Re: [PATCH v4] gpio: add Intel WhiskeyCove GPIO driver

[Bin Gao <bin.gao@linux.intel.com>]

On Wed, Jul 06, 2016 at 01:07:15PM +0300, Mika Westerberg wrote:
> On Wed, Jul 06, 2016 at 10:57:19AM +0200, Linus Walleij wrote:
> > On Tue, Jun 28, 2016 at 1:56 AM, Bin Gao <bin.gao@linux.intel.com> wrote:
> > 
> > > This patch introduces a separate GPIO driver for Intel WhiskeyCove PMIC.
> > > This driver is based on gpio-crystalcove.c.
> > >
> > > Signed-off-by: Ajay Thomas <ajay.thomas.david.rajamanickam@intel.com>
> > > Signed-off-by: Bin Gao <bin.gao@intel.com>
> > > ---
> > > Changes in v4:
> > >  - Converted CTLI_INTCNT_XX macros to less verbose ones INT_DETECT_XX.
> > >  - Add comments about why there is no .pm for the driver.
> > >  - Header files re-ordered.
> > >  - Various coding style change to address Andy's comments.
> > 
> > Mika can I have your ACK/review tag on this driver so I can merge it?
> > I prefer to have all Intel stuff bearing your seal of approval.
> 
> Thanks for your trust :)
> 
> I don't have much comments in addition to what you already pointed out.
> I'll just wait for the next revision and give my ack then.
> 
> > > +static irqreturn_t wcove_gpio_irq_handler(int irq, void *data)
> > > +{
> > > +       int pending;
> > > +       unsigned int p0, p1, virq, gpio;
> > > +       struct wcove_gpio *wg = data;
> 
> Bin,
> 
> Since you are going to make another iteration, please arrange the
> declarations like:
> 
> 	unsigned int p0, p1, virq, gpio;
> 	struct wcove_gpio *wg = data;
> 	int pending;

Yes, will do. Thanks.

-Bin