

[RFC 06/15] pinctrl: rockchip: Add missing MFD_SYSCON dependency on HAS_IOMEM

[Krzysztof Kozlowski]

The MFD_SYSCON depends on HAS_IOMEM so when selecting it avoid unmet
direct dependencies.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
 drivers/pinctrl/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index fb8200b8e8ec..dc7ab58d4d74 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -131,6 +131,7 @@ config PINCTRL_MESON
 
 config PINCTRL_ROCKCHIP
 	bool
+	depends on HAS_IOMEM	# For MFD_SYSCON
 	select PINMUX
 	select GENERIC_PINCONF
 	select GENERIC_IRQ_CHIP
-- 
2.5.0

Re: [rtc-linux] [RFC 06/15] pinctrl: rockchip: Add missing MFD_SYSCON dependency on HAS_IOMEM

[Krzysztof Kozlowski]

2016-03-03 17:03 GMT+09:00 Krzysztof Kozlowski <k.kozlowski@samsung.com>:
> The MFD_SYSCON depends on HAS_IOMEM so when selecting it avoid unmet
> direct dependencies.
>
> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> ---
>  drivers/pinctrl/Kconfig | 1 +
>  1 file changed, 1 insertion(+)
>
> diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
> index fb8200b8e8ec..dc7ab58d4d74 100644
> --- a/drivers/pinctrl/Kconfig
> +++ b/drivers/pinctrl/Kconfig
> @@ -131,6 +131,7 @@ config PINCTRL_MESON
>
>  config PINCTRL_ROCKCHIP
>         bool
> +       depends on HAS_IOMEM    # For MFD_SYSCON
>         select PINMUX

False alarm, no need for the patch (non-selectable symbol)

Best regards,
Krzysztof

[RFC 07/15] pinctrl: mvebu: Add missing MFD_SYSCON dependency on HAS_IOMEM

[Krzysztof Kozlowski]

The MFD_SYSCON depends on HAS_IOMEM so when selecting it avoid unmet
direct dependencies.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
 drivers/pinctrl/mvebu/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/pinctrl/mvebu/Kconfig b/drivers/pinctrl/mvebu/Kconfig
index 170602407c0d..13685923729c 100644
--- a/drivers/pinctrl/mvebu/Kconfig
+++ b/drivers/pinctrl/mvebu/Kconfig
@@ -7,6 +7,7 @@ config PINCTRL_MVEBU
 
 config PINCTRL_DOVE
 	bool
+	depends on HAS_IOMEM	# For MFD_SYSCON
 	select PINCTRL_MVEBU
 	select MFD_SYSCON
 
-- 
2.5.0

[RFC 08/15] rtc: at91sam9: Add missing MFD_SYSCON dependency on HAS_IOMEM

[Krzysztof Kozlowski]

The MFD_SYSCON depends on HAS_IOMEM so when selecting it avoid unmet
direct dependencies.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
 drivers/rtc/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 0da40e2e4280..5c530b6b125d 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -1302,6 +1302,7 @@ config RTC_DRV_AT91RM9200
 config RTC_DRV_AT91SAM9
 	tristate "AT91SAM9 RTT as RTC"
 	depends on ARCH_AT91 || COMPILE_TEST
+	depends on HAS_IOMEM	# For MFD_SYSCON
 	select MFD_SYSCON
 	help
 	  Some AT91SAM9 SoCs provide an RTT (Real Time Timer) block which
-- 
2.5.0

[RFC 09/15] media: platform: Add missing MFD_SYSCON dependency on HAS_IOMEM

[Krzysztof Kozlowski]

The MFD_SYSCON depends on HAS_IOMEM so when selecting it avoid unmet
direct dependencies.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
 drivers/media/platform/Kconfig            | 1 +
 drivers/media/platform/exynos4-is/Kconfig | 1 +
 2 files changed, 2 insertions(+)

diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig
index 201f5c296a95..e5931e434fa2 100644
--- a/drivers/media/platform/Kconfig
+++ b/drivers/media/platform/Kconfig
@@ -79,6 +79,7 @@ config VIDEO_OMAP3
 	depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API && ARCH_OMAP3
 	depends on HAS_DMA && OF
 	depends on OMAP_IOMMU
+	depends on HAS_IOMEM	# For MFD_SYSCON
 	select ARM_DMA_USE_IOMMU
 	select VIDEOBUF2_DMA_CONTIG
 	select MFD_SYSCON
diff --git a/drivers/media/platform/exynos4-is/Kconfig b/drivers/media/platform/exynos4-is/Kconfig
index 57d42c6172c5..c4317b99d257 100644
--- a/drivers/media/platform/exynos4-is/Kconfig
+++ b/drivers/media/platform/exynos4-is/Kconfig
@@ -17,6 +17,7 @@ config VIDEO_S5P_FIMC
 	tristate "S5P/EXYNOS4 FIMC/CAMIF camera interface driver"
 	depends on I2C
 	depends on HAS_DMA
+	depends on HAS_IOMEM	# For MFD_SYSCON
 	select VIDEOBUF2_DMA_CONTIG
 	select V4L2_MEM2MEM_DEV
 	select MFD_SYSCON
-- 
2.5.0

[RFC 10/15] net: ethernet: Add missing MFD_SYSCON dependency on HAS_IOMEM

[Krzysztof Kozlowski]

The MFD_SYSCON depends on HAS_IOMEM so when selecting it avoid unmet
direct dependencies.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
 drivers/net/ethernet/hisilicon/Kconfig      | 1 +
 drivers/net/ethernet/stmicro/stmmac/Kconfig | 6 ++++++
 drivers/net/ethernet/ti/Kconfig             | 1 +
 3 files changed, 8 insertions(+)

diff --git a/drivers/net/ethernet/hisilicon/Kconfig b/drivers/net/ethernet/hisilicon/Kconfig
index 74beb1867230..6a9c91781bf9 100644
--- a/drivers/net/ethernet/hisilicon/Kconfig
+++ b/drivers/net/ethernet/hisilicon/Kconfig
@@ -26,6 +26,7 @@ config HIX5HD2_GMAC
 config HIP04_ETH
 	tristate "HISILICON P04 Ethernet support"
 	select MARVELL_PHY
+	depends on HAS_IOMEM	# For MFD_SYSCON
 	select MFD_SYSCON
 	select HNS_MDIO
 	---help---
diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig
index cec147d1d34f..d6902bf6e90f 100644
--- a/drivers/net/ethernet/stmicro/stmmac/Kconfig
+++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig
@@ -16,6 +16,7 @@ if STMMAC_ETH
 config STMMAC_PLATFORM
 	tristate "STMMAC Platform bus support"
 	depends on STMMAC_ETH
+	depends on HAS_IOMEM	# For MFD_SYSCON
 	select MFD_SYSCON
 	default y
 	---help---
@@ -41,6 +42,7 @@ config DWMAC_IPQ806X
 	tristate "QCA IPQ806x DWMAC support"
 	default ARCH_QCOM
 	depends on OF
+	depends on HAS_IOMEM	# For MFD_SYSCON
 	select MFD_SYSCON
 	help
 	  Support for QCA IPQ806X DWMAC Ethernet.
@@ -54,6 +56,7 @@ config DWMAC_LPC18XX
 	tristate "NXP LPC18xx/43xx DWMAC support"
 	default ARCH_LPC18XX
 	depends on OF
+	depends on HAS_IOMEM	# For MFD_SYSCON
 	select MFD_SYSCON
 	---help---
 	  Support for NXP LPC18xx/43xx DWMAC Ethernet.
@@ -73,6 +76,7 @@ config DWMAC_ROCKCHIP
 	tristate "Rockchip dwmac support"
 	default ARCH_ROCKCHIP
 	depends on OF
+	depends on HAS_IOMEM	# For MFD_SYSCON
 	select MFD_SYSCON
 	help
 	  Support for Ethernet controller on Rockchip RK3288 SoC.
@@ -84,6 +88,7 @@ config DWMAC_SOCFPGA
 	tristate "SOCFPGA dwmac support"
 	default ARCH_SOCFPGA
 	depends on OF
+	depends on HAS_IOMEM	# For MFD_SYSCON
 	select MFD_SYSCON
 	help
 	  Support for ethernet controller on Altera SOCFPGA
@@ -96,6 +101,7 @@ config DWMAC_STI
 	tristate "STi GMAC support"
 	default ARCH_STI
 	depends on OF
+	depends on HAS_IOMEM	# For MFD_SYSCON
 	select MFD_SYSCON
 	---help---
 	  Support for ethernet controller on STi SOCs.
diff --git a/drivers/net/ethernet/ti/Kconfig b/drivers/net/ethernet/ti/Kconfig
index e7f0b7d95b65..ec56cebe929d 100644
--- a/drivers/net/ethernet/ti/Kconfig
+++ b/drivers/net/ethernet/ti/Kconfig
@@ -62,6 +62,7 @@ config TI_CPSW_ALE
 config TI_CPSW
 	tristate "TI CPSW Switch Support"
 	depends on ARCH_DAVINCI || ARCH_OMAP2PLUS
+	depends on HAS_IOMEM	# For MFD_SYSCON
 	select TI_DAVINCI_CPDMA
 	select TI_DAVINCI_MDIO
 	select TI_CPSW_PHY_SEL
-- 
2.5.0

[RFC 11/15] power: reset: keystone: Add missing MFD_SYSCON dependency on HAS_IOMEM

[Krzysztof Kozlowski]

The MFD_SYSCON depends on HAS_IOMEM so when selecting it avoid unmet
direct dependencies.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
 drivers/power/reset/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
index 0a6408a39c66..0f34846ae80d 100644
--- a/drivers/power/reset/Kconfig
+++ b/drivers/power/reset/Kconfig
@@ -141,6 +141,7 @@ config POWER_RESET_XGENE
 config POWER_RESET_KEYSTONE
 	bool "Keystone reset driver"
 	depends on ARCH_KEYSTONE
+	depends on HAS_IOMEM	# For MFD_SYSCON
 	select MFD_SYSCON
 	help
 	  Reboot support for the KEYSTONE SoCs.
-- 
2.5.0

[RFC 12/15] soc: qcom: Add missing MFD_SYSCON dependency on HAS_IOMEM

[Krzysztof Kozlowski]

The MFD_SYSCON depends on HAS_IOMEM so when selecting it avoid unmet
direct dependencies.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
 drivers/soc/qcom/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
index 461b387d03cc..24de48134c15 100644
--- a/drivers/soc/qcom/Kconfig
+++ b/drivers/soc/qcom/Kconfig
@@ -4,6 +4,7 @@
 config QCOM_GSBI
         tristate "QCOM General Serial Bus Interface"
         depends on ARCH_QCOM
+        depends on HAS_IOMEM	# For MFD_SYSCON
         select MFD_SYSCON
         help
           Say y here to enable GSBI support.  The GSBI provides control
-- 
2.5.0

[RFC 13/15] staging: media: omap4iss: Add missing MFD_SYSCON dependency on HAS_IOMEM

[Krzysztof Kozlowski]

The MFD_SYSCON depends on HAS_IOMEM so when selecting it avoid unmet
direct dependencies.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
 drivers/staging/media/omap4iss/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/staging/media/omap4iss/Kconfig b/drivers/staging/media/omap4iss/Kconfig
index 46183464ee79..7dea072172aa 100644
--- a/drivers/staging/media/omap4iss/Kconfig
+++ b/drivers/staging/media/omap4iss/Kconfig
@@ -2,6 +2,7 @@ config VIDEO_OMAP4
 	tristate "OMAP 4 Camera support"
 	depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API && I2C && ARCH_OMAP4
 	depends on HAS_DMA
+	depends on HAS_IOMEM	# For MFD_SYSCON
 	select MFD_SYSCON
 	select VIDEOBUF2_DMA_CONTIG
 	---help---
-- 
2.5.0

[RFC 14/15] usb: xhci: mtk: Add missing MFD_SYSCON dependency on HAS_IOMEM

[Krzysztof Kozlowski]

The MFD_SYSCON depends on HAS_IOMEM so when selecting it avoid unmet
direct dependencies.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
 drivers/usb/host/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 8c20ebbc049c..f759a778d606 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -45,6 +45,7 @@ config USB_XHCI_PLATFORM
 
 config USB_XHCI_MTK
 	tristate "xHCI support for Mediatek MT65xx"
+	depends on HAS_IOMEM	# For MFD_SYSCON
 	select MFD_SYSCON
 	depends on ARCH_MEDIATEK || COMPILE_TEST
 	---help---
-- 
2.5.0

[RFC 15/15] mfd: syscon: Fix build of missing ioremap on UM

[Krzysztof Kozlowski]

Since commit c89c0114955a ("mfd: syscon: Set regmap max_register in
of_syscon_register") the syscon uses ioremap so it fails on COMPILE_TEST
without HAS_IOMEM:

drivers/mfd/syscon.c: In function ‘of_syscon_register’:
drivers/mfd/syscon.c:67:9: error: implicit declaration of function ‘ioremap’ [-Werror=implicit-function-declaration]
  base = ioremap(res.start, resource_size(&res));
         ^
drivers/mfd/syscon.c:67:7: warning: assignment makes pointer from integer without a cast [-Wint-conversion]
  base = ioremap(res.start, resource_size(&res));
       ^
drivers/mfd/syscon.c:109:2: error: implicit declaration of function ‘iounmap’ [-Werror=implicit-function-declaration]
  iounmap(base);

When selecting MFD_SYSCON, depend on HAS_IOMEM to avoid unmet direct
dependencies.

Reported-by: kbuild test robot <lkp@intel.com>
Fixes: c89c0114955a ("mfd: syscon: Set regmap max_register in of_syscon_register")
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
 drivers/mfd/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index aa21dc55eb15..2e5b1e525a1d 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -1034,6 +1034,7 @@ config MFD_SUN6I_PRCM
 
 config MFD_SYSCON
 	bool "System Controller Register R/W Based on Regmap"
+	depends on HAS_IOMEM
 	select REGMAP_MMIO
 	help
 	  Select this option to enable accessing system control registers
-- 
2.5.0

--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [RFC 15/15] mfd: syscon: Fix build of missing ioremap on UM

[Arnd Bergmann]

On Thursday 03 March 2016 17:03:41 Krzysztof Kozlowski wrote:
> Since commit c89c0114955a ("mfd: syscon: Set regmap max_register in
> of_syscon_register") the syscon uses ioremap so it fails on COMPILE_TEST
> without HAS_IOMEM:
> 
> drivers/mfd/syscon.c: In function ‘of_syscon_register’:
> drivers/mfd/syscon.c:67:9: error: implicit declaration of function ‘ioremap’ [-Werror=implicit-function-declaration]
>   base = ioremap(res.start, resource_size(&res));
>          ^
> drivers/mfd/syscon.c:67:7: warning: assignment makes pointer from integer without a cast [-Wint-conversion]
>   base = ioremap(res.start, resource_size(&res));
>        ^
> drivers/mfd/syscon.c:109:2: error: implicit declaration of function ‘iounmap’ [-Werror=implicit-function-declaration]
>   iounmap(base);
> 
> When selecting MFD_SYSCON, depend on HAS_IOMEM to avoid unmet direct
> dependencies.
> 
> Reported-by: kbuild test robot <lkp@intel.com>
> Fixes: c89c0114955a ("mfd: syscon: Set regmap max_register in of_syscon_register")
> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> ---

Thanks for looking into this, the patches all look right to me, but
I fear we are forever playing catch-up here, as the number of syscon users
is only growing, and it's not obvious to the average driver developer
why they have to select this symbol.

Interestingly, when I try to build an allmodconfig kernel for UML,
it seems to reject any driver calling ioremap/iounmap but not
the wrapper functions around that (of_iomap, devm_ioremap,
devm_ioremap_resource, ...) or the actual accessors that make no
sense without ioremap (readl, writel, inb, outb, iowrite32, ...).

I've played with this a bit, and arrived at the patch below, is this
something we want as well?

	Arnd

> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index aa21dc55eb15..2e5b1e525a1d 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -1034,6 +1034,7 @@ config MFD_SUN6I_PRCM
>  
>  config MFD_SYSCON
>  	bool "System Controller Register R/W Based on Regmap"
> +	depends on HAS_IOMEM
>  	select REGMAP_MMIO
>  	help
>  	  Select this option to enable accessing system control registers
> 


 arch/um/include/asm/io.h           |    1 +
 drivers/char/Kconfig               |    3 +++
 drivers/char/mem.c                 |   16 ++++++++++++++++
 drivers/clocksource/Kconfig        |    3 +++
 drivers/fmc/Kconfig                |    1 +
 drivers/fpga/Kconfig               |    1 +
 drivers/hwtracing/intel_th/Kconfig |    1 +
 drivers/mfd/Kconfig                |    1 +
 drivers/misc/altera-stapl/Kconfig  |    2 +-
 drivers/mtd/chips/Kconfig          |    4 ++++
 drivers/mtd/lpddr/Kconfig          |    1 +
 drivers/mtd/maps/Kconfig           |    3 ++-
 drivers/mtd/nand/Kconfig           |    2 +-
 drivers/mtd/spi-nor/Kconfig        |    1 +
 drivers/net/can/Kconfig            |    1 +
 drivers/net/hamradio/Kconfig       |    9 ++++++---
 drivers/nvmem/Kconfig              |    1 +
 drivers/phy/Kconfig                |    9 +++++++--
 drivers/power/reset/Kconfig        |    4 +++-
 drivers/staging/comedi/Kconfig     |    6 +++++-
 drivers/thermal/Kconfig            |   11 +++++++++--
 include/linux/irq.h                |    2 ++
 include/linux/mtd/cfi.h            |    2 ++
 include/linux/mtd/map.h            |    2 ++
 kernel/resource.c                  |    2 ++
 lib/Kconfig                        |    7 ++++++-
 mm/bootmem.c                       |    4 ++--
 27 files changed, 85 insertions(+), 15 deletions(-)

diff --git a/arch/um/include/asm/io.h b/arch/um/include/asm/io.h
new file mode 100644
index 0000000..618ff13
--- /dev/null
+++ b/arch/um/include/asm/io.h
@@ -0,0 +1 @@
+/* no IOPORT or IOMEM suport */
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index a043107..f6dc17a 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -8,6 +8,7 @@ source "drivers/tty/Kconfig"
 
 config DEVMEM
 	bool "/dev/mem virtual device support"
+	depends on HAS_IOMEM
 	default y
 	help
 	  Say Y here if you want to support the /dev/mem device.
@@ -17,6 +18,7 @@ config DEVMEM
 
 config DEVKMEM
 	bool "/dev/kmem virtual device support"
+	depends on HAS_IOMEM
 	default y
 	help
 	  Say Y here if you want to support the /dev/kmem device. The
@@ -94,6 +96,7 @@ config BFIN_OTP_WRITE_ENABLE
 config PRINTER
 	tristate "Parallel printer support"
 	depends on PARPORT
+	depends on HAS_IOPORT
 	---help---
 	  If you intend to attach a printer to the parallel port of your Linux
 	  box (as opposed to using a serial printer; if the connector at the
diff --git a/drivers/char/mem.c b/drivers/char/mem.c
index 4f6f94c..eedd129 100644
--- a/drivers/char/mem.c
+++ b/drivers/char/mem.c
@@ -91,6 +91,7 @@ void __weak unxlate_dev_mem_ptr(phys_addr_t phys, void *addr)
 }
 #endif
 
+#ifdef CONFIG_DEVMEM
 /*
  * This funcion reads the *physical* memory. The f_pos points directly to the
  * memory location.
@@ -219,6 +220,7 @@ static ssize_t write_mem(struct file *file, const char __user *buf,
 	*ppos += written;
 	return written;
 }
+#endif
 
 int __weak phys_mem_access_prot_allowed(struct file *file,
 	unsigned long pfn, unsigned long size, pgprot_t *vma_prot)
@@ -312,6 +314,7 @@ static inline int private_mapping_ok(struct vm_area_struct *vma)
 }
 #endif
 
+#ifdef CONFIG_DEVMEM
 static const struct vm_operations_struct mmap_mem_ops = {
 #ifdef CONFIG_HAVE_IOREMAP_PROT
 	.access = generic_access_phys
@@ -351,7 +354,9 @@ static int mmap_mem(struct file *file, struct vm_area_struct *vma)
 	}
 	return 0;
 }
+#endif
 
+#ifdef CONFIG_DEVKMEM
 static int mmap_kmem(struct file *file, struct vm_area_struct *vma)
 {
 	unsigned long pfn;
@@ -552,7 +557,9 @@ static ssize_t write_kmem(struct file *file, const char __user *buf,
 	*ppos = p;
 	return virtr + wrote ? : err;
 }
+#endif
 
+#ifdef CONFIG_DEVPORT
 static ssize_t read_port(struct file *file, char __user *buf,
 			 size_t count, loff_t *ppos)
 {
@@ -594,6 +601,7 @@ static ssize_t write_port(struct file *file, const char __user *buf,
 	*ppos = i;
 	return tmp-buf;
 }
+#endif
 
 static ssize_t read_null(struct file *file, char __user *buf,
 			 size_t count, loff_t *ppos)
@@ -710,10 +718,12 @@ static loff_t memory_lseek(struct file *file, loff_t offset, int orig)
 	return ret;
 }
 
+#ifdef CONFIG_DEVPORT
 static int open_port(struct inode *inode, struct file *filp)
 {
 	return capable(CAP_SYS_RAWIO) ? 0 : -EPERM;
 }
+#endif
 
 #define zero_lseek	null_lseek
 #define full_lseek      null_lseek
@@ -722,6 +732,7 @@ static int open_port(struct inode *inode, struct file *filp)
 #define open_mem	open_port
 #define open_kmem	open_mem
 
+#ifdef CONFIG_DEVMEM
 static const struct file_operations __maybe_unused mem_fops = {
 	.llseek		= memory_lseek,
 	.read		= read_mem,
@@ -733,7 +744,9 @@ static const struct file_operations __maybe_unused mem_fops = {
 	.mmap_capabilities = memory_mmap_capabilities,
 #endif
 };
+#endif
 
+#ifdef CONFIG_DEVKMEM
 static const struct file_operations __maybe_unused kmem_fops = {
 	.llseek		= memory_lseek,
 	.read		= read_kmem,
@@ -745,6 +758,7 @@ static const struct file_operations __maybe_unused kmem_fops = {
 	.mmap_capabilities = memory_mmap_capabilities,
 #endif
 };
+#endif
 
 static const struct file_operations null_fops = {
 	.llseek		= null_lseek,
@@ -755,12 +769,14 @@ static const struct file_operations null_fops = {
 	.splice_write	= splice_write_null,
 };
 
+#ifdef CONFIG_DEVPORT
 static const struct file_operations __maybe_unused port_fops = {
 	.llseek		= memory_lseek,
 	.read		= read_port,
 	.write		= write_port,
 	.open		= open_port,
 };
+#endif
 
 static const struct file_operations zero_fops = {
 	.llseek		= zero_lseek,
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 33db740..6b58974 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -38,6 +38,7 @@ config DIGICOLOR_TIMER
 config DW_APB_TIMER
 	bool "DW APB timer driver" if COMPILE_TEST
 	depends on GENERIC_CLOCKEVENTS
+	depends on HAS_IOMEM
 	help
 	  Enables the support for the dw_apb timer.
 
@@ -64,6 +65,7 @@ config ARMADA_370_XP_TIMER
 config MESON6_TIMER
 	bool "Meson6 timer driver" if COMPILE_TEST
 	depends on GENERIC_CLOCKEVENTS
+	depends on HAS_IOMEM
 	select CLKSRC_MMIO
 	help
 	  Enables the support for the Meson6 timer driver.
@@ -114,6 +116,7 @@ config CADENCE_TTC_TIMER
 config ASM9260_TIMER
 	bool "ASM9260 timer driver" if COMPILE_TEST
 	depends on GENERIC_CLOCKEVENTS
+	depends on HAS_IOMEM
 	select CLKSRC_MMIO
 	select CLKSRC_OF
 	help
diff --git a/drivers/fmc/Kconfig b/drivers/fmc/Kconfig
index 3a75f42..adf1391 100644
--- a/drivers/fmc/Kconfig
+++ b/drivers/fmc/Kconfig
@@ -4,6 +4,7 @@
 
 menuconfig FMC
 	tristate "FMC support"
+	depends on HAS_IOMEM
 	help
 
 	  FMC (FPGA Mezzanine Carrier) is a mechanical and electrical
diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig
index c9b9fdf..36c54af 100644
--- a/drivers/fpga/Kconfig
+++ b/drivers/fpga/Kconfig
@@ -21,6 +21,7 @@ config FPGA_MGR_SOCFPGA
 
 config FPGA_MGR_ZYNQ_FPGA
 	tristate "Xilinx Zynq FPGA"
+	depends on HAS_IOMEM
 	help
 	  FPGA manager driver support for Xilinx Zynq FPGAs.
 
diff --git a/drivers/hwtracing/intel_th/Kconfig b/drivers/hwtracing/intel_th/Kconfig
index b7a9073..467dae9 100644
--- a/drivers/hwtracing/intel_th/Kconfig
+++ b/drivers/hwtracing/intel_th/Kconfig
@@ -1,5 +1,6 @@
 config INTEL_TH
 	tristate "Intel(R) Trace Hub controller"
+	depends on HAS_IOMEM
 	help
 	  Intel(R) Trace Hub (TH) is a set of hardware blocks (subdevices) that
 	  produce, switch and output trace data from multiple hardware and
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 9ca66de..6ff6246 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -999,6 +999,7 @@ config MFD_SUN6I_PRCM
 
 config MFD_SYSCON
 	bool "System Controller Register R/W Based on Regmap"
+	depends on HAS_IOMEM
 	select REGMAP_MMIO
 	help
 	  Select this option to enable accessing system control registers
diff --git a/drivers/misc/altera-stapl/Kconfig b/drivers/misc/altera-stapl/Kconfig
index 7f01d8e..c7e4c77 100644
--- a/drivers/misc/altera-stapl/Kconfig
+++ b/drivers/misc/altera-stapl/Kconfig
@@ -2,7 +2,7 @@ comment "Altera FPGA firmware download module"
 
 config ALTERA_STAPL
 	tristate "Altera FPGA firmware download module"
-	depends on I2C
+	depends on I2C && HAS_IOPORT
 	default n
 	help
 	  An Altera FPGA module. Say Y when you want to support this tool.
diff --git a/drivers/mtd/chips/Kconfig b/drivers/mtd/chips/Kconfig
index 3b3dabc..189ddce 100644
--- a/drivers/mtd/chips/Kconfig
+++ b/drivers/mtd/chips/Kconfig
@@ -3,6 +3,7 @@ menu "RAM/ROM/Flash chip drivers"
 
 config MTD_CFI
 	tristate "Detect flash chips by Common Flash Interface (CFI) probe"
+	depends on HAS_IOMEM
 	select MTD_GEN_PROBE
 	select MTD_CFI_UTIL
 	help
@@ -15,6 +16,7 @@ config MTD_CFI
 
 config MTD_JEDECPROBE
 	tristate "Detect non-CFI AMD/JEDEC-compatible flash chips"
+	depends on HAS_IOMEM
 	select MTD_GEN_PROBE
 	select MTD_CFI_UTIL
 	help
@@ -207,12 +209,14 @@ config MTD_CFI_UTIL
 
 config MTD_RAM
 	tristate "Support for RAM chips in bus mapping"
+	depends on HAS_IOMEM
 	help
 	  This option enables basic support for RAM chips accessed through
 	  a bus mapping driver.
 
 config MTD_ROM
 	tristate "Support for ROM chips in bus mapping"
+	depends on HAS_IOMEM
 	help
 	  This option enables basic support for ROM chips accessed through
 	  a bus mapping driver.
diff --git a/drivers/mtd/lpddr/Kconfig b/drivers/mtd/lpddr/Kconfig
index 3a19cbe..07dd95a 100644
--- a/drivers/mtd/lpddr/Kconfig
+++ b/drivers/mtd/lpddr/Kconfig
@@ -4,6 +4,7 @@ menu "LPDDR & LPDDR2 PCM memory drivers"
 config MTD_LPDDR
 	tristate "Support for LPDDR flash chips"
 	select MTD_QINFO_PROBE
+	depends on HAS_IOMEM
 	help
 	  This option enables support of LPDDR (Low power double data rate)
 	  flash chips. Synonymous with Mobile-DDR. It is a new standard for
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index 7c95a65..86a9604 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -3,7 +3,8 @@ menu "Mapping drivers for chip access"
 	depends on HAS_IOMEM
 
 config MTD_COMPLEX_MAPPINGS
-	bool "Support non-linear mappings of flash chips"
+	bool "Support non-linear mappings of flash chips" if HAS_IOMEM
+	default !HAS_IOMEM
 	help
 	  This causes the chip drivers to allow for complicated
 	  paged mappings of flash chips.
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 20f01b3..6ed3de7 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -12,7 +12,7 @@ config MTD_NAND_ECC_SMC
 
 menuconfig MTD_NAND
 	tristate "NAND Device Support"
-	depends on MTD
+	depends on MTD && HAS_IOMEM
 	select MTD_NAND_IDS
 	select MTD_NAND_ECC
 	help
diff --git a/drivers/mtd/spi-nor/Kconfig b/drivers/mtd/spi-nor/Kconfig
index 0dc9275..83befab 100644
--- a/drivers/mtd/spi-nor/Kconfig
+++ b/drivers/mtd/spi-nor/Kconfig
@@ -9,6 +9,7 @@ if MTD_SPI_NOR
 
 config MTD_MT81xx_NOR
 	tristate "Mediatek MT81xx SPI NOR flash controller"
+	depends on HAS_IOMEM
 	help
 	  This enables access to SPI NOR flash, using MT81xx SPI NOR flash
 	  controller. This controller does not support generic SPI BUS, it only
diff --git a/drivers/net/can/Kconfig b/drivers/net/can/Kconfig
index 6d04183..b1e268b 100644
--- a/drivers/net/can/Kconfig
+++ b/drivers/net/can/Kconfig
@@ -132,6 +132,7 @@ config CAN_RCAR
 config CAN_SUN4I
 	tristate "Allwinner A10 CAN controller"
 	depends on MACH_SUN4I || MACH_SUN7I || COMPILE_TEST
+	depends on HAS_IOMEM
 	---help---
 	  Say Y here if you want to use CAN controller found on Allwinner
 	  A10/A20 SoCs.
diff --git a/drivers/net/hamradio/Kconfig b/drivers/net/hamradio/Kconfig
index bf5e596..507f7a5 100644
--- a/drivers/net/hamradio/Kconfig
+++ b/drivers/net/hamradio/Kconfig
@@ -113,7 +113,8 @@ config SCC_TRXECHO
 
 config BAYCOM_SER_FDX
 	tristate "BAYCOM ser12 fullduplex driver for AX.25"
-	depends on AX25 && !S390
+	depends on AX25
+	depends on HAS_IOPORT
 	select CRC_CCITT
 	---help---
 	  This is one of two drivers for Baycom style simple amateur radio
@@ -133,7 +134,8 @@ config BAYCOM_SER_FDX
 
 config BAYCOM_SER_HDX
 	tristate "BAYCOM ser12 halfduplex driver for AX.25"
-	depends on AX25 && !S390
+	depends on AX25
+	depends on HAS_IOPORT
 	select CRC_CCITT
 	---help---
 	  This is one of two drivers for Baycom style simple amateur radio
@@ -181,7 +183,8 @@ config BAYCOM_EPP
 
 config YAM
 	tristate "YAM driver for AX.25"
-	depends on AX25 && !S390
+	depends on AX25
+	depends on HAS_IOPORT
 	help
 	  The YAM is a modem for packet radio which connects to the serial
 	  port and includes some of the functions of a Terminal Node
diff --git a/drivers/nvmem/Kconfig b/drivers/nvmem/Kconfig
index bc4ea58..6ef3d0a 100644
--- a/drivers/nvmem/Kconfig
+++ b/drivers/nvmem/Kconfig
@@ -1,6 +1,7 @@
 menuconfig NVMEM
 	tristate "NVMEM Support"
 	select REGMAP
+	depends on HAS_IOMEM
 	help
 	  Support for NVMEM(Non Volatile Memory) devices like EEPROM, EFUSES...
 
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index e7e117d..d2216df 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -30,9 +30,10 @@ config PHY_BERLIN_SATA
 	  Enable this to support the SATA PHY on Marvell Berlin SoCs.
 
 config ARMADA375_USBCLUSTER_PHY
-	def_bool y
-	depends on MACH_ARMADA_375 || COMPILE_TEST
+	bool "ARMADA 375 USB cluster PHY driver" if COMPILE_TEST && !MACH_ARMADA_375
+	def_bool MACH_ARMADA_375
 	depends on OF
+	depends on HAS_IOMEM
 	select GENERIC_PHY
 
 config PHY_DM816X_USB
@@ -128,6 +129,7 @@ config PHY_RCAR_GEN3_USB2
 config OMAP_CONTROL_PHY
 	tristate "OMAP CONTROL PHY Driver"
 	depends on ARCH_OMAP2PLUS || COMPILE_TEST
+	depends on HAS_IOMEM
 	help
 	  Enable this to add support for the PHY part present in the control
 	  module. This driver has API to power on the USB2 PHY and to write to
@@ -224,6 +226,8 @@ config PHY_MT65XX_USB3
 
 config PHY_HI6220_USB
 	tristate "hi6220 USB PHY support"
+	depends on ARM64 || COMPILE_TEST
+	depends on HAS_IOMEM
 	select GENERIC_PHY
 	select MFD_SYSCON
 	help
@@ -401,6 +405,7 @@ config PHY_CYGNUS_PCIE
 	tristate "Broadcom Cygnus PCIe PHY driver"
 	depends on OF && (ARCH_BCM_CYGNUS || COMPILE_TEST)
 	select GENERIC_PHY
+	depends on HAS_IOMEM
 	default ARCH_BCM_CYGNUS
 	help
 	  Enable this to support the Broadcom Cygnus PCIe PHY.
diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
index 1131cf7..bb5bd1b 100644
--- a/drivers/power/reset/Kconfig
+++ b/drivers/power/reset/Kconfig
@@ -41,7 +41,7 @@ config POWER_RESET_AXXIA
 config POWER_RESET_BRCMSTB
 	bool "Broadcom STB reset driver"
 	depends on ARM || MIPS || COMPILE_TEST
-	depends on MFD_SYSCON
+	depends on MFD_SYSCON && HAS_IOMEM
 	default ARCH_BRCMSTB
 	help
 	  This driver provides restart support for Broadcom STB boards.
@@ -148,6 +148,7 @@ config POWER_RESET_KEYSTONE
 config POWER_RESET_SYSCON
 	bool "Generic SYSCON regmap reset driver"
 	depends on OF
+	depends on HAS_IOMEM
 	select MFD_SYSCON
 	help
 	  Reboot support for generic SYSCON mapped register reset.
@@ -155,6 +156,7 @@ config POWER_RESET_SYSCON
 config POWER_RESET_SYSCON_POWEROFF
 	bool "Generic SYSCON regmap poweroff driver"
 	depends on OF
+	depends on HAS_IOMEM
 	select MFD_SYSCON
 	help
 	  Poweroff support for generic SYSCON mapped register poweroff.
diff --git a/drivers/staging/comedi/Kconfig b/drivers/staging/comedi/Kconfig
index e7255f8..e1ba4aa 100644
--- a/drivers/staging/comedi/Kconfig
+++ b/drivers/staging/comedi/Kconfig
@@ -67,6 +67,7 @@ config COMEDI_TEST
 
 config COMEDI_PARPORT
 	tristate "Parallel port support"
+	depends on HAS_IOPORT
 	---help---
 	  Enable support for the standard parallel port.
 	  A cheap and easy way to get a few more digital I/O lines. Steal
@@ -87,6 +88,7 @@ config COMEDI_SERIAL2002
 config COMEDI_SSV_DNP
 	tristate "SSV Embedded Systems DIL/Net-PC support"
 	depends on X86_32 || COMPILE_TEST
+	depends on HAS_IOPORT
 	---help---
 	  Enable support for SSV Embedded Systems DIL/Net-PC
 
@@ -97,6 +99,7 @@ endif # COMEDI_MISC_DRIVERS
 
 menuconfig COMEDI_ISA_DRIVERS
 	bool "Comedi ISA and PC/104 drivers"
+	depends on HAS_IOPORT
 	---help---
 	  Enable comedi ISA and PC/104 drivers to be built
 
@@ -1110,7 +1113,7 @@ endif # COMEDI_PCI_DRIVERS
 
 menuconfig COMEDI_PCMCIA_DRIVERS
 	tristate "Comedi PCMCIA drivers"
-	depends on PCMCIA
+	depends on PCMCIA && HAS_IOPORT
 	---help---
 	  Enable support for comedi PCMCIA drivers.
 
@@ -1262,6 +1265,7 @@ config COMEDI_8255
 config COMEDI_8255_SA
 	tristate "Standalone 8255 support"
 	select COMEDI_8255
+	depends on HAS_IOPORT
 	---help---
 	  Enable support for 8255 digital I/O as a standalone driver.
 
diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index 8cc4ac6..31ae027 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -178,6 +178,7 @@ config THERMAL_EMULATION
 config HISI_THERMAL
 	tristate "Hisilicon thermal driver"
 	depends on (ARCH_HISI && CPU_THERMAL && OF) || COMPILE_TEST
+	depends on HAS_IOMEM
 	help
 	  Enable this to plug hisilicon's thermal sensor driver into the Linux
 	  thermal framework. cpufreq is used as the cooling device to throttle
@@ -198,6 +199,7 @@ config SPEAR_THERMAL
 	bool "SPEAr thermal sensor driver"
 	depends on PLAT_SPEAR || COMPILE_TEST
 	depends on OF
+	depends on HAS_IOMEM
 	help
 	  Enable this to plug the SPEAr thermal sensor driver into the Linux
 	  thermal framework.
@@ -206,6 +208,7 @@ config ROCKCHIP_THERMAL
 	tristate "Rockchip thermal driver"
 	depends on ARCH_ROCKCHIP || COMPILE_TEST
 	depends on RESET_CONTROLLER
+	depends on HAS_IOMEM
 	help
 	  Rockchip thermal driver provides support for Temperature sensor
 	  ADC (TS-ADC) found on Rockchip SoCs. It supports one critical
@@ -216,6 +219,7 @@ config RCAR_THERMAL
 	tristate "Renesas R-Car thermal driver"
 	depends on ARCH_SHMOBILE || COMPILE_TEST
 	depends on HAS_IOMEM
+	depends on HAS_IOMEM
 	help
 	  Enable this to plug the R-Car thermal sensor driver into the Linux
 	  thermal framework.
@@ -223,6 +227,7 @@ config RCAR_THERMAL
 config KIRKWOOD_THERMAL
 	tristate "Temperature sensor on Marvell Kirkwood SoCs"
 	depends on MACH_KIRKWOOD || COMPILE_TEST
+	depends on HAS_IOMEM
 	depends on OF
 	help
 	  Support for the Kirkwood thermal sensor driver into the Linux thermal
@@ -231,6 +236,7 @@ config KIRKWOOD_THERMAL
 config DOVE_THERMAL
 	tristate "Temperature sensor on Marvell Dove SoCs"
 	depends on ARCH_DOVE || MACH_DOVE || COMPILE_TEST
+	depends on HAS_IOMEM
 	depends on OF
 	help
 	  Support for the Dove thermal sensor driver in the Linux thermal
@@ -249,6 +255,7 @@ config DB8500_THERMAL
 config ARMADA_THERMAL
 	tristate "Armada 370/XP thermal management"
 	depends on ARCH_MVEBU || COMPILE_TEST
+	depends on HAS_IOMEM
 	depends on OF
 	help
 	  Enable this option if you want to have support for thermal management
@@ -366,12 +373,12 @@ config INTEL_PCH_THERMAL
 	  programmable trip points and other information.
 
 menu "Texas Instruments thermal drivers"
-depends on ARCH_HAS_BANDGAP || COMPILE_TEST
+depends on ARCH_HAS_BANDGAP || (COMPILE_TEST && HAS_IOMEM)
 source "drivers/thermal/ti-soc-thermal/Kconfig"
 endmenu
 
 menu "Samsung thermal drivers"
-depends on ARCH_EXYNOS || COMPILE_TEST
+depends on ARCH_EXYNOS || (COMPILE_TEST && HAS_IOMEM)
 source "drivers/thermal/samsung/Kconfig"
 endmenu
 
diff --git a/include/linux/irq.h b/include/linux/irq.h
index 3c1c967..a5d0f12 100644
--- a/include/linux/irq.h
+++ b/include/linux/irq.h
@@ -916,6 +916,7 @@ static inline void irq_gc_lock(struct irq_chip_generic *gc) { }
 static inline void irq_gc_unlock(struct irq_chip_generic *gc) { }
 #endif
 
+#ifdef CONFIG_HAS_IOMEM
 static inline void irq_reg_writel(struct irq_chip_generic *gc,
 				  u32 val, int reg_offset)
 {
@@ -933,5 +934,6 @@ static inline u32 irq_reg_readl(struct irq_chip_generic *gc,
 	else
 		return readl(gc->reg_base + reg_offset);
 }
+#endif
 
 #endif /* _LINUX_IRQ_H */
diff --git a/include/linux/mtd/cfi.h b/include/linux/mtd/cfi.h
index 9b57a9b..d5db153 100644
--- a/include/linux/mtd/cfi.h
+++ b/include/linux/mtd/cfi.h
@@ -310,6 +310,7 @@ uint32_t cfi_send_gen_cmd(u_char cmd, uint32_t cmd_addr, uint32_t base,
 				struct map_info *map, struct cfi_private *cfi,
 				int type, map_word *prev_val);
 
+#ifdef CONFIG_HAS_IOMEM
 static inline uint8_t cfi_read_query(struct map_info *map, uint32_t addr)
 {
 	map_word val = map_read(map, addr);
@@ -341,6 +342,7 @@ static inline uint16_t cfi_read_query16(struct map_info *map, uint32_t addr)
 		return cfi32_to_cpu(map, val.x[0]);
 	}
 }
+#endif
 
 void cfi_udelay(int us);
 
diff --git a/include/linux/mtd/map.h b/include/linux/mtd/map.h
index 58f3ba7..07c0d497 100644
--- a/include/linux/mtd/map.h
+++ b/include/linux/mtd/map.h
@@ -410,6 +410,7 @@ static inline map_word map_word_ff(struct map_info *map)
 	return r;
 }
 
+#ifdef CONFIG_HAS_IOMEM
 static inline map_word inline_map_read(struct map_info *map, unsigned long ofs)
 {
 	map_word r;
@@ -463,6 +464,7 @@ static inline void inline_map_copy_to(struct map_info *map, unsigned long to, co
 {
 	memcpy_toio(map->virt + to, from, len);
 }
+#endif
 
 #ifdef CONFIG_MTD_COMPLEX_MAPPINGS
 #define map_read(map, ofs) (map)->read(map, ofs)
diff --git a/kernel/resource.c b/kernel/resource.c
index 09c0597..efd5c9e 100644
--- a/kernel/resource.c
+++ b/kernel/resource.c
@@ -29,7 +29,9 @@
 struct resource ioport_resource = {
 	.name	= "PCI IO",
 	.start	= 0,
+#ifdef CONFIG_HAS_IOPORT
 	.end	= IO_SPACE_LIMIT,
+#endif
 	.flags	= IORESOURCE_IO,
 };
 EXPORT_SYMBOL(ioport_resource);
diff --git a/lib/Kconfig b/lib/Kconfig
index 133ebc0..38ff36d 100644
--- a/lib/Kconfig
+++ b/lib/Kconfig
@@ -382,9 +382,14 @@ config HAS_IOMEM
 	select GENERIC_IO
 	default y
 
+config HAS_IOPORT
+	bool
+	depends on HAS_IOMEM && !NO_IOPORT
+	default y
+
 config HAS_IOPORT_MAP
 	bool
-	depends on HAS_IOMEM && !NO_IOPORT_MAP
+	depends on HAS_IOMEM && HAS_IOPORT && !NO_IOPORT_MAP
 	default y
 
 config HAS_DMA
diff --git a/mm/bootmem.c b/mm/bootmem.c
index 91e32bc..3471237 100644
--- a/mm/bootmem.c
+++ b/mm/bootmem.c
@@ -99,7 +99,7 @@ static unsigned long __init init_bootmem_core(bootmem_data_t *bdata,
 	unsigned long mapsize;
 
 	mminit_validate_memmodel_limits(&start, &end);
-	bdata->node_bootmem_map = phys_to_virt(PFN_PHYS(mapstart));
+	bdata->node_bootmem_map = __va(PFN_PHYS(mapstart));
 	bdata->node_min_pfn = start;
 	bdata->node_low_pfn = end;
 	link_bootmem(bdata);
@@ -585,7 +585,7 @@ find_block:
 				PFN_UP(end_off), BOOTMEM_EXCLUSIVE))
 			BUG();
 
-		region = phys_to_virt(PFN_PHYS(bdata->node_min_pfn) +
+		region = __va(PFN_PHYS(bdata->node_min_pfn) +
 				start_off);
 		memset(region, 0, size);
 		/*





_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [rtc-linux] Re: [RFC 15/15] mfd: syscon: Fix build of missing ioremap on UM

[Krzysztof Kozlowski]

2016-03-03 19:50 GMT+09:00 Arnd Bergmann <arnd@arndb.de>:
> On Thursday 03 March 2016 17:03:41 Krzysztof Kozlowski wrote:
>> Since commit c89c0114955a ("mfd: syscon: Set regmap max_register in
>> of_syscon_register") the syscon uses ioremap so it fails on COMPILE_TEST
>> without HAS_IOMEM:
>>
>> drivers/mfd/syscon.c: In function ‘of_syscon_register’:
>> drivers/mfd/syscon.c:67:9: error: implicit declaration of function ‘ioremap’ [-Werror=implicit-function-declaration]
>>   base = ioremap(res.start, resource_size(&res));
>>          ^
>> drivers/mfd/syscon.c:67:7: warning: assignment makes pointer from integer without a cast [-Wint-conversion]
>>   base = ioremap(res.start, resource_size(&res));
>>        ^
>> drivers/mfd/syscon.c:109:2: error: implicit declaration of function ‘iounmap’ [-Werror=implicit-function-declaration]
>>   iounmap(base);
>>
>> When selecting MFD_SYSCON, depend on HAS_IOMEM to avoid unmet direct
>> dependencies.
>>
>> Reported-by: kbuild test robot <lkp@intel.com>
>> Fixes: c89c0114955a ("mfd: syscon: Set regmap max_register in of_syscon_register")
>> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
>> ---
>
> Thanks for looking into this, the patches all look right to me, but
> I fear we are forever playing catch-up here, as the number of syscon users
> is only growing, and it's not obvious to the average driver developer
> why they have to select this symbol.

Actually I screwed something because entire MFD menuconfig (including
MFD_SYSCON) is already guarded by if HAS_IOMEM.

I was fixing the problem from the end (the build error) and then hit
these unmet direct dependencies (mentioned this in other mail).

I think this patch 15/15 is not needed.

>
> Interestingly, when I try to build an allmodconfig kernel for UML,
> it seems to reject any driver calling ioremap/iounmap but not
> the wrapper functions around that (of_iomap, devm_ioremap,
> devm_ioremap_resource, ...)

The declaration of devm-like functions is always there. However it
should fail during linking stage (see my other patches like for
thermal, nvram etc. this is still in progress because I did not manage
to build allyesconfig on UML yet).

> or the actual accessors that make no
> sense without ioremap (readl, writel, inb, outb, iowrite32, ...).
>
> I've played with this a bit, and arrived at the patch below, is this
> something we want as well?
>
>         Arnd
>
>> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
>> index aa21dc55eb15..2e5b1e525a1d 100644
>> --- a/drivers/mfd/Kconfig
>> +++ b/drivers/mfd/Kconfig
>> @@ -1034,6 +1034,7 @@ config MFD_SUN6I_PRCM
>>
>>  config MFD_SYSCON
>>       bool "System Controller Register R/W Based on Regmap"
>> +     depends on HAS_IOMEM
>>       select REGMAP_MMIO
>>       help
>>         Select this option to enable accessing system control registers
>>
>
>
>  arch/um/include/asm/io.h           |    1 +
>  drivers/char/Kconfig               |    3 +++
>  drivers/char/mem.c                 |   16 ++++++++++++++++
>  drivers/clocksource/Kconfig        |    3 +++
>  drivers/fmc/Kconfig                |    1 +
>  drivers/fpga/Kconfig               |    1 +
>  drivers/hwtracing/intel_th/Kconfig |    1 +
>  drivers/mfd/Kconfig                |    1 +
>  drivers/misc/altera-stapl/Kconfig  |    2 +-
>  drivers/mtd/chips/Kconfig          |    4 ++++
>  drivers/mtd/lpddr/Kconfig          |    1 +
>  drivers/mtd/maps/Kconfig           |    3 ++-
>  drivers/mtd/nand/Kconfig           |    2 +-
>  drivers/mtd/spi-nor/Kconfig        |    1 +
>  drivers/net/can/Kconfig            |    1 +
>  drivers/net/hamradio/Kconfig       |    9 ++++++---
>  drivers/nvmem/Kconfig              |    1 +
>  drivers/phy/Kconfig                |    9 +++++++--
>  drivers/power/reset/Kconfig        |    4 +++-
>  drivers/staging/comedi/Kconfig     |    6 +++++-
>  drivers/thermal/Kconfig            |   11 +++++++++--

For some of these I already started fixing:
https://lkml.org/lkml/2016/3/3/147
http://comments.gmane.org/gmane.linux.kernel/2167664


>  include/linux/irq.h                |    2 ++
>  include/linux/mtd/cfi.h            |    2 ++
>  include/linux/mtd/map.h            |    2 ++
>  kernel/resource.c                  |    2 ++
>  lib/Kconfig                        |    7 ++++++-
>  mm/bootmem.c                       |    4 ++--
>  27 files changed, 85 insertions(+), 15 deletions(-)
>
> diff --git a/arch/um/include/asm/io.h b/arch/um/include/asm/io.h
> new file mode 100644
> index 0000000..618ff13
> --- /dev/null
> +++ b/arch/um/include/asm/io.h
> @@ -0,0 +1 @@
> +/* no IOPORT or IOMEM suport */
> diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
> index a043107..f6dc17a 100644
> --- a/drivers/char/Kconfig
> +++ b/drivers/char/Kconfig
> @@ -8,6 +8,7 @@ source "drivers/tty/Kconfig"
>
>  config DEVMEM
>         bool "/dev/mem virtual device support"
> +       depends on HAS_IOMEM
>         default y
>         help
>           Say Y here if you want to support the /dev/mem device.
> @@ -17,6 +18,7 @@ config DEVMEM
>
>  config DEVKMEM
>         bool "/dev/kmem virtual device support"
> +       depends on HAS_IOMEM
>         default y
>         help
>           Say Y here if you want to support the /dev/kmem device. The
> @@ -94,6 +96,7 @@ config BFIN_OTP_WRITE_ENABLE
>  config PRINTER
>         tristate "Parallel printer support"
>         depends on PARPORT
> +       depends on HAS_IOPORT
>         ---help---
>           If you intend to attach a printer to the parallel port of your Linux
>           box (as opposed to using a serial printer; if the connector at the
> diff --git a/drivers/char/mem.c b/drivers/char/mem.c
> index 4f6f94c..eedd129 100644
> --- a/drivers/char/mem.c
> +++ b/drivers/char/mem.c
> @@ -91,6 +91,7 @@ void __weak unxlate_dev_mem_ptr(phys_addr_t phys, void *addr)
>  }
>  #endif
>
> +#ifdef CONFIG_DEVMEM
>  /*
>   * This funcion reads the *physical* memory. The f_pos points directly to the
>   * memory location.
> @@ -219,6 +220,7 @@ static ssize_t write_mem(struct file *file, const char __user *buf,
>         *ppos += written;
>         return written;
>  }
> +#endif
>
>  int __weak phys_mem_access_prot_allowed(struct file *file,
>         unsigned long pfn, unsigned long size, pgprot_t *vma_prot)
> @@ -312,6 +314,7 @@ static inline int private_mapping_ok(struct vm_area_struct *vma)
>  }
>  #endif
>
> +#ifdef CONFIG_DEVMEM
>  static const struct vm_operations_struct mmap_mem_ops = {
>  #ifdef CONFIG_HAVE_IOREMAP_PROT
>         .access = generic_access_phys
> @@ -351,7 +354,9 @@ static int mmap_mem(struct file *file, struct vm_area_struct *vma)
>         }
>         return 0;
>  }
> +#endif
>
> +#ifdef CONFIG_DEVKMEM
>  static int mmap_kmem(struct file *file, struct vm_area_struct *vma)
>  {
>         unsigned long pfn;
> @@ -552,7 +557,9 @@ static ssize_t write_kmem(struct file *file, const char __user *buf,
>         *ppos = p;
>         return virtr + wrote ? : err;
>  }
> +#endif
>
> +#ifdef CONFIG_DEVPORT
>  static ssize_t read_port(struct file *file, char __user *buf,
>                          size_t count, loff_t *ppos)
>  {
> @@ -594,6 +601,7 @@ static ssize_t write_port(struct file *file, const char __user *buf,
>         *ppos = i;
>         return tmp-buf;
>  }
> +#endif
>
>  static ssize_t read_null(struct file *file, char __user *buf,
>                          size_t count, loff_t *ppos)
> @@ -710,10 +718,12 @@ static loff_t memory_lseek(struct file *file, loff_t offset, int orig)
>         return ret;
>  }
>
> +#ifdef CONFIG_DEVPORT
>  static int open_port(struct inode *inode, struct file *filp)
>  {
>         return capable(CAP_SYS_RAWIO) ? 0 : -EPERM;
>  }
> +#endif
>
>  #define zero_lseek     null_lseek
>  #define full_lseek      null_lseek
> @@ -722,6 +732,7 @@ static int open_port(struct inode *inode, struct file *filp)
>  #define open_mem       open_port
>  #define open_kmem      open_mem
>
> +#ifdef CONFIG_DEVMEM
>  static const struct file_operations __maybe_unused mem_fops = {
>         .llseek         = memory_lseek,
>         .read           = read_mem,
> @@ -733,7 +744,9 @@ static const struct file_operations __maybe_unused mem_fops = {
>         .mmap_capabilities = memory_mmap_capabilities,
>  #endif
>  };
> +#endif
>
> +#ifdef CONFIG_DEVKMEM
>  static const struct file_operations __maybe_unused kmem_fops = {
>         .llseek         = memory_lseek,
>         .read           = read_kmem,
> @@ -745,6 +758,7 @@ static const struct file_operations __maybe_unused kmem_fops = {
>         .mmap_capabilities = memory_mmap_capabilities,
>  #endif
>  };
> +#endif
>
>  static const struct file_operations null_fops = {
>         .llseek         = null_lseek,
> @@ -755,12 +769,14 @@ static const struct file_operations null_fops = {
>         .splice_write   = splice_write_null,
>  };
>
> +#ifdef CONFIG_DEVPORT
>  static const struct file_operations __maybe_unused port_fops = {
>         .llseek         = memory_lseek,
>         .read           = read_port,
>         .write          = write_port,
>         .open           = open_port,
>  };
> +#endif
>
>  static const struct file_operations zero_fops = {
>         .llseek         = zero_lseek,
> diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
> index 33db740..6b58974 100644
> --- a/drivers/clocksource/Kconfig
> +++ b/drivers/clocksource/Kconfig
> @@ -38,6 +38,7 @@ config DIGICOLOR_TIMER
>  config DW_APB_TIMER
>         bool "DW APB timer driver" if COMPILE_TEST
>         depends on GENERIC_CLOCKEVENTS
> +       depends on HAS_IOMEM
>         help
>           Enables the support for the dw_apb timer.
>
> @@ -64,6 +65,7 @@ config ARMADA_370_XP_TIMER
>  config MESON6_TIMER
>         bool "Meson6 timer driver" if COMPILE_TEST
>         depends on GENERIC_CLOCKEVENTS
> +       depends on HAS_IOMEM
>         select CLKSRC_MMIO
>         help
>           Enables the support for the Meson6 timer driver.
> @@ -114,6 +116,7 @@ config CADENCE_TTC_TIMER
>  config ASM9260_TIMER
>         bool "ASM9260 timer driver" if COMPILE_TEST
>         depends on GENERIC_CLOCKEVENTS
> +       depends on HAS_IOMEM
>         select CLKSRC_MMIO
>         select CLKSRC_OF
>         help
> diff --git a/drivers/fmc/Kconfig b/drivers/fmc/Kconfig
> index 3a75f42..adf1391 100644
> --- a/drivers/fmc/Kconfig
> +++ b/drivers/fmc/Kconfig
> @@ -4,6 +4,7 @@
>
>  menuconfig FMC
>         tristate "FMC support"
> +       depends on HAS_IOMEM
>         help
>
>           FMC (FPGA Mezzanine Carrier) is a mechanical and electrical
> diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig
> index c9b9fdf..36c54af 100644
> --- a/drivers/fpga/Kconfig
> +++ b/drivers/fpga/Kconfig
> @@ -21,6 +21,7 @@ config FPGA_MGR_SOCFPGA
>
>  config FPGA_MGR_ZYNQ_FPGA
>         tristate "Xilinx Zynq FPGA"
> +       depends on HAS_IOMEM
>         help
>           FPGA manager driver support for Xilinx Zynq FPGAs.
>
> diff --git a/drivers/hwtracing/intel_th/Kconfig b/drivers/hwtracing/intel_th/Kconfig
> index b7a9073..467dae9 100644
> --- a/drivers/hwtracing/intel_th/Kconfig
> +++ b/drivers/hwtracing/intel_th/Kconfig
> @@ -1,5 +1,6 @@
>  config INTEL_TH
>         tristate "Intel(R) Trace Hub controller"
> +       depends on HAS_IOMEM
>         help
>           Intel(R) Trace Hub (TH) is a set of hardware blocks (subdevices) that
>           produce, switch and output trace data from multiple hardware and
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index 9ca66de..6ff6246 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -999,6 +999,7 @@ config MFD_SUN6I_PRCM
>
>  config MFD_SYSCON
>         bool "System Controller Register R/W Based on Regmap"
> +       depends on HAS_IOMEM

This shouldn't be needed. There is if HAS_IOMEM at beginning.

Best regards,
Krzysztof
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

Re: [RFC 01/15] clocksource: atmel: Add missing MFD_SYSCON dependency on HAS_IOMEM

[Arnd Bergmann]

On Thursday 03 March 2016 17:03:27 Krzysztof Kozlowski wrote:
> 
> diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
> index c346be650892..5927944b46e0 100644
> --- a/drivers/clocksource/Kconfig
> +++ b/drivers/clocksource/Kconfig
> @@ -239,6 +239,7 @@ config ATMEL_PIT
>  
>  config ATMEL_ST
>         bool
> +       depends on HAS_IOMEM    # For MFD_SYSCON
>         select CLKSRC_OF
>         select MFD_SYSCON
> 

looking at this again, there is no need for the dependency here,
as it is not a user-selectable symbol.

	Arnd

Re: [RFC 02/15] dmaengine: nxp: Add missing MFD_SYSCON dependency on HAS_IOMEM

[Arnd Bergmann]

On Thursday 03 March 2016 17:03:28 Krzysztof Kozlowski wrote:
> index c77f214c9466..7fbf96bff280 100644
> --- a/drivers/dma/Kconfig
> +++ b/drivers/dma/Kconfig
> @@ -290,6 +290,7 @@ config LPC18XX_DMAMUX
>         bool "NXP LPC18xx/43xx DMA MUX for PL080"
>         depends on ARCH_LPC18XX || COMPILE_TEST
>         depends on OF && AMBA_PL08X
> +       depends on HAS_IOMEM    # For MFD_SYSCON
>         select MFD_SYSCON
>         help
> 

AMBA_PL08X implies HAS_IOMEM, so this is not needed explicitly

	Arnd

Re: [RFC 03/15] hwspinlock: qcom: Add missing MFD_SYSCON dependency on HAS_IOMEM

[Arnd Bergmann]

On Thursday 03 March 2016 17:03:29 Krzysztof Kozlowski wrote:
> diff --git a/drivers/hwspinlock/Kconfig b/drivers/hwspinlock/Kconfig
> index 73a401662853..5ab2d51dc147 100644
> --- a/drivers/hwspinlock/Kconfig
> +++ b/drivers/hwspinlock/Kconfig
> @@ -21,6 +21,7 @@ config HWSPINLOCK_OMAP
>  config HWSPINLOCK_QCOM
>         tristate "Qualcomm Hardware Spinlock device"
>         depends on ARCH_QCOM
> +       depends on HAS_IOMEM    # For MFD_SYSCON
>         select HWSPINLOCK
>         select MFD_SYSCON
>         help
> 

This is only needed if we add "|| COMPILE_TEST", right now the driver
is limited to ARCH_QCOM.

	Arnd

Re: [RFC 04/15] irqchip: st: Add missing MFD_SYSCON dependency on HAS_IOMEM

[Arnd Bergmann]

On Thursday 03 March 2016 17:03:30 Krzysztof Kozlowski wrote:
>  config ST_IRQCHIP
>         bool
>         select REGMAP
> +       depends on HAS_IOMEM    # For MFD_SYSCON
>         select MFD_SYSCON
>         help
>           Enables SysCfg Controlled IRQs on STi based platforms.
> 

Not user visible.

	Arnd

Re: [rtc-linux] Re: [RFC 04/15] irqchip: st: Add missing MFD_SYSCON dependency on HAS_IOMEM

[Krzysztof Kozlowski]

2016-03-03 19:53 GMT+09:00 Arnd Bergmann <arnd@arndb.de>:
> On Thursday 03 March 2016 17:03:30 Krzysztof Kozlowski wrote:
>>  config ST_IRQCHIP
>>         bool
>>         select REGMAP
>> +       depends on HAS_IOMEM    # For MFD_SYSCON
>>         select MFD_SYSCON
>>         help
>>           Enables SysCfg Controlled IRQs on STi based platforms.
>>
>
> Not user visible.

Hmmm... you are right (here and in other patches) but why am I getting
all these errors:
warning: (ST_IRQCHIP && HIP04_ETH && STMMAC_PLATFORM && DWMAC_IPQ806X
&& DWMAC_LPC18XX && DWMAC_ROCKCHIP && DWMAC_SOCFPGA && DWMAC_STI &&
TI_CPSW && PINCTRL_ROCKCHIP && PINCTRL_DOVE && POWER_RESET_KEYSTONE &&
S3C2410_WATCHDOG && VIDEO_OMAP3 && VIDEO_S5P_FIMC && USB_XHCI_MTK &&
RTC_DRV_AT91SAM9 && LPC18XX_DMAMUX && VIDEO_OMAP4 && HWSPINLOCK_QCOM
&& ATMEL_ST && QCOM_GSBI && PHY_HI6220_USB) selects MFD_SYSCON which
has unmet direct dependencies (HAS_IOMEM)
?
(ARCH=um, allyesconfig)
Adding depends here (and in other places) really helps... but it
should not have any impact...

Thanks for comments,
Krzysztof

Re: [rtc-linux] Re: [RFC 04/15] irqchip: st: Add missing MFD_SYSCON dependency on HAS_IOMEM

[Arnd Bergmann]

On Thursday 03 March 2016 21:00:57 Krzysztof Kozlowski wrote:
> >
> > Not user visible.
> 
> Hmmm... you are right (here and in other patches) but why am I getting
> all these errors:
> warning: (ST_IRQCHIP && HIP04_ETH && STMMAC_PLATFORM && DWMAC_IPQ806X
> && DWMAC_LPC18XX && DWMAC_ROCKCHIP && DWMAC_SOCFPGA && DWMAC_STI &&
> TI_CPSW && PINCTRL_ROCKCHIP && PINCTRL_DOVE && POWER_RESET_KEYSTONE &&
> S3C2410_WATCHDOG && VIDEO_OMAP3 && VIDEO_S5P_FIMC && USB_XHCI_MTK &&
> RTC_DRV_AT91SAM9 && LPC18XX_DMAMUX && VIDEO_OMAP4 && HWSPINLOCK_QCOM
> && ATMEL_ST && QCOM_GSBI && PHY_HI6220_USB) selects MFD_SYSCON which
> has unmet direct dependencies (HAS_IOMEM)
> ?
> (ARCH=um, allyesconfig)

The problem is that Kconfig will just print any option that
selects the one that has a missing dependency, but doesn't
show which of those are actually enabled.

> Adding depends here (and in other places) really helps... but it
> should not have any impact...

I think patch 5 by itself would have been sufficient.

	Arnd

Re: [rtc-linux] Re: [RFC 04/15] irqchip: st: Add missing MFD_SYSCON dependency on HAS_IOMEM

[Krzysztof Kozłowski]

2016-03-03 21:28 GMT+09:00 Arnd Bergmann <arnd@arndb.de>:
> On Thursday 03 March 2016 21:00:57 Krzysztof Kozlowski wrote:
>> >
>> > Not user visible.
>>
>> Hmmm... you are right (here and in other patches) but why am I getting
>> all these errors:
>> warning: (ST_IRQCHIP && HIP04_ETH && STMMAC_PLATFORM && DWMAC_IPQ806X
>> && DWMAC_LPC18XX && DWMAC_ROCKCHIP && DWMAC_SOCFPGA && DWMAC_STI &&
>> TI_CPSW && PINCTRL_ROCKCHIP && PINCTRL_DOVE && POWER_RESET_KEYSTONE &&
>> S3C2410_WATCHDOG && VIDEO_OMAP3 && VIDEO_S5P_FIMC && USB_XHCI_MTK &&
>> RTC_DRV_AT91SAM9 && LPC18XX_DMAMUX && VIDEO_OMAP4 && HWSPINLOCK_QCOM
>> && ATMEL_ST && QCOM_GSBI && PHY_HI6220_USB) selects MFD_SYSCON which
>> has unmet direct dependencies (HAS_IOMEM)
>> ?
>> (ARCH=um, allyesconfig)
>
> The problem is that Kconfig will just print any option that
> selects the one that has a missing dependency, but doesn't
> show which of those are actually enabled.

Indeed... but apparently putting direct HAS_IOMEM dependency on these
symbols silences the Kconfig warning.

>> Adding depends here (and in other places) really helps... but it
>> should not have any impact...
>
> I think patch 5 by itself would have been sufficient.

Thanks for analysis. Since all patches are independent (and IMHO the
last one is not needed really) so I won't resend the patchset. Instead
let maintainer pick what is meaningful.

Best regards,
Krzysztof

Re: [RFC 05/15] phy: hi6220: Add missing MFD_SYSCON dependency on HAS_IOMEM

[Arnd Bergmann]

On Thursday 03 March 2016 17:03:31 Krzysztof Kozlowski wrote:
> --- a/drivers/phy/Kconfig
> +++ b/drivers/phy/Kconfig
> @@ -225,6 +225,7 @@ config PHY_MT65XX_USB3
>  config PHY_HI6220_USB
>         tristate "hi6220 USB PHY support"
>         depends on (ARCH_HISI && ARM64) || COMPILE_TEST
> +       depends on HAS_IOMEM    # For MFD_SYSCON
>         select GENERIC_PHY
>         select MFD_SYSCON
>         help
> -- 
> 2.5.0
> 

This is indeed required, and seems to be what caused the problem
you saw in the first place.

	Arnd

Re: [RFC 08/15] rtc: at91sam9: Add missing MFD_SYSCON dependency on HAS_IOMEM

[Arnd Bergmann]

On Thursday 03 March 2016 17:03:34 Krzysztof Kozlowski wrote:
> index 0da40e2e4280..5c530b6b125d 100644
> --- a/drivers/rtc/Kconfig
> +++ b/drivers/rtc/Kconfig
> @@ -1302,6 +1302,7 @@ config RTC_DRV_AT91RM9200
>  config RTC_DRV_AT91SAM9
>         tristate "AT91SAM9 RTT as RTC"
>         depends on ARCH_AT91 || COMPILE_TEST
> +       depends on HAS_IOMEM    # For MFD_SYSCON
>         select MFD_SYSCON
>         help
>           Some AT91SAM9 SoCs provide an RTT (Real Time Timer) block which
> 

This is technically correct, but the entire RTC menu is hidden
inside of 'depends on !UML && !S390', so we won't ever get there
on any configuration that does not use HAS_IOMEM.

If we did, all other RTC drivers would also fail.

	Arnd

Re: [RFC 08/15] rtc: at91sam9: Add missing MFD_SYSCON dependency on HAS_IOMEM

[Geert Uytterhoeven]

On Thu, Mar 3, 2016 at 11:55 AM, Arnd Bergmann <arnd@arndb.de> wrote:
> On Thursday 03 March 2016 17:03:34 Krzysztof Kozlowski wrote:
>> index 0da40e2e4280..5c530b6b125d 100644
>> --- a/drivers/rtc/Kconfig
>> +++ b/drivers/rtc/Kconfig
>> @@ -1302,6 +1302,7 @@ config RTC_DRV_AT91RM9200
>>  config RTC_DRV_AT91SAM9
>>         tristate "AT91SAM9 RTT as RTC"
>>         depends on ARCH_AT91 || COMPILE_TEST
>> +       depends on HAS_IOMEM    # For MFD_SYSCON
>>         select MFD_SYSCON
>>         help
>>           Some AT91SAM9 SoCs provide an RTT (Real Time Timer) block which
>>
>
> This is technically correct, but the entire RTC menu is hidden
> inside of 'depends on !UML && !S390', so we won't ever get there
> on any configuration that does not use HAS_IOMEM.
>
> If we did, all other RTC drivers would also fail.

So UML has no RTC. Should/can it use RTC_DRV_GENERIC?

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [RFC 08/15] rtc: at91sam9: Add missing MFD_SYSCON dependency on HAS_IOMEM

[Arnd Bergmann]

On Thursday 03 March 2016 13:27:59 Geert Uytterhoeven wrote:
> On Thu, Mar 3, 2016 at 11:55 AM, Arnd Bergmann <arnd@arndb.de> wrote:
> > On Thursday 03 March 2016 17:03:34 Krzysztof Kozlowski wrote:
> >> index 0da40e2e4280..5c530b6b125d 100644
> >> --- a/drivers/rtc/Kconfig
> >> +++ b/drivers/rtc/Kconfig
> >> @@ -1302,6 +1302,7 @@ config RTC_DRV_AT91RM9200
> >>  config RTC_DRV_AT91SAM9
> >>         tristate "AT91SAM9 RTT as RTC"
> >>         depends on ARCH_AT91 || COMPILE_TEST
> >> +       depends on HAS_IOMEM    # For MFD_SYSCON
> >>         select MFD_SYSCON
> >>         help
> >>           Some AT91SAM9 SoCs provide an RTT (Real Time Timer) block which
> >>
> >
> > This is technically correct, but the entire RTC menu is hidden
> > inside of 'depends on !UML && !S390', so we won't ever get there
> > on any configuration that does not use HAS_IOMEM.
> >
> > If we did, all other RTC drivers would also fail.
> 
> So UML has no RTC. Should/can it use RTC_DRV_GENERIC?

I think nothing should use that, even if it could ;-)

Funny enough, RTC_DRV_GENERIC would probably actually work if you
run UML as root and set iopl() to allow port access, but we don't
really want it to mess with the host RTC.

I don't know where UML gets it real time, but it doesn't actually
need much other than calling clock_gettime(CLOCK_REALTIME, ...)
to get the host time. Presumably it uses some variation of that.

	Arnd

Re: [RFC 09/15] media: platform: Add missing MFD_SYSCON dependency on HAS_IOMEM

[Arnd Bergmann]

On Thursday 03 March 2016 17:03:35 Krzysztof Kozlowski wrote:
> diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig
> index 201f5c296a95..e5931e434fa2 100644
> --- a/drivers/media/platform/Kconfig
> +++ b/drivers/media/platform/Kconfig
> @@ -79,6 +79,7 @@ config VIDEO_OMAP3
>         depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API && ARCH_OMAP3
>         depends on HAS_DMA && OF
>         depends on OMAP_IOMMU
> +       depends on HAS_IOMEM    # For MFD_SYSCON
>         select ARM_DMA_USE_IOMMU
>         select VIDEOBUF2_DMA_CONTIG

This is only built for OMAP3, so we won't get here without HAS_IOMEM

>         select MFD_SYSCON
> diff --git a/drivers/media/platform/exynos4-is/Kconfig b/drivers/media/platform/exynos4-is/Kconfig
> index 57d42c6172c5..c4317b99d257 100644
> --- a/drivers/media/platform/exynos4-is/Kconfig
> +++ b/drivers/media/platform/exynos4-is/Kconfig
> @@ -17,6 +17,7 @@ config VIDEO_S5P_FIMC
>         tristate "S5P/EXYNOS4 FIMC/CAMIF camera interface driver"
>         depends on I2C
>         depends on HAS_DMA
> +       depends on HAS_IOMEM    # For MFD_SYSCON
>         select VIDEOBUF2_DMA_CONTIG
>         select V4L2_MEM2MEM_DEV

This  is guarded by HAS_DMA, which implies HAS_IOMEM afaik.

	Arnd

Re: [RFC 09/15] media: platform: Add missing MFD_SYSCON dependency on HAS_IOMEM

[Geert Uytterhoeven]

On Thu, Mar 3, 2016 at 11:57 AM, Arnd Bergmann <arnd@arndb.de> wrote:
>> --- a/drivers/media/platform/exynos4-is/Kconfig
>> +++ b/drivers/media/platform/exynos4-is/Kconfig
>> @@ -17,6 +17,7 @@ config VIDEO_S5P_FIMC
>>         tristate "S5P/EXYNOS4 FIMC/CAMIF camera interface driver"
>>         depends on I2C
>>         depends on HAS_DMA
>> +       depends on HAS_IOMEM    # For MFD_SYSCON
>>         select VIDEOBUF2_DMA_CONTIG
>>         select V4L2_MEM2MEM_DEV
>
> This  is guarded by HAS_DMA, which implies HAS_IOMEM afaik.

No systems around with HV-based DMA?

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [rtc-linux] Re: [RFC 09/15] media: platform: Add missing MFD_SYSCON dependency on HAS_IOMEM

[Krzysztof Kozlowski]

2016-03-03 19:57 GMT+09:00 Arnd Bergmann <arnd@arndb.de>:
> On Thursday 03 March 2016 17:03:35 Krzysztof Kozlowski wrote:
>> diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig
>> index 201f5c296a95..e5931e434fa2 100644
>> --- a/drivers/media/platform/Kconfig
>> +++ b/drivers/media/platform/Kconfig
>> @@ -79,6 +79,7 @@ config VIDEO_OMAP3
>>         depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API && ARCH_OMAP3
>>         depends on HAS_DMA && OF
>>         depends on OMAP_IOMMU
>> +       depends on HAS_IOMEM    # For MFD_SYSCON
>>         select ARM_DMA_USE_IOMMU
>>         select VIDEOBUF2_DMA_CONTIG
>
> This is only built for OMAP3, so we won't get here without HAS_IOMEM

Indeed.

>
>>         select MFD_SYSCON
>> diff --git a/drivers/media/platform/exynos4-is/Kconfig b/drivers/media/platform/exynos4-is/Kconfig
>> index 57d42c6172c5..c4317b99d257 100644
>> --- a/drivers/media/platform/exynos4-is/Kconfig
>> +++ b/drivers/media/platform/exynos4-is/Kconfig
>> @@ -17,6 +17,7 @@ config VIDEO_S5P_FIMC
>>         tristate "S5P/EXYNOS4 FIMC/CAMIF camera interface driver"
>>         depends on I2C
>>         depends on HAS_DMA
>> +       depends on HAS_IOMEM    # For MFD_SYSCON
>>         select VIDEOBUF2_DMA_CONTIG
>>         select V4L2_MEM2MEM_DEV
>
> This  is guarded by HAS_DMA, which implies HAS_IOMEM afaik.

Looking at Kconfigs - no, it is not implied (or am I missing
something)... and sometimes dependency on HAS_IOMEM is next to
HAS_DMA.

BR,
Krzysztof

Re: [rtc-linux] Re: [RFC 09/15] media: platform: Add missing MFD_SYSCON dependency on HAS_IOMEM

[Arnd Bergmann]

On Thursday 03 March 2016 21:40:23 Krzysztof Kozlowski wrote:
> >>         select MFD_SYSCON
> >> diff --git a/drivers/media/platform/exynos4-is/Kconfig b/drivers/media/platform/exynos4-is/Kconfig
> >> index 57d42c6172c5..c4317b99d257 100644
> >> --- a/drivers/media/platform/exynos4-is/Kconfig
> >> +++ b/drivers/media/platform/exynos4-is/Kconfig
> >> @@ -17,6 +17,7 @@ config VIDEO_S5P_FIMC
> >>         tristate "S5P/EXYNOS4 FIMC/CAMIF camera interface driver"
> >>         depends on I2C
> >>         depends on HAS_DMA
> >> +       depends on HAS_IOMEM    # For MFD_SYSCON
> >>         select VIDEOBUF2_DMA_CONTIG
> >>         select V4L2_MEM2MEM_DEV
> >
> > This  is guarded by HAS_DMA, which implies HAS_IOMEM afaik.
> 
> Looking at Kconfigs - no, it is not implied (or am I missing
> something)... and sometimes dependency on HAS_IOMEM is next to
> HAS_DMA.
> 
> 

Ah, you are right: UML has no DMA and no IOMEM, but s390 can
have IOMEM (if PCI is enabled) and always sets HAS_DMA.

In practice, I think the HAS_DMA symbol is not as well-defined
as it should be, it basically refers to the presence of the dma-mapping.h
API, and that only really makes sense when you also have IOMEM,
so there might be an implied dependency between the two, but it's
not enforced or actually true.

	Arnd

Re: [RFC 10/15] net: ethernet: Add missing MFD_SYSCON dependency on HAS_IOMEM

[Arnd Bergmann]

On Thursday 03 March 2016 17:03:36 Krzysztof Kozlowski wrote:
> The MFD_SYSCON depends on HAS_IOMEM so when selecting it avoid unmet
> direct dependencies.
> 
> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> ---
>  drivers/net/ethernet/hisilicon/Kconfig      | 1 +
>  drivers/net/ethernet/stmicro/stmmac/Kconfig | 6 ++++++
>  drivers/net/ethernet/ti/Kconfig             | 1 +
>  3 files changed, 8 insertions(+)
> 
> diff --git a/drivers/net/ethernet/hisilicon/Kconfig b/drivers/net/ethernet/hisilicon/Kconfig
> index 74beb1867230..6a9c91781bf9 100644
> --- a/drivers/net/ethernet/hisilicon/Kconfig
> +++ b/drivers/net/ethernet/hisilicon/Kconfig
> @@ -26,6 +26,7 @@ config HIX5HD2_GMAC
>  config HIP04_ETH
>  	tristate "HISILICON P04 Ethernet support"
>  	select MARVELL_PHY
> +	depends on HAS_IOMEM	# For MFD_SYSCON
>  	select MFD_SYSCON
>  	select HNS_MDIO
>  	---help---

Geert added a HAS_DMA dependency in linux-next, which takes
care of this, although it's still technically correct as well.

> diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig
> index cec147d1d34f..d6902bf6e90f 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/Kconfig
> +++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig
> @@ -16,6 +16,7 @@ if STMMAC_ETH
>  config STMMAC_PLATFORM
>  	tristate "STMMAC Platform bus support"
>  	depends on STMMAC_ETH
> +	depends on HAS_IOMEM	# For MFD_SYSCON
>  	select MFD_SYSCON
>  	default y
>  	---help---

NET_VENDOR_STMICRO depends on HAS_IOMEM, so we are good here for the
entire directory.

> diff --git a/drivers/net/ethernet/ti/Kconfig b/drivers/net/ethernet/ti/Kconfig
> index e7f0b7d95b65..ec56cebe929d 100644
> --- a/drivers/net/ethernet/ti/Kconfig
> +++ b/drivers/net/ethernet/ti/Kconfig
> @@ -62,6 +62,7 @@ config TI_CPSW_ALE
>  config TI_CPSW
>  	tristate "TI CPSW Switch Support"
>  	depends on ARCH_DAVINCI || ARCH_OMAP2PLUS
> +	depends on HAS_IOMEM	# For MFD_SYSCON
>  	select TI_DAVINCI_CPDMA
>  	select TI_DAVINCI_MDIO
>  	select TI_CPSW_PHY_SEL
> 


This again is platform specific, so the chagnge is not needed.

	Arnd

Re: [RFC 11/15] power: reset: keystone: Add missing MFD_SYSCON dependency on HAS_IOMEM

[Arnd Bergmann]

On Thursday 03 March 2016 17:03:37 Krzysztof Kozlowski wrote:
> diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
> index 0a6408a39c66..0f34846ae80d 100644
> --- a/drivers/power/reset/Kconfig
> +++ b/drivers/power/reset/Kconfig
> @@ -141,6 +141,7 @@ config POWER_RESET_XGENE
>  config POWER_RESET_KEYSTONE
>         bool "Keystone reset driver"
>         depends on ARCH_KEYSTONE
> +       depends on HAS_IOMEM    # For MFD_SYSCON
>         select MFD_SYSCON
>         help
>           Reboot support for the KEYSTONE SoCs.
> 

This is platform specific, but we should probably add || COMPILE_TEST
along with the HAS_IOMEM dependency.

	Arnd

Re: [RFC 11/15] power: reset: keystone: Add missing MFD_SYSCON dependency on HAS_IOMEM

[Sebastian Reichel]

[-- Attachment #1.1: Type: text/plain, Size: 851 bytes --]

Hi,

On Thu, Mar 03, 2016 at 12:00:14PM +0100, Arnd Bergmann wrote:
> On Thursday 03 March 2016 17:03:37 Krzysztof Kozlowski wrote:
> > diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
> > index 0a6408a39c66..0f34846ae80d 100644
> > --- a/drivers/power/reset/Kconfig
> > +++ b/drivers/power/reset/Kconfig
> > @@ -141,6 +141,7 @@ config POWER_RESET_XGENE
> >  config POWER_RESET_KEYSTONE
> >         bool "Keystone reset driver"
> >         depends on ARCH_KEYSTONE
> > +       depends on HAS_IOMEM    # For MFD_SYSCON
> >         select MFD_SYSCON
> >         help
> >           Reboot support for the KEYSTONE SoCs.
> > 
> 
> This is platform specific, but we should probably add || COMPILE_TEST
> along with the HAS_IOMEM dependency.

Sounds sensible. Will you guys send an updated patch?

-- Sebastian

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

[-- Attachment #2: Type: text/plain, Size: 169 bytes --]

_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

Re: [rtc-linux] Re: [RFC 11/15] power: reset: keystone: Add missing MFD_SYSCON dependency on HAS_IOMEM

[Krzysztof Kozlowski]

2016-03-03 21:33 GMT+09:00 Sebastian Reichel <sre@kernel.org>:
> Hi,
>
> On Thu, Mar 03, 2016 at 12:00:14PM +0100, Arnd Bergmann wrote:
>> On Thursday 03 March 2016 17:03:37 Krzysztof Kozlowski wrote:
>> > diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
>> > index 0a6408a39c66..0f34846ae80d 100644
>> > --- a/drivers/power/reset/Kconfig
>> > +++ b/drivers/power/reset/Kconfig
>> > @@ -141,6 +141,7 @@ config POWER_RESET_XGENE
>> >  config POWER_RESET_KEYSTONE
>> >         bool "Keystone reset driver"
>> >         depends on ARCH_KEYSTONE
>> > +       depends on HAS_IOMEM    # For MFD_SYSCON
>> >         select MFD_SYSCON
>> >         help
>> >           Reboot support for the KEYSTONE SoCs.
>> >
>>
>> This is platform specific, but we should probably add || COMPILE_TEST
>> along with the HAS_IOMEM dependency.
>
> Sounds sensible. Will you guys send an updated patch?
>

Sure, I'll make some compile tests and send a v2.

Best regards,
Krzysztof

Re: [RFC 14/15] usb: xhci: mtk: Add missing MFD_SYSCON dependency on HAS_IOMEM

[Arnd Bergmann]

On Thursday 03 March 2016 17:03:40 Krzysztof Kozlowski wrote:
> index 8c20ebbc049c..f759a778d606 100644
> --- a/drivers/usb/host/Kconfig
> +++ b/drivers/usb/host/Kconfig
> @@ -45,6 +45,7 @@ config USB_XHCI_PLATFORM
>  
>  config USB_XHCI_MTK
>         tristate "xHCI support for Mediatek MT65xx"
> +       depends on HAS_IOMEM    # For MFD_SYSCON
>         select MFD_SYSCON
>         depends on ARCH_MEDIATEK || COMPILE_TEST
>         ---help---
> 

This already has the dependency, as it depends on XHCD_PLATFORM
which depends on HAS_IOMEM.

	Arnd

Re: [rtc-linux] [RFC 13/15] staging: media: omap4iss: Add missing MFD_SYSCON dependency on HAS_IOMEM

[Krzysztof Kozlowski]

2016-03-03 17:03 GMT+09:00 Krzysztof Kozlowski <k.kozlowski@samsung.com>:
> The MFD_SYSCON depends on HAS_IOMEM so when selecting it avoid unmet
> direct dependencies.
>
> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> ---
>  drivers/staging/media/omap4iss/Kconfig | 1 +
>  1 file changed, 1 insertion(+)
>
> diff --git a/drivers/staging/media/omap4iss/Kconfig b/drivers/staging/media/omap4iss/Kconfig
> index 46183464ee79..7dea072172aa 100644
> --- a/drivers/staging/media/omap4iss/Kconfig
> +++ b/drivers/staging/media/omap4iss/Kconfig
> @@ -2,6 +2,7 @@ config VIDEO_OMAP4
>         tristate "OMAP 4 Camera support"
>         depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API && I2C && ARCH_OMAP4
>         depends on HAS_DMA
> +       depends on HAS_IOMEM    # For MFD_SYSCON
>         select MFD_SYSCON
>         select VIDEOBUF2_DMA_CONTIG
>         ---help---

False alarm, no need for the patch (this depends on ARCH_OMAP4).

Best regards,
Krzysztof

Re: [rtc-linux] [RFC 12/15] soc: qcom: Add missing MFD_SYSCON dependency on HAS_IOMEM

[Krzysztof Kozlowski]

2016-03-03 17:03 GMT+09:00 Krzysztof Kozlowski <k.kozlowski@samsung.com>:
> The MFD_SYSCON depends on HAS_IOMEM so when selecting it avoid unmet
> direct dependencies.
>
> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> ---
>  drivers/soc/qcom/Kconfig | 1 +
>  1 file changed, 1 insertion(+)
>
> diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
> index 461b387d03cc..24de48134c15 100644
> --- a/drivers/soc/qcom/Kconfig
> +++ b/drivers/soc/qcom/Kconfig
> @@ -4,6 +4,7 @@
>  config QCOM_GSBI
>          tristate "QCOM General Serial Bus Interface"
>          depends on ARCH_QCOM
> +        depends on HAS_IOMEM   # For MFD_SYSCON
>          select MFD_SYSCON

False alarm, no need for the patch (this depends on ARCH_QCOM).

Best regards,
Krzysztof

Re: [rtc-linux] [RFC 07/15] pinctrl: mvebu: Add missing MFD_SYSCON dependency on HAS_IOMEM

[Krzysztof Kozlowski]

2016-03-03 17:03 GMT+09:00 Krzysztof Kozlowski <k.kozlowski@samsung.com>:
> The MFD_SYSCON depends on HAS_IOMEM so when selecting it avoid unmet
> direct dependencies.
>
> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> ---
>  drivers/pinctrl/mvebu/Kconfig | 1 +
>  1 file changed, 1 insertion(+)
>
> diff --git a/drivers/pinctrl/mvebu/Kconfig b/drivers/pinctrl/mvebu/Kconfig
> index 170602407c0d..13685923729c 100644
> --- a/drivers/pinctrl/mvebu/Kconfig
> +++ b/drivers/pinctrl/mvebu/Kconfig
> @@ -7,6 +7,7 @@ config PINCTRL_MVEBU
>
>  config PINCTRL_DOVE
>         bool
> +       depends on HAS_IOMEM    # For MFD_SYSCON
>         select PINCTRL_MVEBU
>         select MFD_SYSCON

False alarm, no need for the patch (non-selectable symbol)

Best regards,
Krzysztof