From: Peng Fan <van.freenix@gmail.com>
To: linus.walleij@linaro.org, shawnguo@kernel.org
Cc: linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org,
Philipp Zabel <p.zabel@pengutronix.de>,
Stefan Agner <stefan@agner.ch>, Vladimir Zapolskiy <vz@mleia.com>
Subject: Re: [PATCH] pinctrl: imx: fix initialization of imx_pinctrl_desc
Date: Mon, 30 May 2016 20:58:04 +0800 [thread overview]
Message-ID: <20160530125802.GA2800@linux-7smt.suse> (raw)
In-Reply-To: <1463563919-4144-1-git-send-email-van.freenix@gmail.com>
Hi Linus, Shawn
Kindly ping.. Do you have any comments on this patch?
Thanks,
Peng.
On Wed, May 18, 2016 at 05:31:59PM +0800, Peng Fan wrote:
>To i.MX7D, there are two iomux controllers, iomuxc and iomuxc_lpsr.
>They should not share one pin controller descriptor, otherwise
>the value filled into imx_pinctrl_desc when probing the first
>iomux controller will be overridden when probing the second one.
>
>In this patch, discard the static allcoated imx_pinctrl_desc and
>switch to dynamically allcate pin controller descriptor for each
>iomux controller.
>
>Signed-off-by: Peng Fan <van.freenix@gmail.com>
>Cc: Linus Walleij <linus.walleij@linaro.org>
>Cc: Shawn Guo <shawnguo@kernel.org>
>Cc: Philipp Zabel <p.zabel@pengutronix.de>
>Cc: Stefan Agner <stefan@agner.ch>
>Cc: Vladimir Zapolskiy <vz@mleia.com>
>---
> drivers/pinctrl/freescale/pinctrl-imx.c | 25 ++++++++++++++-----------
> 1 file changed, 14 insertions(+), 11 deletions(-)
>
>diff --git a/drivers/pinctrl/freescale/pinctrl-imx.c b/drivers/pinctrl/freescale/pinctrl-imx.c
>index 9cfa544..40fe939 100644
>--- a/drivers/pinctrl/freescale/pinctrl-imx.c
>+++ b/drivers/pinctrl/freescale/pinctrl-imx.c
>@@ -513,13 +513,6 @@ static const struct pinconf_ops imx_pinconf_ops = {
> .pin_config_group_dbg_show = imx_pinconf_group_dbg_show,
> };
>
>-static struct pinctrl_desc imx_pinctrl_desc = {
>- .pctlops = &imx_pctrl_ops,
>- .pmxops = &imx_pmx_ops,
>- .confops = &imx_pinconf_ops,
>- .owner = THIS_MODULE,
>-};
>-
> /*
> * Each pin represented in fsl,pins consists of 5 u32 PIN_FUNC_ID and
> * 1 u32 CONFIG, so 24 types in total for each pin.
>@@ -722,6 +715,7 @@ int imx_pinctrl_probe(struct platform_device *pdev,
> {
> struct regmap_config config = { .name = "gpr" };
> struct device_node *dev_np = pdev->dev.of_node;
>+ struct pinctrl_desc *imx_pinctrl_desc;
> struct device_node *np;
> struct imx_pinctrl *ipctl;
> struct resource *res;
>@@ -776,9 +770,18 @@ int imx_pinctrl_probe(struct platform_device *pdev,
> }
> }
>
>- imx_pinctrl_desc.name = dev_name(&pdev->dev);
>- imx_pinctrl_desc.pins = info->pins;
>- imx_pinctrl_desc.npins = info->npins;
>+ imx_pinctrl_desc = devm_kzalloc(&pdev->dev, sizeof(*imx_pinctrl_desc),
>+ GFP_KERNEL);
>+ if (!imx_pinctrl_desc)
>+ return -ENOMEM;
>+
>+ imx_pinctrl_desc->name = dev_name(&pdev->dev);
>+ imx_pinctrl_desc->pins = info->pins;
>+ imx_pinctrl_desc->npins = info->npins;
>+ imx_pinctrl_desc->pctlops = &imx_pctrl_ops,
>+ imx_pinctrl_desc->pmxops = &imx_pmx_ops,
>+ imx_pinctrl_desc->confops = &imx_pinconf_ops,
>+ imx_pinctrl_desc->owner = THIS_MODULE,
>
> ret = imx_pinctrl_probe_dt(pdev, info);
> if (ret) {
>@@ -789,7 +792,7 @@ int imx_pinctrl_probe(struct platform_device *pdev,
> ipctl->info = info;
> ipctl->dev = info->dev;
> platform_set_drvdata(pdev, ipctl);
>- ipctl->pctl = pinctrl_register(&imx_pinctrl_desc, &pdev->dev, ipctl);
>+ ipctl->pctl = pinctrl_register(imx_pinctrl_desc, &pdev->dev, ipctl);
> if (IS_ERR(ipctl->pctl)) {
> dev_err(&pdev->dev, "could not register IMX pinctrl driver\n");
> return PTR_ERR(ipctl->pctl);
>--
>2.6.2
>
next prev parent reply other threads:[~2016-05-30 12:58 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-18 9:31 [PATCH] pinctrl: imx: fix initialization of imx_pinctrl_desc Peng Fan
2016-05-30 12:58 ` Peng Fan [this message]
2016-05-31 8:55 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160530125802.GA2800@linux-7smt.suse \
--to=van.freenix@gmail.com \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=stefan@agner.ch \
--cc=vz@mleia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).