From mboxrd@z Thu Jan 1 00:00:00 1970 From: Paul Cercueil Subject: [PATCH v4 05/14] MIPS: ingenic: Enable pinctrl for all ingenic SoCs Date: Sun, 2 Apr 2017 22:42:35 +0200 Message-ID: <20170402204244.14216-6-paul@crapouillou.net> References: <20170125185207.23902-2-paul@crapouillou.net> <20170402204244.14216-1-paul@crapouillou.net> Return-path: In-Reply-To: <20170402204244.14216-1-paul@crapouillou.net> Sender: linux-kernel-owner@vger.kernel.org To: Linus Walleij , Alexandre Courbot , Rob Herring , Mark Rutland , Ralf Baechle Cc: Boris Brezillon , Thierry Reding , Bartlomiej Zolnierkiewicz , Maarten ter Huurne , Lars-Peter Clausen , Paul Burton , james.hogan@imgtec.com, linux-gpio@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-mips@linux-mips.org, linux-mmc@vger.kernel.org, linux-mtd@lists.infradead.org, linux-pwm@vger.kernel.org, linux-fbdev@vger.kernel.org, Paul Cercueil List-Id: linux-gpio@vger.kernel.org There is a pinctrl driver for each of the Ingenic SoCs supported by the upstream Linux kernel. In order to switch away from the old GPIO platform code, we now enable the pinctrl drivers by default for the Ingenic SoCs. Signed-off-by: Paul Cercueil --- arch/mips/Kconfig | 1 + 1 file changed, 1 insertion(+) v2: No changes v3: No changes v4: No changes diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index a008a9f03072..b88cf931b829 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -363,6 +363,7 @@ config MACH_INGENIC select SYS_SUPPORTS_ZBOOT_UART16550 select DMA_NONCOHERENT select IRQ_MIPS_CPU + select PINCTRL select GPIOLIB select COMMON_CLK select GENERIC_IRQ_CHIP -- 2.11.0