From: "René van Dorst" <opensource-91nzXlUTePbQT0dZR+AlfA@public.gmane.org>
To: Linus Walleij
<linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
Bartosz Golaszewski
<bgolaszewski-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>,
Matthias Brugger
<matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: "René van Dorst"
<opensource-91nzXlUTePbQT0dZR+AlfA@public.gmane.org>,
gerg-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
stable-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-gpio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [PATCHv2] gpio: MT7621: use a per instance irq_chip structure
Date: Wed, 30 Jan 2019 17:10:49 +0100 [thread overview]
Message-ID: <20190130161048.9852-1-opensource@vdorst.com> (raw)
This fixes the kernel complains:
gpio gpiochip1: (1e000600.gpio-bank1): detected irqchip that is shared
with multiple gpiochips: please fix the driver.
gpio gpiochip2: (1e000600.gpio-bank2): detected irqchip that is shared
with multiple gpiochips: please fix the driver.
Fixes: 4ba9c3afda41 ("gpio: mt7621: Add a driver for MT7621")
Signed-off-by: René van Dorst <opensource@vdorst.com>
Cc: linux-gpio@vger.kernel.org
Cc: linux-mediatek@lists.infradead.org
Cc: gerg@kernel.org
Cc: stable@vger.kernel.org
---
drivers/gpio/gpio-mt7621.c | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
v2: Remove an empty line
Add Cc stable
diff --git a/drivers/gpio/gpio-mt7621.c b/drivers/gpio/gpio-mt7621.c
index 00e954f22bc9..74401e0adb29 100644
--- a/drivers/gpio/gpio-mt7621.c
+++ b/drivers/gpio/gpio-mt7621.c
@@ -30,6 +30,7 @@
#define GPIO_REG_EDGE 0xA0
struct mtk_gc {
+ struct irq_chip irq_chip;
struct gpio_chip chip;
spinlock_t lock;
int bank;
@@ -189,13 +190,6 @@ mediatek_gpio_irq_type(struct irq_data *d, unsigned int type)
return 0;
}
-static struct irq_chip mediatek_gpio_irq_chip = {
- .irq_unmask = mediatek_gpio_irq_unmask,
- .irq_mask = mediatek_gpio_irq_mask,
- .irq_mask_ack = mediatek_gpio_irq_mask,
- .irq_set_type = mediatek_gpio_irq_type,
-};
-
static int
mediatek_gpio_xlate(struct gpio_chip *chip,
const struct of_phandle_args *spec, u32 *flags)
@@ -254,6 +248,13 @@ mediatek_gpio_bank_probe(struct device *dev,
return ret;
}
+ rg->irq_chip.name = dev_name(dev);
+ rg->irq_chip.parent_device = dev;
+ rg->irq_chip.irq_unmask = mediatek_gpio_irq_unmask;
+ rg->irq_chip.irq_mask = mediatek_gpio_irq_mask;
+ rg->irq_chip.irq_mask_ack = mediatek_gpio_irq_mask;
+ rg->irq_chip.irq_set_type = mediatek_gpio_irq_type;
+
if (mtk->gpio_irq) {
/*
* Manually request the irq here instead of passing
@@ -270,14 +271,14 @@ mediatek_gpio_bank_probe(struct device *dev,
return ret;
}
- ret = gpiochip_irqchip_add(&rg->chip, &mediatek_gpio_irq_chip,
+ ret = gpiochip_irqchip_add(&rg->chip, &rg->irq_chip,
0, handle_simple_irq, IRQ_TYPE_NONE);
if (ret) {
dev_err(dev, "failed to add gpiochip_irqchip\n");
return ret;
}
- gpiochip_set_chained_irqchip(&rg->chip, &mediatek_gpio_irq_chip,
+ gpiochip_set_chained_irqchip(&rg->chip, &rg->irq_chip,
mtk->gpio_irq, NULL);
}
@@ -310,7 +311,6 @@ mediatek_gpio_probe(struct platform_device *pdev)
mtk->gpio_irq = irq_of_parse_and_map(np, 0);
mtk->dev = dev;
platform_set_drvdata(pdev, mtk);
- mediatek_gpio_irq_chip.name = dev_name(dev);
for (i = 0; i < MTK_BANK_CNT; i++) {
ret = mediatek_gpio_bank_probe(dev, np, i);
--
2.19.1
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
next reply other threads:[~2019-01-30 16:10 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-30 16:10 René van Dorst [this message]
[not found] ` <20190130161048.9852-1-opensource-91nzXlUTePbQT0dZR+AlfA@public.gmane.org>
2019-01-31 0:55 ` [PATCHv2] gpio: MT7621: use a per instance irq_chip structure Greg Ungerer
2019-02-08 11:30 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190130161048.9852-1-opensource@vdorst.com \
--to=opensource-91nzxlutepbqt0dzr+alfa@public.gmane.org \
--cc=bgolaszewski-rdvid1DuHRBWk0Htik3J/w@public.gmane.org \
--cc=gerg-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=linux-gpio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=stable-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).