* [PATCH] regulator/overview.txt: Use ".." for ranges, instead of "->"
@ 2016-10-03 8:45 Pavel Machek
2016-10-10 8:44 ` Linus Walleij
0 siblings, 1 reply; 3+ messages in thread
From: Pavel Machek @ 2016-10-03 8:45 UTC (permalink / raw)
To: linus.walleij, gnurou, corbet, linux-gpio, linux-doc,
linux-kernel
[-- Attachment #1: Type: text/plain, Size: 1364 bytes --]
Using "->" to indicate range is not too common, switch to ".."
Signed-off-by: Pavel Machek <pavel@ucw.cz>
--- a/Documentation/power/regulator/overview.txt
+++ b/Documentation/power/regulator/overview.txt
@@ -90,7 +90,7 @@ Some terms used in this document:-
operating parameters and is specified in the regulator
datasheet. i.e.
- - voltage output is in the range 800mV -> 3500mV.
+ - voltage output is in the range 800mV .. 3500mV.
- regulator current output limit is 20mA @ 5V but is
10mA @ 10V.
@@ -99,8 +99,8 @@ Some terms used in this document:-
power domain to a particular power range. i.e.
- Domain-1 voltage is 3300mV
- - Domain-2 voltage is 1400mV -> 1600mV
- - Domain-3 current limit is 0mA -> 20mA.
+ - Domain-2 voltage is 1400mV .. 1600mV
+ - Domain-3 current limit is 0mA .. 20mA.
Consumer Level: This is defined by consumer drivers
dynamically setting voltage or current limit levels.
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 181 bytes --]
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] regulator/overview.txt: Use ".." for ranges, instead of "->"
2016-10-03 8:45 Pavel Machek
@ 2016-10-10 8:44 ` Linus Walleij
0 siblings, 0 replies; 3+ messages in thread
From: Linus Walleij @ 2016-10-10 8:44 UTC (permalink / raw)
To: Pavel Machek
Cc: Alexandre Courbot, Jon Corbet, linux-gpio@vger.kernel.org,
linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org
On Mon, Oct 3, 2016 at 10:45 AM, Pavel Machek <pavel@ucw.cz> wrote:
> Using "->" to indicate range is not too common, switch to ".."
>
> Signed-off-by: Pavel Machek <pavel@ucw.cz>
You sent this patch to me... resend it to the regulator maintainer.
Yours,
Linus Walleij
^ permalink raw reply [flat|nested] 3+ messages in thread
* [PATCH] regulator/overview.txt: Use ".." for ranges, instead of "->"
@ 2016-10-11 7:32 Pavel Machek
0 siblings, 0 replies; 3+ messages in thread
From: Pavel Machek @ 2016-10-11 7:32 UTC (permalink / raw)
To: linus.walleij, gnurou, corbet, linux-gpio, linux-doc,
linux-kernel, Andrew Morton, lgirdwood, broonie
[-- Attachment #1: Type: text/plain, Size: 1505 bytes --]
Using "->" to indicate range is not too common, switch to ".."
Signed-off-by: Pavel Machek <pavel@ucw.cz>
--- a/Documentation/power/regulator/overview.txt
+++ b/Documentation/power/regulator/overview.txt
@@ -90,7 +90,7 @@ Some terms used in this document:-
operating parameters and is specified in the regulator
datasheet. i.e.
- - voltage output is in the range 800mV -> 3500mV.
+ - voltage output is in the range 800mV .. 3500mV.
- regulator current output limit is 20mA @ 5V but is
10mA @ 10V.
@@ -99,8 +99,8 @@ Some terms used in this document:-
power domain to a particular power range. i.e.
- Domain-1 voltage is 3300mV
- - Domain-2 voltage is 1400mV -> 1600mV
- - Domain-3 current limit is 0mA -> 20mA.
+ - Domain-2 voltage is 1400mV .. 1600mV
+ - Domain-3 current limit is 0mA .. 20mA.
Consumer Level: This is defined by consumer drivers
dynamically setting voltage or current limit levels.
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 181 bytes --]
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2016-10-11 7:32 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-10-11 7:32 [PATCH] regulator/overview.txt: Use ".." for ranges, instead of "->" Pavel Machek
-- strict thread matches above, loose matches on Subject: below --
2016-10-03 8:45 Pavel Machek
2016-10-10 8:44 ` Linus Walleij
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).