From: Bin Gao <bin.gao@linux.intel.com>
To: Linus Walleij <linus.walleij@linaro.org>
Cc: Alexandre Courbot <gnurou@gmail.com>,
linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org,
Bin Gao <bin.gao@intel.com>
Subject: [PATCH] gpio: wcove-gpio: add get_direction method
Date: Mon, 15 Aug 2016 11:03:23 -0700 [thread overview]
Message-ID: <20160815180323.GA229243@worksta> (raw)
This patch adds .get_direction method for the gpio_chip structure
of the wcove_gpio driver.
Signed-off-by: Bin Gao <bin.gao@intel.com>
---
drivers/gpio/gpio-wcove.c | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/drivers/gpio/gpio-wcove.c b/drivers/gpio/gpio-wcove.c
index f5c88df..e11d6a3 100644
--- a/drivers/gpio/gpio-wcove.c
+++ b/drivers/gpio/gpio-wcove.c
@@ -164,6 +164,19 @@ static int wcove_gpio_dir_out(struct gpio_chip *chip, unsigned int gpio,
CTLO_OUTPUT_SET | value);
}
+static int wcove_gpio_get_direction(struct gpio_chip *chip, unsigned int gpio)
+{
+ struct wcove_gpio *wg = gpiochip_get_data(chip);
+ unsigned int val;
+ int ret;
+
+ ret = regmap_read(wg->regmap, to_reg(gpio, CTRL_OUT), &val);
+ if (ret)
+ return ret;
+
+ return !(val & CTLO_DIR_OUT);
+}
+
static int wcove_gpio_get(struct gpio_chip *chip, unsigned int gpio)
{
struct wcove_gpio *wg = gpiochip_get_data(chip);
@@ -394,6 +407,7 @@ static int wcove_gpio_probe(struct platform_device *pdev)
wg->chip.label = KBUILD_MODNAME;
wg->chip.direction_input = wcove_gpio_dir_in;
wg->chip.direction_output = wcove_gpio_dir_out;
+ wg->chip.get_direction = wcove_gpio_get_direction;
wg->chip.get = wcove_gpio_get;
wg->chip.set = wcove_gpio_set;
wg->chip.set_single_ended = wcove_gpio_set_single_ended,
--
1.9.1
next reply other threads:[~2016-08-15 17:58 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-15 18:03 Bin Gao [this message]
2016-08-19 13:02 ` [PATCH] gpio: wcove-gpio: add get_direction method Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160815180323.GA229243@worksta \
--to=bin.gao@linux.intel.com \
--cc=bin.gao@intel.com \
--cc=gnurou@gmail.com \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).