[PATCH] gpio: ftgpio010: Fix some more registers

[Linus Walleij <linus.walleij@linaro.org>]

There is a register for "bypass" which seems to not be
used for anything in some silicon designs, but may be used
in others, and there is both a raw and masked interrupt
status register.

Define them all for clarity, no semantic changes.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
 drivers/gpio/gpio-ftgpio010.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/gpio/gpio-ftgpio010.c b/drivers/gpio/gpio-ftgpio010.c
index b7a3a2db699b..e80634c464a9 100644
--- a/drivers/gpio/gpio-ftgpio010.c
+++ b/drivers/gpio/gpio-ftgpio010.c
@@ -21,12 +21,14 @@
 #define GPIO_DATA_OUT		0x00
 #define GPIO_DATA_IN		0x04
 #define GPIO_DIR		0x08
+#define GPIO_BYPASS_IN		0x0C
 #define GPIO_DATA_SET		0x10
 #define GPIO_DATA_CLR		0x14
 #define GPIO_PULL_EN		0x18
 #define GPIO_PULL_TYPE		0x1C
 #define GPIO_INT_EN		0x20
-#define GPIO_INT_STAT		0x24
+#define GPIO_INT_STAT_RAW	0x24
+#define GPIO_INT_STAT_MASKED	0x28
 #define GPIO_INT_MASK		0x2C
 #define GPIO_INT_CLR		0x30
 #define GPIO_INT_TYPE		0x34
@@ -147,7 +149,7 @@ static void ftgpio_gpio_irq_handler(struct irq_desc *desc)
 
 	chained_irq_enter(irqchip, desc);
 
-	stat = readl(g->base + GPIO_INT_STAT);
+	stat = readl(g->base + GPIO_INT_STAT_RAW);
 	if (stat)
 		for_each_set_bit(offset, &stat, gc->ngpio)
 			generic_handle_irq(irq_find_mapping(gc->irq.domain,
-- 
2.14.3