From: "Niklas Söderlund" <niklas.soderlund@ragnatech.se>
To: Geert Uytterhoeven <geert+renesas@glider.be>,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: "Linus Walleij" <linus.walleij@linaro.org>,
linux-renesas-soc@vger.kernel.org, linux-gpio@vger.kernel.org,
"Niklas Söderlund" <niklas.soderlund+renesas@ragnatech.se>
Subject: [PATCH] pinctrl: sh-pfc: r8a7796: Add DU support
Date: Fri, 11 Nov 2016 21:40:03 +0100 [thread overview]
Message-ID: <20161111204003.4022-1-niklas.soderlund@ragnatech.se> (raw)
From: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Only the DU parallel RGB output signals are included, HDMI and TCON pins
will be added in separate groups. Based on a similar patch from Laurent
Pinchart for the r8a7795 PFC driver.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
---
drivers/pinctrl/sh-pfc/pfc-r8a7796.c | 100 +++++++++++++++++++++++++++++++++++
1 file changed, 100 insertions(+)
diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a7796.c b/drivers/pinctrl/sh-pfc/pfc-r8a7796.c
index dc9b671..70e81ab 100644
--- a/drivers/pinctrl/sh-pfc/pfc-r8a7796.c
+++ b/drivers/pinctrl/sh-pfc/pfc-r8a7796.c
@@ -1489,6 +1489,86 @@ static const u16 pinmux_data[] = {
static const struct sh_pfc_pin pinmux_pins[] = {
PINMUX_GPIO_GP_ALL(),
};
+/* - DU --------------------------------------------------------------------- */
+static const unsigned int du_rgb666_pins[] = {
+ /* R[7:2], G[7:2], B[7:2] */
+ RCAR_GP_PIN(0, 15), RCAR_GP_PIN(0, 14), RCAR_GP_PIN(0, 13),
+ RCAR_GP_PIN(0, 12), RCAR_GP_PIN(0, 11), RCAR_GP_PIN(0, 10),
+ RCAR_GP_PIN(1, 15), RCAR_GP_PIN(1, 14), RCAR_GP_PIN(1, 13),
+ RCAR_GP_PIN(1, 12), RCAR_GP_PIN(1, 19), RCAR_GP_PIN(1, 18),
+ RCAR_GP_PIN(1, 7), RCAR_GP_PIN(1, 6), RCAR_GP_PIN(1, 5),
+ RCAR_GP_PIN(1, 4), RCAR_GP_PIN(1, 3), RCAR_GP_PIN(1, 2),
+};
+static const unsigned int du_rgb666_mux[] = {
+ DU_DR7_MARK, DU_DR6_MARK, DU_DR5_MARK, DU_DR4_MARK,
+ DU_DR3_MARK, DU_DR2_MARK,
+ DU_DG7_MARK, DU_DG6_MARK, DU_DG5_MARK, DU_DG4_MARK,
+ DU_DG3_MARK, DU_DG2_MARK,
+ DU_DB7_MARK, DU_DB6_MARK, DU_DB5_MARK, DU_DB4_MARK,
+ DU_DB3_MARK, DU_DB2_MARK,
+};
+static const unsigned int du_rgb888_pins[] = {
+ /* R[7:0], G[7:0], B[7:0] */
+ RCAR_GP_PIN(0, 15), RCAR_GP_PIN(0, 14), RCAR_GP_PIN(0, 13),
+ RCAR_GP_PIN(0, 12), RCAR_GP_PIN(0, 11), RCAR_GP_PIN(0, 10),
+ RCAR_GP_PIN(0, 9), RCAR_GP_PIN(0, 8),
+ RCAR_GP_PIN(1, 15), RCAR_GP_PIN(1, 14), RCAR_GP_PIN(1, 13),
+ RCAR_GP_PIN(1, 12), RCAR_GP_PIN(1, 19), RCAR_GP_PIN(1, 18),
+ RCAR_GP_PIN(1, 17), RCAR_GP_PIN(1, 16),
+ RCAR_GP_PIN(1, 7), RCAR_GP_PIN(1, 6), RCAR_GP_PIN(1, 5),
+ RCAR_GP_PIN(1, 4), RCAR_GP_PIN(1, 3), RCAR_GP_PIN(1, 2),
+ RCAR_GP_PIN(1, 1), RCAR_GP_PIN(1, 0),
+};
+static const unsigned int du_rgb888_mux[] = {
+ DU_DR7_MARK, DU_DR6_MARK, DU_DR5_MARK, DU_DR4_MARK,
+ DU_DR3_MARK, DU_DR2_MARK, DU_DR1_MARK, DU_DR0_MARK,
+ DU_DG7_MARK, DU_DG6_MARK, DU_DG5_MARK, DU_DG4_MARK,
+ DU_DG3_MARK, DU_DG2_MARK, DU_DG1_MARK, DU_DG0_MARK,
+ DU_DB7_MARK, DU_DB6_MARK, DU_DB5_MARK, DU_DB4_MARK,
+ DU_DB3_MARK, DU_DB2_MARK, DU_DB1_MARK, DU_DB0_MARK,
+};
+static const unsigned int du_clk_out_0_pins[] = {
+ /* CLKOUT */
+ RCAR_GP_PIN(1, 27),
+};
+static const unsigned int du_clk_out_0_mux[] = {
+ DU_DOTCLKOUT0_MARK
+};
+static const unsigned int du_clk_out_1_pins[] = {
+ /* CLKOUT */
+ RCAR_GP_PIN(2, 3),
+};
+static const unsigned int du_clk_out_1_mux[] = {
+ DU_DOTCLKOUT1_MARK
+};
+static const unsigned int du_sync_pins[] = {
+ /* EXVSYNC/VSYNC, EXHSYNC/HSYNC */
+ RCAR_GP_PIN(2, 5), RCAR_GP_PIN(2, 4),
+};
+static const unsigned int du_sync_mux[] = {
+ DU_EXVSYNC_DU_VSYNC_MARK, DU_EXHSYNC_DU_HSYNC_MARK
+};
+static const unsigned int du_oddf_pins[] = {
+ /* EXDISP/EXODDF/EXCDE */
+ RCAR_GP_PIN(2, 2),
+};
+static const unsigned int du_oddf_mux[] = {
+ DU_EXODDF_DU_ODDF_DISP_CDE_MARK,
+};
+static const unsigned int du_cde_pins[] = {
+ /* CDE */
+ RCAR_GP_PIN(2, 0),
+};
+static const unsigned int du_cde_mux[] = {
+ DU_CDE_MARK,
+};
+static const unsigned int du_disp_pins[] = {
+ /* DISP */
+ RCAR_GP_PIN(2, 1),
+};
+static const unsigned int du_disp_mux[] = {
+ DU_DISP_MARK,
+};
/* - SCIF0 ------------------------------------------------------------------ */
static const unsigned int scif0_data_pins[] = {
@@ -1912,6 +1992,14 @@ static const unsigned int sdhi3_ds_mux[] = {
};
static const struct sh_pfc_pin_group pinmux_groups[] = {
+ SH_PFC_PIN_GROUP(du_rgb666),
+ SH_PFC_PIN_GROUP(du_rgb888),
+ SH_PFC_PIN_GROUP(du_clk_out_0),
+ SH_PFC_PIN_GROUP(du_clk_out_1),
+ SH_PFC_PIN_GROUP(du_sync),
+ SH_PFC_PIN_GROUP(du_oddf),
+ SH_PFC_PIN_GROUP(du_cde),
+ SH_PFC_PIN_GROUP(du_disp),
SH_PFC_PIN_GROUP(scif0_data),
SH_PFC_PIN_GROUP(scif0_clk),
SH_PFC_PIN_GROUP(scif0_ctrl),
@@ -1969,6 +2057,17 @@ static const struct sh_pfc_pin_group pinmux_groups[] = {
SH_PFC_PIN_GROUP(sdhi3_ds),
};
+static const char * const du_groups[] = {
+ "du_rgb666",
+ "du_rgb888",
+ "du_clk_out_0",
+ "du_clk_out_1",
+ "du_sync",
+ "du_oddf",
+ "du_cde",
+ "du_disp",
+};
+
static const char * const scif0_groups[] = {
"scif0_data",
"scif0_clk",
@@ -2058,6 +2157,7 @@ static const char * const sdhi3_groups[] = {
};
static const struct sh_pfc_function pinmux_functions[] = {
+ SH_PFC_FUNCTION(du),
SH_PFC_FUNCTION(scif0),
SH_PFC_FUNCTION(scif1),
SH_PFC_FUNCTION(scif2),
--
2.10.2
next reply other threads:[~2016-11-11 20:41 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-11 20:40 Niklas Söderlund [this message]
2016-11-12 1:49 ` [PATCH] pinctrl: sh-pfc: r8a7796: Add DU support Laurent Pinchart
2016-11-15 9:05 ` Geert Uytterhoeven
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161111204003.4022-1-niklas.soderlund@ragnatech.se \
--to=niklas.soderlund@ragnatech.se \
--cc=geert+renesas@glider.be \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=niklas.soderlund+renesas@ragnatech.se \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).