From mboxrd@z Thu Jan 1 00:00:00 1970 From: Rob Herring Subject: Re: [PATCH v5 04/11] dt-bindings: input: add DT bindings for max77650 Date: Wed, 13 Feb 2019 14:50:23 -0600 Message-ID: <20190213205023.GA8340@bogus> References: <20190213134335.10838-1-brgl@bgdev.pl> <20190213134335.10838-5-brgl@bgdev.pl> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <20190213134335.10838-5-brgl@bgdev.pl> Sender: linux-kernel-owner@vger.kernel.org To: Bartosz Golaszewski Cc: Mark Rutland , Linus Walleij , Dmitry Torokhov , Jacek Anaszewski , Pavel Machek , Lee Jones , Sebastian Reichel , Liam Girdwood , Greg Kroah-Hartman , linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org, devicetree@vger.kernel.org, linux-input@vger.kernel.org, linux-leds@vger.kernel.org, linux-pm@vger.kernel.org, Bartosz Golaszewski List-Id: linux-gpio@vger.kernel.org On Wed, Feb 13, 2019 at 02:43:28PM +0100, Bartosz Golaszewski wrote: > From: Bartosz Golaszewski > > Add the DT binding document for the onkey module of max77650. > > Signed-off-by: Bartosz Golaszewski > --- > .../bindings/input/max77650-onkey.txt | 26 +++++++++++++++++++ > 1 file changed, 26 insertions(+) > create mode 100644 Documentation/devicetree/bindings/input/max77650-onkey.txt > > diff --git a/Documentation/devicetree/bindings/input/max77650-onkey.txt b/Documentation/devicetree/bindings/input/max77650-onkey.txt > new file mode 100644 > index 000000000000..37c80898be4d > --- /dev/null > +++ b/Documentation/devicetree/bindings/input/max77650-onkey.txt > @@ -0,0 +1,26 @@ > +Onkey driver for MAX77650 PMIC from Maxim Integrated. > + > +This module is part of the MAX77650 MFD device. For more details > +see Documentation/devicetree/bindings/mfd/max77650.txt. > + > +The onkey controller is represented as a sub-node of the PMIC node on > +the device tree. > + > +Required properties: > +-------------------- > +- compatible: Must be "maxim,max77650-onkey". > + > +Optional properties: > +- linux,code: The key-code to be reported when the key is pressed. > + Defaults to KEY_POWER. > +- maxim,onkey-mode: Must be "push" or "slide" depending on the type of > + button used by the system. Defaults to "push". Perhaps just a boolean for 'slide' mode. > + > +Example: > +-------- > + > + onkey { > + compatible = "maxim,max77650-onkey"; > + linux,code = ; > + maxim,onkey-mode = "slide"; > + }; > -- > 2.20.1 >