linux-gpio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Mika Westerberg <mika.westerberg@linux.intel.com>,
	linux-gpio@vger.kernel.org,
	Linus Walleij <linus.walleij@linaro.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
	Cristina Ciocan <cristina.ciocan@intel.com>
Subject: [PATCH v1 1/1] pinctrl: baytrail: Rectify debounce support
Date: Tue, 10 Jan 2017 16:03:19 +0200	[thread overview]
Message-ID: <20170110140319.26185-1-andriy.shevchenko@linux.intel.com> (raw)

The commit 658b476c742f ("pinctrl: baytrail: Add debounce configuration")
implements debounce for Baytrail pin control, but seems wasn't tested properly.

Rectify implementation here.

Fixes: 658b476c742f ("pinctrl: baytrail: Add debounce configuration")
Cc: Cristina Ciocan <cristina.ciocan@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/pinctrl/intel/pinctrl-baytrail.c | 28 +++++++++++++++++-----------
 1 file changed, 17 insertions(+), 11 deletions(-)

diff --git a/drivers/pinctrl/intel/pinctrl-baytrail.c b/drivers/pinctrl/intel/pinctrl-baytrail.c
index 71bbeb9321ba..079015385fd8 100644
--- a/drivers/pinctrl/intel/pinctrl-baytrail.c
+++ b/drivers/pinctrl/intel/pinctrl-baytrail.c
@@ -1092,6 +1092,7 @@ static int byt_pin_config_get(struct pinctrl_dev *pctl_dev, unsigned int offset,
 	enum pin_config_param param = pinconf_to_config_param(*config);
 	void __iomem *conf_reg = byt_gpio_reg(vg, offset, BYT_CONF0_REG);
 	void __iomem *val_reg = byt_gpio_reg(vg, offset, BYT_VAL_REG);
+	void __iomem *db_reg = byt_gpio_reg(vg, offset, BYT_DEBOUNCE_REG);
 	unsigned long flags;
 	u32 conf, pull, val, debounce;
 	u16 arg = 0;
@@ -1128,7 +1129,7 @@ static int byt_pin_config_get(struct pinctrl_dev *pctl_dev, unsigned int offset,
 			return -EINVAL;
 
 		raw_spin_lock_irqsave(&vg->lock, flags);
-		debounce = readl(byt_gpio_reg(vg, offset, BYT_DEBOUNCE_REG));
+		debounce = readl(db_reg);
 		raw_spin_unlock_irqrestore(&vg->lock, flags);
 
 		switch (debounce & BYT_DEBOUNCE_PULSE_MASK) {
@@ -1176,6 +1177,7 @@ static int byt_pin_config_set(struct pinctrl_dev *pctl_dev,
 	unsigned int param, arg;
 	void __iomem *conf_reg = byt_gpio_reg(vg, offset, BYT_CONF0_REG);
 	void __iomem *val_reg = byt_gpio_reg(vg, offset, BYT_VAL_REG);
+	void __iomem *db_reg = byt_gpio_reg(vg, offset, BYT_DEBOUNCE_REG);
 	unsigned long flags;
 	u32 conf, val, debounce;
 	int i, ret = 0;
@@ -1238,36 +1240,40 @@ static int byt_pin_config_set(struct pinctrl_dev *pctl_dev,
 
 			break;
 		case PIN_CONFIG_INPUT_DEBOUNCE:
-			debounce = readl(byt_gpio_reg(vg, offset,
-						      BYT_DEBOUNCE_REG));
-			conf &= ~BYT_DEBOUNCE_PULSE_MASK;
+			debounce = readl(db_reg);
+			debounce &= ~BYT_DEBOUNCE_PULSE_MASK;
 
 			switch (arg) {
+			case 0:
+				conf &= BYT_DEBOUNCE_EN;
+				break;
 			case 375:
-				conf |= BYT_DEBOUNCE_PULSE_375US;
+				debounce |= BYT_DEBOUNCE_PULSE_375US;
 				break;
 			case 750:
-				conf |= BYT_DEBOUNCE_PULSE_750US;
+				debounce |= BYT_DEBOUNCE_PULSE_750US;
 				break;
 			case 1500:
-				conf |= BYT_DEBOUNCE_PULSE_1500US;
+				debounce |= BYT_DEBOUNCE_PULSE_1500US;
 				break;
 			case 3000:
-				conf |= BYT_DEBOUNCE_PULSE_3MS;
+				debounce |= BYT_DEBOUNCE_PULSE_3MS;
 				break;
 			case 6000:
-				conf |= BYT_DEBOUNCE_PULSE_6MS;
+				debounce |= BYT_DEBOUNCE_PULSE_6MS;
 				break;
 			case 12000:
-				conf |= BYT_DEBOUNCE_PULSE_12MS;
+				debounce |= BYT_DEBOUNCE_PULSE_12MS;
 				break;
 			case 24000:
-				conf |= BYT_DEBOUNCE_PULSE_24MS;
+				debounce |= BYT_DEBOUNCE_PULSE_24MS;
 				break;
 			default:
 				ret = -EINVAL;
 			}
 
+			if (!ret)
+				writel(debounce, db_reg);
 			break;
 		default:
 			ret = -ENOTSUPP;
-- 
2.11.0


             reply	other threads:[~2017-01-10 14:03 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-01-10 14:03 Andy Shevchenko [this message]
2017-01-10 14:12 ` [PATCH v1 1/1] pinctrl: baytrail: Rectify debounce support Mika Westerberg
2017-01-10 14:35   ` Andy Shevchenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170110140319.26185-1-andriy.shevchenko@linux.intel.com \
    --to=andriy.shevchenko@linux.intel.com \
    --cc=cristina.ciocan@intel.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=mika.westerberg@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).