linux-gpio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Doug Berger <opendmb@gmail.com>
To: Gregory Fong <gregory.0xf0@gmail.com>
Cc: Doug Berger <opendmb@gmail.com>,
	Linus Walleij <linus.walleij@linaro.org>,
	Brian Norris <computersforpeace@gmail.com>,
	Florian Fainelli <f.fainelli@gmail.com>,
	bcm-kernel-feedback-list@broadcom.com,
	linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/7] gpio: brcmstb: allow all instances to be wakeup sources
Date: Fri, 29 Sep 2017 20:40:51 -0700	[thread overview]
Message-ID: <20170930034057.15166-2-opendmb@gmail.com> (raw)
In-Reply-To: <20170930034057.15166-1-opendmb@gmail.com>

This commit allows a wakeup parent interrupt to be shared between
instances.

It also removes the redundant can_wake member of the private data
structure by using whether the parent_wake_irq has been defined to
indicate that the GPIO device can wake.

Fixes: 19a7b6940b78 ("gpio: brcmstb: Add interrupt and wakeup source support")
Signed-off-by: Doug Berger <opendmb@gmail.com>
---
 drivers/gpio/gpio-brcmstb.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/gpio/gpio-brcmstb.c b/drivers/gpio/gpio-brcmstb.c
index 27e92e57adae..7f39b160a4d5 100644
--- a/drivers/gpio/gpio-brcmstb.c
+++ b/drivers/gpio/gpio-brcmstb.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2015 Broadcom Corporation
+ * Copyright (C) 2015-2017 Broadcom
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
@@ -46,7 +46,6 @@ struct brcmstb_gpio_priv {
 	struct platform_device *pdev;
 	int parent_irq;
 	int gpio_base;
-	bool can_wake;
 	int parent_wake_irq;
 	struct notifier_block reboot_notifier;
 };
@@ -349,10 +348,11 @@ static int brcmstb_gpio_irq_setup(struct platform_device *pdev,
 	/* Ensures that all non-wakeup IRQs are disabled at suspend */
 	bank->irq_chip.flags = IRQCHIP_MASK_ON_SUSPEND;
 
-	if (IS_ENABLED(CONFIG_PM_SLEEP) && !priv->can_wake &&
+	if (IS_ENABLED(CONFIG_PM_SLEEP) && !priv->parent_wake_irq &&
 			of_property_read_bool(np, "wakeup-source")) {
 		priv->parent_wake_irq = platform_get_irq(pdev, 1);
 		if (priv->parent_wake_irq < 0) {
+			priv->parent_wake_irq = 0;
 			dev_warn(dev,
 				"Couldn't get wake IRQ - GPIOs will not be able to wake from sleep");
 		} else {
@@ -364,8 +364,9 @@ static int brcmstb_gpio_irq_setup(struct platform_device *pdev,
 			device_set_wakeup_capable(dev, true);
 			device_wakeup_enable(dev);
 			err = devm_request_irq(dev, priv->parent_wake_irq,
-					brcmstb_gpio_wake_irq_handler, 0,
-					"brcmstb-gpio-wake", priv);
+					       brcmstb_gpio_wake_irq_handler,
+					       IRQF_SHARED,
+					       "brcmstb-gpio-wake", priv);
 
 			if (err < 0) {
 				dev_err(dev, "Couldn't request wake IRQ");
@@ -375,11 +376,10 @@ static int brcmstb_gpio_irq_setup(struct platform_device *pdev,
 			priv->reboot_notifier.notifier_call =
 				brcmstb_gpio_reboot;
 			register_reboot_notifier(&priv->reboot_notifier);
-			priv->can_wake = true;
 		}
 	}
 
-	if (priv->can_wake)
+	if (priv->parent_wake_irq)
 		bank->irq_chip.irq_set_wake = brcmstb_gpio_irq_set_wake;
 
 	err = gpiochip_irqchip_add(&bank->gc, &bank->irq_chip, 0,
-- 
2.14.1

  reply	other threads:[~2017-09-30  3:40 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-09-30  3:40 [PATCH 0/7] gpio: brcmstb: improved interrupt and wake support Doug Berger
2017-09-30  3:40 ` Doug Berger [this message]
2017-10-04  1:40   ` [PATCH 1/7] gpio: brcmstb: allow all instances to be wakeup sources Gregory Fong
2017-10-07 10:52   ` Linus Walleij
2017-09-30  3:40 ` [PATCH 2/7] gpio: brcmstb: release the bgpio lock during irq handlers Doug Berger
2017-10-04  1:55   ` Gregory Fong
2017-10-04  2:09     ` Doug Berger
2017-10-04  3:07       ` Gregory Fong
2017-09-30  3:40 ` [PATCH 3/7] gpio: brcmstb: switch to handle_level_irq flow Doug Berger
2017-10-04  1:59   ` Gregory Fong
2017-09-30  3:40 ` [PATCH 4/7] gpio: brcmstb: correct the configuration of level interrupts Doug Berger
2017-10-04  2:03   ` Gregory Fong
2017-09-30  3:40 ` [PATCH 5/7] gpio: brcmstb: enable masking of interrupts when changing type Doug Berger
2017-10-04  2:10   ` Gregory Fong
2017-10-04  2:22     ` Doug Berger
2017-10-04  3:15       ` Gregory Fong
2017-09-30  3:40 ` [PATCH 6/7] gpio: brcmstb: consolidate interrupt domains Doug Berger
2017-10-04  3:03   ` Gregory Fong
2017-10-04 21:24     ` Doug Berger
2017-10-16 23:04       ` Doug Berger
2017-10-19  7:57       ` Gregory Fong
2017-10-19 18:25         ` Doug Berger
2017-09-30  3:40 ` [PATCH 7/7] gpio: brcmstb: implement suspend/resume/shutdown Doug Berger
2017-10-19  9:03   ` Gregory Fong
2017-10-19 18:39     ` Doug Berger
2017-10-21  0:54       ` Gregory Fong
2017-10-23 23:06         ` Doug Berger
2017-09-30  5:34 ` [PATCH 0/7] gpio: brcmstb: improved interrupt and wake support Florian Fainelli
2017-10-07 10:54 ` Linus Walleij

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170930034057.15166-2-opendmb@gmail.com \
    --to=opendmb@gmail.com \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=computersforpeace@gmail.com \
    --cc=f.fainelli@gmail.com \
    --cc=gregory.0xf0@gmail.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).