From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Craig Tatlor <ctatlor97@gmail.com>
Cc: linux-arm-msm@vger.kernel.org,
Linus Walleij <linus.walleij@linaro.org>,
linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] pinctrl: sdm660: Set tile property for pingroups
Date: Mon, 12 Nov 2018 18:50:12 -0800 [thread overview]
Message-ID: <20181113025012.GD10088@minitux> (raw)
In-Reply-To: <20181112202553.1410-1-ctatlor97@gmail.com>
On Mon 12 Nov 12:25 PST 2018, Craig Tatlor wrote:
> This was missed when tiles support was added in a revison and
> causes the driver to fail to load.
>
> Fixes: 9cf0c526bc58 ("pinctrl: qcom: Add sdm660 pinctrl driver")
> Signed-off-by: Craig Tatlor <ctatlor97@gmail.com>
> ---
Sorry for not spotting this in my previous review.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Regards,
Bjorn
> drivers/pinctrl/qcom/pinctrl-sdm660.c | 28 ++++++++++++++-------------
> 1 file changed, 15 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/pinctrl/qcom/pinctrl-sdm660.c b/drivers/pinctrl/qcom/pinctrl-sdm660.c
> index 6838b38555a1..1bfb0ae6b387 100644
> --- a/drivers/pinctrl/qcom/pinctrl-sdm660.c
> +++ b/drivers/pinctrl/qcom/pinctrl-sdm660.c
> @@ -33,7 +33,7 @@ enum {
> }
>
>
> -#define PINGROUP(id, base, f1, f2, f3, f4, f5, f6, f7, f8, f9) \
> +#define PINGROUP(id, _tile, f1, f2, f3, f4, f5, f6, f7, f8, f9) \
> { \
> .name = "gpio" #id, \
> .pins = gpio##id##_pins, \
> @@ -51,11 +51,12 @@ enum {
> msm_mux_##f9 \
> }, \
> .nfuncs = 10, \
> - .ctl_reg = base + REG_SIZE * id, \
> - .io_reg = base + 0x4 + REG_SIZE * id, \
> - .intr_cfg_reg = base + 0x8 + REG_SIZE * id, \
> - .intr_status_reg = base + 0xc + REG_SIZE * id, \
> - .intr_target_reg = base + 0x8 + REG_SIZE * id, \
> + .ctl_reg = REG_SIZE * id, \
> + .io_reg = 0x4 + REG_SIZE * id, \
> + .intr_cfg_reg = 0x8 + REG_SIZE * id, \
> + .intr_status_reg = 0xc + REG_SIZE * id, \
> + .intr_target_reg = 0x8 + REG_SIZE * id, \
> + .tile = _tile, \
> .mux_bit = 2, \
> .pull_bit = 0, \
> .drv_bit = 6, \
> @@ -82,6 +83,7 @@ enum {
> .intr_cfg_reg = 0, \
> .intr_status_reg = 0, \
> .intr_target_reg = 0, \
> + .tile = NORTH, \
> .mux_bit = -1, \
> .pull_bit = pull, \
> .drv_bit = drv, \
> @@ -1397,13 +1399,13 @@ static const struct msm_pingroup sdm660_groups[] = {
> PINGROUP(111, SOUTH, _, _, _, _, _, _, _, _, _),
> PINGROUP(112, SOUTH, _, _, _, _, _, _, _, _, _),
> PINGROUP(113, SOUTH, _, _, _, _, _, _, _, _, _),
> - SDC_QDSD_PINGROUP(sdc1_clk, 0x99a000, 13, 6),
> - SDC_QDSD_PINGROUP(sdc1_cmd, 0x99a000, 11, 3),
> - SDC_QDSD_PINGROUP(sdc1_data, 0x99a000, 9, 0),
> - SDC_QDSD_PINGROUP(sdc2_clk, 0x99b000, 14, 6),
> - SDC_QDSD_PINGROUP(sdc2_cmd, 0x99b000, 11, 3),
> - SDC_QDSD_PINGROUP(sdc2_data, 0x99b000, 9, 0),
> - SDC_QDSD_PINGROUP(sdc1_rclk, 0x99a000, 15, 0),
> + SDC_QDSD_PINGROUP(sdc1_clk, 0x9a000, 13, 6),
> + SDC_QDSD_PINGROUP(sdc1_cmd, 0x9a000, 11, 3),
> + SDC_QDSD_PINGROUP(sdc1_data, 0x9a000, 9, 0),
> + SDC_QDSD_PINGROUP(sdc2_clk, 0x9b000, 14, 6),
> + SDC_QDSD_PINGROUP(sdc2_cmd, 0x9b000, 11, 3),
> + SDC_QDSD_PINGROUP(sdc2_data, 0x9b000, 9, 0),
> + SDC_QDSD_PINGROUP(sdc1_rclk, 0x9a000, 15, 0),
> };
>
> static const struct msm_pinctrl_soc_data sdm660_pinctrl = {
> --
> 2.19.1
>
next prev parent reply other threads:[~2018-11-13 2:50 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-12 20:25 [PATCH] pinctrl: sdm660: Set tile property for pingroups Craig Tatlor
2018-11-13 2:50 ` Bjorn Andersson [this message]
2018-11-17 12:25 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181113025012.GD10088@minitux \
--to=bjorn.andersson@linaro.org \
--cc=ctatlor97@gmail.com \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).