[PATCH v2 0/5] Change ISA_BUS_API dependency to selection

[PATCH v2 0/5] Change ISA_BUS_API dependency to selection

[William Breathitt Gray]

Changes in v2:
  - Remove select ISA_BUS_API line from ISA_BUS Kconfig option
  - Update ISA_BUS help text to reflect updated use
  - Add explicit EXPERT dependency for PC104 Kconfig option

The ISA_BUS_API Kconfig option enables the compilation of the ISA bus
driver. The ISA bus driver does not perform any hardware interaction,
and is instead just a thin layer of software abstraction to eliminate
boilerplate code common to ISA-style device drivers. Since ISA_BUS_API
has no dependencies and does not jeopardize the integrity of the system
when enabled, drivers should select it when the ISA bus driver
functionality is needed.

Originally, when the ISA_BUS_API Kconfig option was introduced, it
served a dual-purpose of masking drivers ISA-style devices not commonly
found for desktop systems, such as the PC/104 device drivers. This
secondary semantic was inappropriate for the ISA_BUS_API option, and
proper masking of these device drivers is now accomplished via dedicated
Kconfig options such as CONFIG_PC104.

Linus, please pickup this entire patchset through your GPIO subsystem
tree; a recursive dependency error is present if these patches are
cherry-picked (see https://lkml.org/lkml/2017/12/26/235), so they should
be merged together in the same tree.

Maciej, this patchset resolves the recursive dependency issue you
encountered, so now you should be able to submit your Winbond GPIO
driver with the ISA_BUS_API selection as desired.

William Breathitt Gray (5):
  iio: Change ISA_BUS_API dependency to selection
  watchdog: Change ISA_BUS_API dependency to selection
  gpio: Change ISA_BUS_API dependency to selection
  isa: Remove ISA_BUS_API selection for ISA_BUS
  pc104: Add EXPERT dependency for PC104 Kconfig option

 arch/x86/Kconfig            | 10 ++++++----
 drivers/gpio/Kconfig        | 14 +++++++++-----
 drivers/iio/adc/Kconfig     |  3 ++-
 drivers/iio/counter/Kconfig |  3 ++-
 drivers/iio/dac/Kconfig     |  3 ++-
 drivers/watchdog/Kconfig    |  3 ++-
 init/Kconfig                |  2 +-
 7 files changed, 24 insertions(+), 14 deletions(-)

-- 
2.15.1

[PATCH v2 1/5] iio: Change ISA_BUS_API dependency to selection

[William Breathitt Gray]

The ISA_BUS_API Kconfig option enables the compilation of the ISA bus
driver. The ISA bus driver does not perform any hardware interaction,
and is instead just a thin layer of software abstraction to eliminate
boilerplate code common to ISA-style device drivers. Since ISA_BUS_API
has no dependencies and does not jeopardize the integrity of the system
when enabled, drivers should select it when the ISA bus driver
functionality is needed.

Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
---
 drivers/iio/adc/Kconfig     | 3 ++-
 drivers/iio/counter/Kconfig | 3 ++-
 drivers/iio/dac/Kconfig     | 3 ++-
 3 files changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index ef86296b8b0d..7c00e5858693 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -658,7 +658,8 @@ config STM32_ADC
 
 config STX104
 	tristate "Apex Embedded Systems STX104 driver"
-	depends on PC104 && X86 && ISA_BUS_API
+	depends on PC104 && X86
+	select ISA_BUS_API
 	select GPIOLIB
 	help
 	  Say yes here to build support for the Apex Embedded Systems STX104
diff --git a/drivers/iio/counter/Kconfig b/drivers/iio/counter/Kconfig
index 474e1ac4e7c0..bf1e559ad7cd 100644
--- a/drivers/iio/counter/Kconfig
+++ b/drivers/iio/counter/Kconfig
@@ -7,7 +7,8 @@ menu "Counters"
 
 config 104_QUAD_8
 	tristate "ACCES 104-QUAD-8 driver"
-	depends on PC104 && X86 && ISA_BUS_API
+	depends on PC104 && X86
+	select ISA_BUS_API
 	help
 	  Say yes here to build support for the ACCES 104-QUAD-8 quadrature
 	  encoder counter/interface device family (104-QUAD-8, 104-QUAD-4).
diff --git a/drivers/iio/dac/Kconfig b/drivers/iio/dac/Kconfig
index 965d5c0d2468..76db0768e454 100644
--- a/drivers/iio/dac/Kconfig
+++ b/drivers/iio/dac/Kconfig
@@ -195,7 +195,8 @@ config AD7303
 
 config CIO_DAC
 	tristate "Measurement Computing CIO-DAC IIO driver"
-	depends on X86 && ISA_BUS_API
+	depends on X86 && (ISA_BUS || PC104)
+	select ISA_BUS_API
 	help
 	  Say yes here to build support for the Measurement Computing CIO-DAC
 	  analog output device family (CIO-DAC16, CIO-DAC08, PC104-DAC06). The
-- 
2.15.1

[PATCH v2 2/5] watchdog: Change ISA_BUS_API dependency to selection

[William Breathitt Gray]

The ISA_BUS_API Kconfig option enables the compilation of the ISA bus
driver. The ISA bus driver does not perform any hardware interaction,
and is instead just a thin layer of software abstraction to eliminate
boilerplate code common to ISA-style device drivers. Since ISA_BUS_API
has no dependencies and does not jeopardize the integrity of the system
when enabled, drivers should select it when the ISA bus driver
functionality is needed.

Cc: Wim Van Sebroeck <wim@iguana.be>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
---
 drivers/watchdog/Kconfig | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index ca200d1f310a..c05d5d20eebf 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -864,7 +864,8 @@ config ALIM7101_WDT
 
 config EBC_C384_WDT
 	tristate "WinSystems EBC-C384 Watchdog Timer"
-	depends on X86 && ISA_BUS_API
+	depends on X86
+	select ISA_BUS_API
 	select WATCHDOG_CORE
 	help
 	  Enables watchdog timer support for the watchdog timer on the
-- 
2.15.1

[PATCH v2 3/5] gpio: Change ISA_BUS_API dependency to selection

[William Breathitt Gray]

The ISA_BUS_API Kconfig option enables the compilation of the ISA bus
driver. The ISA bus driver does not perform any hardware interaction,
and is instead just a thin layer of software abstraction to eliminate
boilerplate code common to ISA-style device drivers. Since ISA_BUS_API
has no dependencies and does not jeopardize the integrity of the system
when enabled, drivers should select it when the ISA bus driver
functionality is needed.

Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
---
 drivers/gpio/Kconfig | 14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 395669bfcc26..36ad9ce3dc58 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -590,7 +590,8 @@ menu "Port-mapped I/O GPIO drivers"
 
 config GPIO_104_DIO_48E
 	tristate "ACCES 104-DIO-48E GPIO support"
-	depends on PC104 && ISA_BUS_API
+	depends on PC104
+	select ISA_BUS_API
 	select GPIOLIB_IRQCHIP
 	help
 	  Enables GPIO support for the ACCES 104-DIO-48E series (104-DIO-48E,
@@ -600,7 +601,8 @@ config GPIO_104_DIO_48E
 
 config GPIO_104_IDIO_16
 	tristate "ACCES 104-IDIO-16 GPIO support"
-	depends on PC104 && ISA_BUS_API
+	depends on PC104
+	select ISA_BUS_API
 	select GPIOLIB_IRQCHIP
 	help
 	  Enables GPIO support for the ACCES 104-IDIO-16 family (104-IDIO-16,
@@ -611,7 +613,8 @@ config GPIO_104_IDIO_16
 
 config GPIO_104_IDI_48
 	tristate "ACCES 104-IDI-48 GPIO support"
-	depends on PC104 && ISA_BUS_API
+	depends on PC104
+	select ISA_BUS_API
 	select GPIOLIB_IRQCHIP
 	help
 	  Enables GPIO support for the ACCES 104-IDI-48 family (104-IDI-48A,
@@ -631,7 +634,8 @@ config GPIO_F7188X
 
 config GPIO_GPIO_MM
 	tristate "Diamond Systems GPIO-MM GPIO support"
-	depends on PC104 && ISA_BUS_API
+	depends on PC104
+	select ISA_BUS_API
 	help
 	  Enables GPIO support for the Diamond Systems GPIO-MM and GPIO-MM-12.
 
@@ -700,7 +704,7 @@ config GPIO_TS5500
 
 config GPIO_WS16C48
 	tristate "WinSystems WS16C48 GPIO support"
-	depends on ISA_BUS_API
+	select ISA_BUS_API
 	select GPIOLIB_IRQCHIP
 	help
 	  Enables GPIO support for the WinSystems WS16C48. The base port
-- 
2.15.1

[PATCH v2 4/5] isa: Remove ISA_BUS_API selection for ISA_BUS

[William Breathitt Gray]

ISA_BUS_API is selected by drivers themselves when necessary. The
ISA_BUS Kconfig option is now simply a mask for true ISA device drivers
and relevant configuration. For now, the ISA_BUS Kconfig option is only
available for X86, but may be added for other arch builds in the future
if the need arises.

Signed-off-by: William Breathitt Gray <vilhelm.gray-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
 arch/x86/Kconfig | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 8eed3f94bfc7..5478c5beb302 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -2608,11 +2608,13 @@ config PCI_CNB20LE_QUIRK
 source "drivers/pci/Kconfig"
 
 config ISA_BUS
-	bool "ISA-style bus support on modern systems" if EXPERT
-	select ISA_BUS_API
+	bool "ISA bus support on modern systems" if EXPERT
 	help
-	  Enables ISA-style drivers on modern systems. This is necessary to
-	  support PC/104 devices on X86_64 platforms.
+	  Expose ISA bus device drivers and options available for selection and
+	  configuration. Enable this option if your target machine has an ISA
+	  bus. ISA is an older system, displaced by PCI and newer bus
+	  architectures -- if your target machine is modern, it probably does
+	  not have an ISA bus.
 
 	  If unsure, say N.
 
-- 
2.15.1

--
To unsubscribe from this list: send the line "unsubscribe linux-watchdog" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v2 5/5] pc104: Add EXPERT dependency for PC104 Kconfig option

[William Breathitt Gray]

PC/104 device driver Kconfig options previously had an implicit EXPERT
dependency by way of an explicit ISA_BUS_API dependency. Now that these
driver Kconfig options select ISA_BUS_API rather than depend on it, the
PC104 Kconfig option should have an explicit EXPERT dependency.

The PC/104 form factor and bus architecture are common in embedded
and specialized systems, but uncommon in typical desktop setups. For
this reason, it is best to mask these devices and configurations via the
EXPERT Kconfig option because the majority of users will never need to
concern themselves with PC/104.

Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
---
 init/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/init/Kconfig b/init/Kconfig
index 2934249fba46..227ca1300d1b 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -1420,7 +1420,7 @@ config PERF_USE_VMALLOC
 	  See tools/perf/design.txt for details
 
 config PC104
-	bool "PC/104 support"
+	bool "PC/104 support" if EXPERT
 	help
 	  Expose PC/104 form factor device drivers and options available for
 	  selection and configuration. Enable this option if your target
-- 
2.15.1

Re: [PATCH v2 1/5] iio: Change ISA_BUS_API dependency to selection

[Jonathan Cameron]

On Fri, 29 Dec 2017 15:13:19 -0500
William Breathitt Gray <vilhelm.gray-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:

> The ISA_BUS_API Kconfig option enables the compilation of the ISA bus
> driver. The ISA bus driver does not perform any hardware interaction,
> and is instead just a thin layer of software abstraction to eliminate
> boilerplate code common to ISA-style device drivers. Since ISA_BUS_API
> has no dependencies and does not jeopardize the integrity of the system
> when enabled, drivers should select it when the ISA bus driver
> functionality is needed.
> 
> Cc: Jonathan Cameron <jic23-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
> Cc: Hartmut Knaack <knaack.h-Mmb7MZpHnFY@public.gmane.org>
> Cc: Lars-Peter Clausen <lars-Qo5EllUWu/uELgA04lAiVw@public.gmane.org>
> Cc: Peter Meerwald-Stadler <pmeerw-jW+XmwGofnusTnJN9+BGXg@public.gmane.org>
> Signed-off-by: William Breathitt Gray <vilhelm.gray-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
> ---
>  drivers/iio/adc/Kconfig     | 3 ++-
>  drivers/iio/counter/Kconfig | 3 ++-
>  drivers/iio/dac/Kconfig     | 3 ++-
>  3 files changed, 6 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
> index ef86296b8b0d..7c00e5858693 100644
> --- a/drivers/iio/adc/Kconfig
> +++ b/drivers/iio/adc/Kconfig
> @@ -658,7 +658,8 @@ config STM32_ADC
>  
>  config STX104
>  	tristate "Apex Embedded Systems STX104 driver"
> -	depends on PC104 && X86 && ISA_BUS_API
> +	depends on PC104 && X86
> +	select ISA_BUS_API
>  	select GPIOLIB
>  	help
>  	  Say yes here to build support for the Apex Embedded Systems STX104
> diff --git a/drivers/iio/counter/Kconfig b/drivers/iio/counter/Kconfig
> index 474e1ac4e7c0..bf1e559ad7cd 100644
> --- a/drivers/iio/counter/Kconfig
> +++ b/drivers/iio/counter/Kconfig
> @@ -7,7 +7,8 @@ menu "Counters"
>  
>  config 104_QUAD_8
>  	tristate "ACCES 104-QUAD-8 driver"
> -	depends on PC104 && X86 && ISA_BUS_API
> +	depends on PC104 && X86
> +	select ISA_BUS_API
>  	help
>  	  Say yes here to build support for the ACCES 104-QUAD-8 quadrature
>  	  encoder counter/interface device family (104-QUAD-8, 104-QUAD-4).
> diff --git a/drivers/iio/dac/Kconfig b/drivers/iio/dac/Kconfig
> index 965d5c0d2468..76db0768e454 100644
> --- a/drivers/iio/dac/Kconfig
> +++ b/drivers/iio/dac/Kconfig
> @@ -195,7 +195,8 @@ config AD7303
>  
>  config CIO_DAC
>  	tristate "Measurement Computing CIO-DAC IIO driver"
> -	depends on X86 && ISA_BUS_API
> +	depends on X86 && (ISA_BUS || PC104)
> +	select ISA_BUS_API
>  	help
>  	  Say yes here to build support for the Measurement Computing CIO-DAC
>  	  analog output device family (CIO-DAC16, CIO-DAC08, PC104-DAC06). The

--
To unsubscribe from this list: send the line "unsubscribe linux-watchdog" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v2 0/5] Change ISA_BUS_API dependency to selection

[Linus Walleij]

On Fri, Dec 29, 2017 at 9:13 PM, William Breathitt Gray
<vilhelm.gray-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:

> Linus, please pickup this entire patchset through your GPIO subsystem
> tree; a recursive dependency error is present if these patches are
> cherry-picked (see https://lkml.org/lkml/2017/12/26/235), so they should
> be merged together in the same tree.

OK I just need a bunch of ACKs so giving subsystem maintainers some
days to come back on this.

Yours,
Linus Walleij

Re: [PATCH v2 0/5] Change ISA_BUS_API dependency to selection

[William Breathitt Gray]

On Tue, Jan 02, 2018 at 10:29:30AM +0100, Linus Walleij wrote:
>On Fri, Dec 29, 2017 at 9:13 PM, William Breathitt Gray
><vilhelm.gray@gmail.com> wrote:
>
>> Linus, please pickup this entire patchset through your GPIO subsystem
>> tree; a recursive dependency error is present if these patches are
>> cherry-picked (see https://lkml.org/lkml/2017/12/26/235), so they should
>> be merged together in the same tree.
>
>OK I just need a bunch of ACKs so giving subsystem maintainers some
>days to come back on this.
>
>Yours,
>Linus Walleij

Hi Linus,

Do you have any objections to picking up this patchset now; or would you
prefer to wait for some more input from the other maintainers?

William Breathitt Gray