* [PATCH] gpio: mark expected switch fall-throughs
@ 2017-10-13 20:43 Gustavo A. R. Silva
2017-10-16 11:58 ` Linus Walleij
0 siblings, 1 reply; 2+ messages in thread
From: Gustavo A. R. Silva @ 2017-10-13 20:43 UTC (permalink / raw)
To: Joel Stanley, Linus Walleij, Alban Bedel
Cc: linux-gpio, linux-kernel, Gustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
---
This code was tested by compilation only (GCC 7.2.0 was used).
Please, verify if the actual intention of the code is to fall through.
drivers/gpio/gpio-aspeed.c | 3 +++
drivers/gpio/gpio-ath79.c | 1 +
drivers/gpio/gpio-stmpe.c | 4 ++--
3 files changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/gpio/gpio-aspeed.c b/drivers/gpio/gpio-aspeed.c
index c269cc1..bdda32a 100644
--- a/drivers/gpio/gpio-aspeed.c
+++ b/drivers/gpio/gpio-aspeed.c
@@ -411,13 +411,16 @@ static int aspeed_gpio_set_type(struct irq_data *d, unsigned int type)
switch (type & IRQ_TYPE_SENSE_MASK) {
case IRQ_TYPE_EDGE_BOTH:
type2 |= bit;
+ /* fall through */
case IRQ_TYPE_EDGE_RISING:
type0 |= bit;
+ /* fall through */
case IRQ_TYPE_EDGE_FALLING:
handler = handle_edge_irq;
break;
case IRQ_TYPE_LEVEL_HIGH:
type0 |= bit;
+ /* fall through */
case IRQ_TYPE_LEVEL_LOW:
type1 |= bit;
handler = handle_level_irq;
diff --git a/drivers/gpio/gpio-ath79.c b/drivers/gpio/gpio-ath79.c
index f33d4a5..02e56e0 100644
--- a/drivers/gpio/gpio-ath79.c
+++ b/drivers/gpio/gpio-ath79.c
@@ -132,6 +132,7 @@ static int ath79_gpio_irq_set_type(struct irq_data *data,
case IRQ_TYPE_LEVEL_HIGH:
polarity |= mask;
+ /* fall through */
case IRQ_TYPE_LEVEL_LOW:
type |= mask;
break;
diff --git a/drivers/gpio/gpio-stmpe.c b/drivers/gpio/gpio-stmpe.c
index 16cbc57..001a89d 100644
--- a/drivers/gpio/gpio-stmpe.c
+++ b/drivers/gpio/gpio-stmpe.c
@@ -299,7 +299,7 @@ static void stmpe_dbg_show_one(struct seq_file *s,
if (ret < 0)
return;
edge_det = !!(ret & mask);
-
+ /* fall through */
case STMPE1801:
rise_reg = stmpe->regs[STMPE_IDX_GPRER_LSB + bank];
fall_reg = stmpe->regs[STMPE_IDX_GPFER_LSB + bank];
@@ -312,7 +312,7 @@ static void stmpe_dbg_show_one(struct seq_file *s,
if (ret < 0)
return;
fall = !!(ret & mask);
-
+ /* fall through */
case STMPE801:
case STMPE1600:
irqen_reg = stmpe->regs[STMPE_IDX_IEGPIOR_LSB + bank];
--
2.7.4
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH] gpio: mark expected switch fall-throughs
2017-10-13 20:43 [PATCH] gpio: mark expected switch fall-throughs Gustavo A. R. Silva
@ 2017-10-16 11:58 ` Linus Walleij
0 siblings, 0 replies; 2+ messages in thread
From: Linus Walleij @ 2017-10-16 11:58 UTC (permalink / raw)
To: Gustavo A. R. Silva
Cc: Joel Stanley, Alban Bedel, linux-gpio@vger.kernel.org,
linux-kernel@vger.kernel.org
On Fri, Oct 13, 2017 at 10:43 PM, Gustavo A. R. Silva
<garsilva@embeddedor.com> wrote:
> In preparation to enabling -Wimplicit-fallthrough, mark switch cases
> where we are expecting to fall through.
>
> Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Seems helpful. Patch applied.
Yours,
Linus Walleij
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2017-10-16 11:58 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2017-10-13 20:43 [PATCH] gpio: mark expected switch fall-throughs Gustavo A. R. Silva
2017-10-16 11:58 ` Linus Walleij
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).