* [PATCH v3 1/4] gpio: mvebu: Add limited PWM support
[not found] ` <20170324141815.7252-1-ralph.sennhauser-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
@ 2017-03-24 14:18 ` Ralph Sennhauser
[not found] ` <20170324141815.7252-2-ralph.sennhauser-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2017-03-24 14:28 ` Andrew Lunn
2017-03-24 14:18 ` [PATCH v3 2/4] mvebu: xp: Add PWM properties to .dtsi files Ralph Sennhauser
1 sibling, 2 replies; 11+ messages in thread
From: Ralph Sennhauser @ 2017-03-24 14:18 UTC (permalink / raw)
To: linux-gpio-u79uwXL29TY76Z2rM5mHXA
Cc: Imre Kaloz, Andrew Lunn, Ralph Sennhauser, Thierry Reding,
Linus Walleij, Alexandre Courbot, Rob Herring, Mark Rutland,
Jason Cooper, Gregory Clement, Sebastian Hesselbarth,
Russell King, linux-pwm-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
From: Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
Armada 370/XP devices can 'blink' GPIO lines with a configurable on
and off period. This can be modelled as a PWM.
However, there are only two sets of PWM configuration registers for
all the GPIO lines. This driver simply allows a single GPIO line per
GPIO chip of 32 lines to be used as a PWM. Attempts to use more return
EBUSY.
Due to the interleaving of registers it is not simple to separate the
PWM driver from the GPIO driver. Thus the GPIO driver has been
extended with a PWM driver.
Signed-off-by: Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
URL: https://patchwork.ozlabs.org/patch/427287/
URL: https://patchwork.ozlabs.org/patch/427295/
[Ralph Sennhauser:
* Port forward
* Merge PWM portion into gpio-mvebu.c
* Switch to atomic PWM API
* Merge documentation patch
* Update MAINTAINERS]
Signed-off-by: Ralph Sennhauser <ralph.sennhauser-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
.../devicetree/bindings/gpio/gpio-mvebu.txt | 29 ++
MAINTAINERS | 2 +
drivers/gpio/gpio-mvebu.c | 317 ++++++++++++++++++++-
3 files changed, 336 insertions(+), 12 deletions(-)
diff --git a/Documentation/devicetree/bindings/gpio/gpio-mvebu.txt b/Documentation/devicetree/bindings/gpio/gpio-mvebu.txt
index a6f3bec..748bbc7 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-mvebu.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-mvebu.txt
@@ -38,6 +38,21 @@ Required properties:
- #gpio-cells: Should be two. The first cell is the pin number. The
second cell is reserved for flags, unused at the moment.
+Optional properties:
+
+In order to use the gpio lines in PWM mode, some additional optional
+properties are required. Only Armada 370 and XP support these properties.
+
+- reg: an additional register set is needed, for the GPIO Blink
+ Counter on/off registers.
+
+- reg-names: Must contain an entry "pwm" corresponding to the
+ additional register range needed for pwm operation.
+
+- #pwm-cells: Should be one. The first cell is the pin number.
+
+- clocks: Must be a phandle to the clock for the gpio controller.
+
Example:
gpio0: gpio@d0018100 {
@@ -51,3 +66,17 @@ Example:
#interrupt-cells = <2>;
interrupts = <16>, <17>, <18>, <19>;
};
+
+ gpio1: gpio@18140 {
+ compatible = "marvell,orion-gpio";
+ reg = <0x18140 0x40>, <0x181c8 0x08>;
+ reg-names = "gpio", "pwm";
+ ngpios = <17>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ #pwm-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <87>, <88>, <89>;
+ clocks = <&coreclk 0>;
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index c8f88d0..7fd2289 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -10291,6 +10291,8 @@ F: include/linux/pwm.h
F: drivers/pwm/
F: drivers/video/backlight/pwm_bl.c
F: include/linux/pwm_backlight.h
+F: drivers/gpio/gpio-mvebu.c
+F: Documentation/devicetree/bindings/gpio/gpio-mvebu.txt
PXA2xx/PXA3xx SUPPORT
M: Daniel Mack <daniel-cYrQPVfZoowdnm+yROfE0A@public.gmane.org>
diff --git a/drivers/gpio/gpio-mvebu.c b/drivers/gpio/gpio-mvebu.c
index fae4db6..46b5151 100644
--- a/drivers/gpio/gpio-mvebu.c
+++ b/drivers/gpio/gpio-mvebu.c
@@ -42,22 +42,34 @@
#include <linux/io.h>
#include <linux/of_irq.h>
#include <linux/of_device.h>
+#include <linux/pwm.h>
#include <linux/clk.h>
#include <linux/pinctrl/consumer.h>
#include <linux/irqchip/chained_irq.h>
+#include <linux/platform_device.h>
#include <linux/bitops.h>
+#include "gpiolib.h"
+
/*
* GPIO unit register offsets.
*/
-#define GPIO_OUT_OFF 0x0000
-#define GPIO_IO_CONF_OFF 0x0004
-#define GPIO_BLINK_EN_OFF 0x0008
-#define GPIO_IN_POL_OFF 0x000c
-#define GPIO_DATA_IN_OFF 0x0010
-#define GPIO_EDGE_CAUSE_OFF 0x0014
-#define GPIO_EDGE_MASK_OFF 0x0018
-#define GPIO_LEVEL_MASK_OFF 0x001c
+#define GPIO_OUT_OFF 0x0000
+#define GPIO_IO_CONF_OFF 0x0004
+#define GPIO_BLINK_EN_OFF 0x0008
+#define GPIO_IN_POL_OFF 0x000c
+#define GPIO_DATA_IN_OFF 0x0010
+#define GPIO_EDGE_CAUSE_OFF 0x0014
+#define GPIO_EDGE_MASK_OFF 0x0018
+#define GPIO_LEVEL_MASK_OFF 0x001c
+#define GPIO_BLINK_CNT_SELECT_OFF 0x0020
+
+/*
+ * PWM register offsets.
+ */
+#define PWM_BLINK_ON_DURATION_OFF 0x0
+#define PWM_BLINK_OFF_DURATION_OFF 0x4
+
/* The MV78200 has per-CPU registers for edge mask and level mask */
#define GPIO_EDGE_MASK_MV78200_OFF(cpu) ((cpu) ? 0x30 : 0x18)
@@ -78,6 +90,20 @@
#define MVEBU_MAX_GPIO_PER_BANK 32
+struct mvebu_pwm {
+ void __iomem *membase;
+ unsigned long clk_rate;
+ bool used;
+ struct pwm_chip chip;
+ spinlock_t lock;
+ struct mvebu_gpio_chip *mvchip;
+
+ /* Used to preserve GPIO/PWM registers across suspend/resume */
+ u32 blink_select;
+ u32 blink_on_duration;
+ u32 blink_off_duration;
+};
+
struct mvebu_gpio_chip {
struct gpio_chip chip;
spinlock_t lock;
@@ -87,6 +113,10 @@ struct mvebu_gpio_chip {
struct irq_domain *domain;
int soc_variant;
+ /* Used for PWM support */
+ struct clk *clk;
+ struct mvebu_pwm *mvpwm;
+
/* Used to preserve GPIO registers across suspend/resume */
u32 out_reg;
u32 io_conf_reg;
@@ -110,6 +140,12 @@ static void __iomem *mvebu_gpioreg_blink(struct mvebu_gpio_chip *mvchip)
return mvchip->membase + GPIO_BLINK_EN_OFF;
}
+static void __iomem *mvebu_gpioreg_blink_counter_select(struct mvebu_gpio_chip
+ *mvchip)
+{
+ return mvchip->membase + GPIO_BLINK_CNT_SELECT_OFF;
+}
+
static void __iomem *mvebu_gpioreg_io_conf(struct mvebu_gpio_chip *mvchip)
{
return mvchip->membase + GPIO_IO_CONF_OFF;
@@ -181,6 +217,20 @@ static void __iomem *mvebu_gpioreg_level_mask(struct mvebu_gpio_chip *mvchip)
}
/*
+ * Functions returning addresses of individual registers for a given
+ * PWM controller.
+ */
+static void __iomem *mvebu_pwmreg_blink_on_duration(struct mvebu_pwm *pwm)
+{
+ return pwm->membase + PWM_BLINK_ON_DURATION_OFF;
+}
+
+static void __iomem *mvebu_pwmreg_blink_off_duration(struct mvebu_pwm *pwm)
+{
+ return pwm->membase + PWM_BLINK_OFF_DURATION_OFF;
+}
+
+/*
* Functions implementing the gpio_chip methods
*/
static void mvebu_gpio_set(struct gpio_chip *chip, unsigned int pin, int value)
@@ -484,6 +534,240 @@ static void mvebu_gpio_irq_handler(struct irq_desc *desc)
chained_irq_exit(chip, desc);
}
+/*
+ * Functions implementing the pwm_chip methods
+ */
+static struct mvebu_pwm *to_mvebu_pwm(struct pwm_chip *chip)
+{
+ return container_of(chip, struct mvebu_pwm, chip);
+}
+
+static int mvebu_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ struct mvebu_pwm *mvpwm = to_mvebu_pwm(chip);
+ struct gpio_desc *desc = gpio_to_desc(pwm->pwm);
+ unsigned long flags;
+ int ret = 0;
+
+ spin_lock_irqsave(&mvpwm->lock, flags);
+ if (mvpwm->used) {
+ ret = -EBUSY;
+ } else {
+ if (!desc) {
+ ret = -ENODEV;
+ goto out;
+ }
+ ret = gpiod_request(desc, "mvebu-pwm");
+ if (ret)
+ goto out;
+
+ ret = gpiod_direction_output(desc, 0);
+ if (ret) {
+ gpiod_free(desc);
+ goto out;
+ }
+
+ mvpwm->used = true;
+ }
+
+out:
+ spin_unlock_irqrestore(&mvpwm->lock, flags);
+ return ret;
+}
+
+static void mvebu_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ struct mvebu_pwm *mvpwm = to_mvebu_pwm(chip);
+ struct gpio_desc *desc = gpio_to_desc(pwm->pwm);
+ unsigned long flags;
+
+ spin_lock_irqsave(&mvpwm->lock, flags);
+ gpiod_free(desc);
+ mvpwm->used = false;
+ spin_unlock_irqrestore(&mvpwm->lock, flags);
+}
+
+static void mvebu_pwm_get_state(struct pwm_chip *chip,
+ struct pwm_device *pwm,
+ struct pwm_state *state) {
+
+ struct mvebu_pwm *mvpwm = to_mvebu_pwm(chip);
+ struct mvebu_gpio_chip *mvchip = mvpwm->mvchip;
+ unsigned long long val;
+ unsigned long flags;
+ u32 u;
+
+ spin_lock_irqsave(&mvpwm->lock, flags);
+
+ val = (unsigned long long)
+ readl_relaxed(mvebu_pwmreg_blink_on_duration);
+ val *= NSEC_PER_SEC;
+ do_div(val, mvpwm->clk_rate);
+ if (val > UINT_MAX)
+ state->duty_cycle = UINT_MAX;
+ else if (val)
+ state->duty_cycle = val;
+ else
+ state->duty_cycle = 1;
+
+ val = (unsigned long long)
+ readl_relaxed(mvebu_pwmreg_blink_on_duration);
+ val *= NSEC_PER_SEC;
+ do_div(val, mvpwm->clk_rate);
+ if (val < state->duty_cycle)
+ state->period = 1;
+ else {
+ val -= state->duty_cycle;
+ if (val > UINT_MAX)
+ state->period = UINT_MAX;
+ else if (val)
+ state->period = val;
+ else
+ state->period = 1;
+ }
+
+ u = readl_relaxed(mvebu_gpioreg_blink(mvchip));
+ if (u)
+ state->enabled = true;
+ else
+ state->enabled = false;
+
+ spin_unlock_irqrestore(&mvpwm->lock, flags);
+}
+
+static int mvebu_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+ struct pwm_state *state)
+{
+ struct mvebu_pwm *mvpwm = to_mvebu_pwm(chip);
+ struct mvebu_gpio_chip *mvchip = mvpwm->mvchip;
+ unsigned long long val;
+ unsigned long flags;
+ unsigned int on, off;
+
+ val = (unsigned long long) mvpwm->clk_rate * state->duty_cycle;
+ do_div(val, NSEC_PER_SEC);
+ if (val > UINT_MAX)
+ return -EINVAL;
+ if (val)
+ on = val;
+ else
+ on = 1;
+
+ val = (unsigned long long) mvpwm->clk_rate *
+ (state->period - state->duty_cycle);
+ do_div(val, NSEC_PER_SEC);
+ if (val > UINT_MAX)
+ return -EINVAL;
+ if (val)
+ off = val;
+ else
+ off = 1;
+
+ spin_lock_irqsave(&mvpwm->lock, flags);
+
+ writel_relaxed(on, mvebu_pwmreg_blink_on_duration(mvpwm));
+ writel_relaxed(off, mvebu_pwmreg_blink_off_duration(mvpwm));
+ if (state->enabled)
+ mvebu_gpio_blink(&mvchip->chip, pwm->hwpwm, 1);
+ else
+ mvebu_gpio_blink(&mvchip->chip, pwm->hwpwm, 0);
+
+ spin_unlock_irqrestore(&mvpwm->lock, flags);
+
+ return 0;
+}
+
+static const struct pwm_ops mvebu_pwm_ops = {
+ .request = mvebu_pwm_request,
+ .free = mvebu_pwm_free,
+ .get_state = mvebu_pwm_get_state,
+ .apply = mvebu_pwm_apply,
+ .owner = THIS_MODULE,
+};
+
+static void __maybe_unused mvebu_pwm_suspend(struct mvebu_gpio_chip *mvchip)
+{
+ struct mvebu_pwm *mvpwm = mvchip->mvpwm;
+
+ mvpwm->blink_select =
+ readl_relaxed(mvebu_gpioreg_blink_counter_select(mvchip));
+ mvpwm->blink_on_duration =
+ readl_relaxed(mvebu_pwmreg_blink_on_duration(mvpwm));
+ mvpwm->blink_off_duration =
+ readl_relaxed(mvebu_pwmreg_blink_off_duration(mvpwm));
+}
+
+static void __maybe_unused mvebu_pwm_resume(struct mvebu_gpio_chip *mvchip)
+{
+ struct mvebu_pwm *mvpwm = mvchip->mvpwm;
+
+ writel_relaxed(mvpwm->blink_select,
+ mvebu_gpioreg_blink_counter_select(mvchip));
+ writel_relaxed(mvpwm->blink_on_duration,
+ mvebu_pwmreg_blink_on_duration(mvpwm));
+ writel_relaxed(mvpwm->blink_off_duration,
+ mvebu_pwmreg_blink_off_duration(mvpwm));
+}
+
+static int mvebu_pwm_probe(struct platform_device *pdev,
+ struct mvebu_gpio_chip *mvchip,
+ int id)
+{
+ struct device *dev = &pdev->dev;
+ struct mvebu_pwm *mvpwm;
+ struct resource *res;
+
+ /*
+ * Armada 370/XP has simple PWM support for GPIO lines. Other SoCs
+ * don't have this hardware. So if we don't have the necessary
+ * resource, it is not an error.
+ */
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pwm");
+ if (!res)
+ return 0;
+ /*
+ * There are only two sets of PWM configuration registers for all
+ * the GPIO lines on those SoCs. Use set A for all lines of GPIO
+ * chip with id 0, B for GPIO chip with id 1. Don't allow further
+ * GPIO chips to be used for PWM.
+ */
+ if (id == 0)
+ writel_relaxed(0, mvebu_gpioreg_blink_counter_select(mvchip));
+ else if (id == 1)
+ writel_relaxed(U32_MAX,
+ mvebu_gpioreg_blink_counter_select(mvchip));
+ else
+ return -EINVAL;
+
+ mvpwm = devm_kzalloc(dev, sizeof(struct mvebu_pwm), GFP_KERNEL);
+ if (!mvpwm)
+ return -ENOMEM;
+ mvchip->mvpwm = mvpwm;
+ mvpwm->mvchip = mvchip;
+
+ mvpwm->membase = devm_ioremap_resource(dev, res);
+ if (IS_ERR(mvpwm->membase))
+ return PTR_ERR(mvpwm->membase);
+
+ if (IS_ERR(mvchip->clk))
+ return PTR_ERR(mvchip->clk);
+
+ mvpwm->clk_rate = clk_get_rate(mvchip->clk);
+ if (!mvpwm->clk_rate) {
+ dev_err(dev, "failed to get clock rate\n");
+ return -EINVAL;
+ }
+
+ mvpwm->chip.dev = dev;
+ mvpwm->chip.ops = &mvebu_pwm_ops;
+ mvpwm->chip.base = mvchip->chip.base;
+ mvpwm->chip.npwm = mvchip->chip.ngpio;
+
+ spin_lock_init(&mvpwm->lock);
+
+ return pwmchip_add(&mvpwm->chip);
+}
+
#ifdef CONFIG_DEBUG_FS
#include <linux/seq_file.h>
@@ -600,6 +884,9 @@ static int mvebu_gpio_suspend(struct platform_device *pdev, pm_message_t state)
BUG();
}
+ if (IS_ENABLED(CONFIG_PWM))
+ mvebu_pwm_suspend(mvchip);
+
return 0;
}
@@ -643,6 +930,9 @@ static int mvebu_gpio_resume(struct platform_device *pdev)
BUG();
}
+ if (IS_ENABLED(CONFIG_PWM))
+ mvebu_pwm_resume(mvchip);
+
return 0;
}
@@ -654,7 +944,6 @@ static int mvebu_gpio_probe(struct platform_device *pdev)
struct resource *res;
struct irq_chip_generic *gc;
struct irq_chip_type *ct;
- struct clk *clk;
unsigned int ngpios;
bool have_irqs;
int soc_variant;
@@ -688,10 +977,10 @@ static int mvebu_gpio_probe(struct platform_device *pdev)
return id;
}
- clk = devm_clk_get(&pdev->dev, NULL);
+ mvchip->clk = devm_clk_get(&pdev->dev, NULL);
/* Not all SoCs require a clock.*/
- if (!IS_ERR(clk))
- clk_prepare_enable(clk);
+ if (!IS_ERR(mvchip->clk))
+ clk_prepare_enable(mvchip->clk);
mvchip->soc_variant = soc_variant;
mvchip->chip.label = dev_name(&pdev->dev);
@@ -822,6 +1111,10 @@ static int mvebu_gpio_probe(struct platform_device *pdev)
mvchip);
}
+ /* Armada 370/XP has simple PWM support for GPIO lines */
+ if (IS_ENABLED(CONFIG_PWM))
+ return mvebu_pwm_probe(pdev, mvchip, id);
+
return 0;
err_domain:
--
2.10.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 11+ messages in thread* [PATCH v3 2/4] mvebu: xp: Add PWM properties to .dtsi files
[not found] ` <20170324141815.7252-1-ralph.sennhauser-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2017-03-24 14:18 ` [PATCH v3 1/4] gpio: mvebu: Add limited PWM support Ralph Sennhauser
@ 2017-03-24 14:18 ` Ralph Sennhauser
1 sibling, 0 replies; 11+ messages in thread
From: Ralph Sennhauser @ 2017-03-24 14:18 UTC (permalink / raw)
To: linux-gpio-u79uwXL29TY76Z2rM5mHXA
Cc: Imre Kaloz, Andrew Lunn, Ralph Sennhauser, Thierry Reding,
Linus Walleij, Alexandre Courbot, Rob Herring, Mark Rutland,
Jason Cooper, Gregory Clement, Sebastian Hesselbarth,
Russell King, linux-pwm-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
From: Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
Add properties to the GPIO nodes to allow them to be also used as PWM
lines.
Signed-off-by: Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
URL: https://patchwork.ozlabs.org/patch/427294/
[Ralph Sennhauser:
* Use #pwm-cells = <1>
* Add missing reg-names / #pwm-cell properties to armada-xp-mv78260.dtsi
'gpio1' node]
Signed-off-by: Ralph Sennhauser <ralph.sennhauser-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
arch/arm/boot/dts/armada-370.dtsi | 10 ++++++++--
arch/arm/boot/dts/armada-xp-mv78230.dtsi | 10 ++++++++--
arch/arm/boot/dts/armada-xp-mv78260.dtsi | 10 ++++++++--
arch/arm/boot/dts/armada-xp-mv78460.dtsi | 10 ++++++++--
4 files changed, 32 insertions(+), 8 deletions(-)
diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi
index cc011c8..de7295c 100644
--- a/arch/arm/boot/dts/armada-370.dtsi
+++ b/arch/arm/boot/dts/armada-370.dtsi
@@ -138,24 +138,30 @@
gpio0: gpio@18100 {
compatible = "marvell,orion-gpio";
- reg = <0x18100 0x40>;
+ reg = <0x18100 0x40>, <0x181c0 0x08>;
+ reg-names = "gpio", "pwm";
ngpios = <32>;
gpio-controller;
#gpio-cells = <2>;
+ #pwm-cells = <1>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <82>, <83>, <84>, <85>;
+ clocks = <&coreclk 0>;
};
gpio1: gpio@18140 {
compatible = "marvell,orion-gpio";
- reg = <0x18140 0x40>;
+ reg = <0x18140 0x40>, <0x181c8 0x08>;
+ reg-names = "gpio", "pwm";
ngpios = <32>;
gpio-controller;
#gpio-cells = <2>;
+ #pwm-cells = <1>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <87>, <88>, <89>, <90>;
+ clocks = <&coreclk 0>;
};
gpio2: gpio@18180 {
diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
index 07c5090..9ae856b 100644
--- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
@@ -203,24 +203,30 @@
internal-regs {
gpio0: gpio@18100 {
compatible = "marvell,orion-gpio";
- reg = <0x18100 0x40>;
+ reg = <0x18100 0x40>, <0x181c0 0x08>;
+ reg-names = "gpio", "pwm";
ngpios = <32>;
gpio-controller;
#gpio-cells = <2>;
+ #pwm-cells = <1>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <82>, <83>, <84>, <85>;
+ clocks = <&coreclk 0>;
};
gpio1: gpio@18140 {
compatible = "marvell,orion-gpio";
- reg = <0x18140 0x40>;
+ reg = <0x18140 0x40>, <0x181c8 0x08>;
+ reg-names = "gpio", "pwm";
ngpios = <17>;
gpio-controller;
#gpio-cells = <2>;
+ #pwm-cells = <1>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <87>, <88>, <89>;
+ clocks = <&coreclk 0>;
};
};
};
diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
index 64e936a..11eb6ff 100644
--- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
@@ -286,24 +286,30 @@
internal-regs {
gpio0: gpio@18100 {
compatible = "marvell,orion-gpio";
- reg = <0x18100 0x40>;
+ reg = <0x18100 0x40>, <0x181c0 0x08>;
+ reg-names = "gpio", "pwm";
ngpios = <32>;
gpio-controller;
#gpio-cells = <2>;
+ #pwm-cells = <1>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <82>, <83>, <84>, <85>;
+ clocks = <&coreclk 0>;
};
gpio1: gpio@18140 {
compatible = "marvell,orion-gpio";
- reg = <0x18140 0x40>;
+ reg = <0x18140 0x40>, <0x181c8 0x08>;
+ reg-names = "gpio", "pwm";
ngpios = <32>;
gpio-controller;
#gpio-cells = <2>;
+ #pwm-cells = <1>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <87>, <88>, <89>, <90>;
+ clocks = <&coreclk 0>;
};
gpio2: gpio@18180 {
diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
index d1383dd..597b0d6 100644
--- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
@@ -324,24 +324,30 @@
internal-regs {
gpio0: gpio@18100 {
compatible = "marvell,orion-gpio";
- reg = <0x18100 0x40>;
+ reg = <0x18100 0x40>, <0x181c0 0x08>;
+ reg-names = "gpio", "pwm";
ngpios = <32>;
gpio-controller;
#gpio-cells = <2>;
+ #pwm-cells = <1>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <82>, <83>, <84>, <85>;
+ clocks = <&coreclk 0>;
};
gpio1: gpio@18140 {
compatible = "marvell,orion-gpio";
- reg = <0x18140 0x40>;
+ reg = <0x18140 0x40>, <0x181c8 0x08>;
+ reg-names = "gpio", "pwm";
ngpios = <32>;
gpio-controller;
#gpio-cells = <2>;
+ #pwm-cells = <1>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <87>, <88>, <89>, <90>;
+ clocks = <&coreclk 0>;
};
gpio2: gpio@18180 {
--
2.10.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 11+ messages in thread