From: Pavel Machek <pavel@ucw.cz>
To: linus.walleij@linaro.org, gnurou@gmail.com, corbet@lwn.net,
linux-gpio@vger.kernel.org, linux-doc@vger.kernel.org,
linux-kernel@vger.kernel.org, Andrew Morton <akpm@osdl.org>,
lgirdwood@gmail.com, broonie@kernel.org
Subject: [PATCH] regulator/overview.txt: Use ".." for ranges, instead of "->"
Date: Tue, 11 Oct 2016 09:32:54 +0200 [thread overview]
Message-ID: <20161011073254.GA19702@amd> (raw)
[-- Attachment #1: Type: text/plain, Size: 1505 bytes --]
Using "->" to indicate range is not too common, switch to ".."
Signed-off-by: Pavel Machek <pavel@ucw.cz>
--- a/Documentation/power/regulator/overview.txt
+++ b/Documentation/power/regulator/overview.txt
@@ -90,7 +90,7 @@ Some terms used in this document:-
operating parameters and is specified in the regulator
datasheet. i.e.
- - voltage output is in the range 800mV -> 3500mV.
+ - voltage output is in the range 800mV .. 3500mV.
- regulator current output limit is 20mA @ 5V but is
10mA @ 10V.
@@ -99,8 +99,8 @@ Some terms used in this document:-
power domain to a particular power range. i.e.
- Domain-1 voltage is 3300mV
- - Domain-2 voltage is 1400mV -> 1600mV
- - Domain-3 current limit is 0mA -> 20mA.
+ - Domain-2 voltage is 1400mV .. 1600mV
+ - Domain-3 current limit is 0mA .. 20mA.
Consumer Level: This is defined by consumer drivers
dynamically setting voltage or current limit levels.
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 181 bytes --]
next reply other threads:[~2016-10-11 7:32 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-11 7:32 Pavel Machek [this message]
-- strict thread matches above, loose matches on Subject: below --
2016-10-03 8:45 [PATCH] regulator/overview.txt: Use ".." for ranges, instead of "->" Pavel Machek
2016-10-10 8:44 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161011073254.GA19702@amd \
--to=pavel@ucw.cz \
--cc=akpm@osdl.org \
--cc=broonie@kernel.org \
--cc=corbet@lwn.net \
--cc=gnurou@gmail.com \
--cc=lgirdwood@gmail.com \
--cc=linus.walleij@linaro.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).