From mboxrd@z Thu Jan 1 00:00:00 1970 From: Boris Brezillon Subject: Re: [RFC PATCH v2 03/12] ARM: OMAP1: ams-delta: Provide GPIO lookup table for NAND data port Date: Tue, 7 Aug 2018 18:59:58 +0200 Message-ID: <20180807185958.2fc6e22b@bbrezillon> References: <20180718235710.18242-1-jmkrzyszt@gmail.com> <20180806222918.12644-1-jmkrzyszt@gmail.com> <20180806222918.12644-4-jmkrzyszt@gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20180806222918.12644-4-jmkrzyszt@gmail.com> Sender: linux-kernel-owner@vger.kernel.org To: Janusz Krzysztofik Cc: Linus Walleij , Jonathan Corbet , Miquel Raynal , Richard Weinberger , David Woodhouse , Brian Norris , Marek Vasut , Tony Lindgren , Aaro Koskinen , linux-arm-kernel@lists.infradead.org, linux-omap@vger.kernel.org, linux-mtd@lists.infradead.org, linux-doc@vger.kernel.org, linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org List-Id: linux-gpio@vger.kernel.org On Tue, 7 Aug 2018 00:29:09 +0200 Janusz Krzysztofik wrote: > Data port used by Amstrad Delta NAND driver is actually an OMAP MPUIO > device, already under control of gpio-omap driver. The NAND driver > gets access to the port by ioremapping it and performs read/write > operations. That is done without any proteciton from other users > legally manipulating the port pins over GPIO API. > > The plan is to convert the driver to access the port over GPIO consumer > API. Before that is implemented, the driver can already obtain > exclusive access to the port by requesting an array of its GPIO > descriptors. > > Add respective entries to the NAND GPIO lookup table. > > Signed-off-by: Janusz Krzysztofik Reviewed-by: Boris Brezillon > --- > arch/arm/mach-omap1/board-ams-delta.c | 11 ++++++++++- > 1 file changed, 10 insertions(+), 1 deletion(-) > > diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c > index eedacdfe9725..16f7bbe47607 100644 > --- a/arch/arm/mach-omap1/board-ams-delta.c > +++ b/arch/arm/mach-omap1/board-ams-delta.c > @@ -337,7 +337,8 @@ static struct platform_device ams_delta_nand_device = { > .resource = ams_delta_nand_resources, > }; > > -#define OMAP_GPIO_LABEL "gpio-0-15" > +#define OMAP_GPIO_LABEL "gpio-0-15" > +#define OMAP_MPUIO_LABEL "mpuio" > > static struct gpiod_lookup_table ams_delta_nand_gpio_table = { > .table = { > @@ -349,6 +350,14 @@ static struct gpiod_lookup_table ams_delta_nand_gpio_table = { > GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_NAND_NWE, "nwe", 0), > GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_NAND_ALE, "ale", 0), > GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_NAND_CLE, "cle", 0), > + GPIO_LOOKUP_IDX(OMAP_MPUIO_LABEL, 0, "data", 0, 0), > + GPIO_LOOKUP_IDX(OMAP_MPUIO_LABEL, 1, "data", 1, 0), > + GPIO_LOOKUP_IDX(OMAP_MPUIO_LABEL, 2, "data", 2, 0), > + GPIO_LOOKUP_IDX(OMAP_MPUIO_LABEL, 3, "data", 3, 0), > + GPIO_LOOKUP_IDX(OMAP_MPUIO_LABEL, 4, "data", 4, 0), > + GPIO_LOOKUP_IDX(OMAP_MPUIO_LABEL, 5, "data", 5, 0), > + GPIO_LOOKUP_IDX(OMAP_MPUIO_LABEL, 6, "data", 6, 0), > + GPIO_LOOKUP_IDX(OMAP_MPUIO_LABEL, 7, "data", 7, 0), > { }, > }, > };