linux-gpio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Westerberg, Mika" <mika.westerberg@intel.com>
To: Linus Walleij <linus.walleij@linaro.org>
Cc: "Zheng, Qi" <qi.zheng@intel.com>,
	"Zha, Qipeng" <qipeng.zha@intel.com>,
	"linux-gpio@vger.kernel.org" <linux-gpio@vger.kernel.org>
Subject: Re: [PATCH 2/3] pinctrl:Intel: clear interrupt status for every IRQ setup
Date: Mon, 14 Mar 2016 16:26:07 +0200	[thread overview]
Message-ID: <20160314142607.GI1793@lahna.fi.intel.com> (raw)
In-Reply-To: <20160314130041.GH1793@lahna.fi.intel.com>

On Mon, Mar 14, 2016 at 03:00:41PM +0200, Westerberg, Mika wrote:
> 
> > > Your set_type() is supporting edges but have all IRQs
> > > handled by handle_simple_irq() rather than handle_edge_irq()
> > > for the edges, which gives a more robust control flow
> > > from IRQ to ACK to calling the handler.
> > > 
> > > Zheng/Mika: please look at how the level/edge
> > > IRQs are handled in drivers/gpio/gpio-pl061.c
> > > where I *tried* to do things right, switching handler
> > > in .set_type() using irq_set_handler_locked(). I think
> > > you may need to use handle_edge_irq() for the edge IRQs
> > > and handle_level_irq() for the level IRQs just like I do
> > > in the PL061 driver.
> > 
> > The driver is already doing that as far as I can tell (see
> > intel_gpio_irq_type()).
> 
> I will check again if we are still missing something there.

Maybe we can implement ->enable() that clears the status right before
interrupt is unmasked? Something like below.

diff --git a/drivers/pinctrl/intel/pinctrl-intel.c b/drivers/pinctrl/intel/pinctrl-intel.c
index c0f5586218c4..b4873a4e25d5 100644
--- a/drivers/pinctrl/intel/pinctrl-intel.c
+++ b/drivers/pinctrl/intel/pinctrl-intel.c
@@ -648,6 +648,33 @@ static const struct gpio_chip intel_gpio_chip = {
 	.set = intel_gpio_set,
 };
 
+static void intel_gpio_irq_enable(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct intel_pinctrl *pctrl = gpiochip_get_data(gc);
+	const struct intel_community *community;
+	unsigned pin = irqd_to_hwirq(d);
+	unsigned long flags;
+
+	spin_lock_irqsave(&pctrl->lock, flags);
+
+	community = intel_get_community(pctrl, pin);
+	if (community) {
+		unsigned padno = pin_to_padno(community, pin);
+		unsigned gpp_offset = padno % community->gpp_size;
+		unsigned gpp = padno / community->gpp_size;
+		unsigned value;
+
+		writel(BIT(gpp_offset), community->regs + GPI_IS + gpp * 4);
+
+		value = readl(community->regs + community->ie_offset + gpp * 4);
+		value |= BIT(gpp_offset);
+		writel(value, community->regs + community->ie_offset + gpp * 4);
+	}
+
+	spin_unlock_irqrestore(&pctrl->lock, flags);
+}
+
 static void intel_gpio_irq_ack(struct irq_data *d)
 {
 	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
@@ -856,6 +883,7 @@ static irqreturn_t intel_gpio_irq(int irq, void *data)
 
 static struct irq_chip intel_gpio_irqchip = {
 	.name = "intel-gpio",
+	.irq_enable = intel_gpio_irq_enable,
 	.irq_ack = intel_gpio_irq_ack,
 	.irq_mask = intel_gpio_irq_mask,
 	.irq_unmask = intel_gpio_irq_unmask,

  reply	other threads:[~2016-03-14 14:26 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-03-11 17:06 [PATCH 1/3] pinctrl: Intel: add RX invertion config Qipeng Zha
2016-03-11  9:38 ` Mika Westerberg
2016-03-14  1:10   ` Zheng, Qi
2016-03-14  8:50     ` Westerberg, Mika
2016-03-14  8:56       ` Zheng, Qi
2016-03-14 12:26         ` Linus Walleij
2016-03-15  2:17           ` Zheng, Qi
2016-03-16 12:27             ` Linus Walleij
2016-03-16 13:34               ` Daniel Vetter
     [not found]                 ` <20160316133412.GN14170-dv86pmgwkMBes7Z6vYuT8azUEOm+Xw19@public.gmane.org>
2016-03-17 14:41                   ` Linus Walleij
2016-03-17 15:14                     ` [Intel-gfx] " Jani Nikula
2016-03-11 17:06 ` [PATCH 2/3] pinctrl:Intel: clear interrupt status for every IRQ setup Qipeng Zha
2016-03-11  9:45   ` Mika Westerberg
2016-03-14  1:24     ` Zheng, Qi
2016-03-14  8:44       ` Westerberg, Mika
2016-03-14  9:02         ` Zheng, Qi
2016-03-14  9:20           ` Westerberg, Mika
2016-03-14 12:40         ` Linus Walleij
2016-03-14 12:54           ` Westerberg, Mika
2016-03-14 13:00             ` Westerberg, Mika
2016-03-14 14:26               ` Westerberg, Mika [this message]
2016-03-15  5:17                 ` Zheng, Qi
2016-03-11 17:06 ` [PATCH 3/3] pinctrl:Intel: make the high level interrupt working Qipeng Zha
2016-03-11  9:49   ` Mika Westerberg
2016-03-14  1:26     ` Zheng, Qi
2016-03-14  1:40     ` Zheng, Qi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20160314142607.GI1793@lahna.fi.intel.com \
    --to=mika.westerberg@intel.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=qi.zheng@intel.com \
    --cc=qipeng.zha@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).