linux-gpio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: William Breathitt Gray <vilhelm.gray@gmail.com>
Cc: linus.walleij@linaro.org, akpm@linux-foundation.org,
	linux-gpio@vger.kernel.org, linux-arch@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux@rasmusvillemoes.dk,
	yamada.masahiro@socionext.com, bgolaszewski@baylibre.com,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v10 10/10] thermal: intel: intel_soc_dts_iosf: Utilize for_each_set_clump8 macro
Date: Fri, 22 Mar 2019 21:02:43 +0200	[thread overview]
Message-ID: <20190322190243.GA9224@smile.fi.intel.com> (raw)
In-Reply-To: <a240216a143782e3cfecf6f963578067b68b6007.1552566114.git.vilhelm.gray@gmail.com>

On Thu, Mar 14, 2019 at 09:32:57PM +0900, William Breathitt Gray wrote:
> Utilize for_each_set_clump8 macro, and the bitmap_set_value8 and
> bitmap_get_value8 functions, where appropriate. In addition, remove the
> now unnecessary temp_mask and temp_shift members of the
> intel_soc_dts_sensor_entry structure.

One comment below, otherwise
Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Thanks!

> 
> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
> ---
>  drivers/thermal/intel/intel_soc_dts_iosf.c | 29 +++++++++++++---------
>  drivers/thermal/intel/intel_soc_dts_iosf.h |  2 --
>  2 files changed, 17 insertions(+), 14 deletions(-)
> 
> diff --git a/drivers/thermal/intel/intel_soc_dts_iosf.c b/drivers/thermal/intel/intel_soc_dts_iosf.c
> index e0813dfaa278..b66f554670f7 100644
> --- a/drivers/thermal/intel/intel_soc_dts_iosf.c
> +++ b/drivers/thermal/intel/intel_soc_dts_iosf.c
> @@ -15,6 +15,7 @@
>  
>  #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
>  
> +#include <linux/bitops.h>
>  #include <linux/module.h>
>  #include <linux/slab.h>
>  #include <linux/interrupt.h>
> @@ -111,6 +112,7 @@ static int update_trip_temp(struct intel_soc_dts_sensor_entry *dts,
>  {
>  	int status;
>  	u32 temp_out;
> +	unsigned long update_ptps;
>  	u32 out;
>  	u32 store_ptps;
>  	u32 store_ptmc;
> @@ -129,8 +131,9 @@ static int update_trip_temp(struct intel_soc_dts_sensor_entry *dts,
>  	if (status)
>  		return status;
>  
> -	out = (store_ptps & ~(0xFF << (thres_index * 8)));
> -	out |= (temp_out & 0xFF) << (thres_index * 8);
> +	update_ptps = store_ptps;
> +	bitmap_set_value8(&update_ptps, 32, temp_out & 0xFF, thres_index * 8);
> +	out = update_ptps;
>  	status = iosf_mbi_write(BT_MBI_UNIT_PMC, MBI_REG_WRITE,
>  				SOC_DTS_OFFSET_PTPS, out);
>  	if (status)
> @@ -232,6 +235,7 @@ static int sys_get_curr_temp(struct thermal_zone_device *tzd,
>  	u32 out;
>  	struct intel_soc_dts_sensor_entry *dts;
>  	struct intel_soc_dts_sensors *sensors;
> +	unsigned long temp_raw;
>  
>  	dts = tzd->devdata;
>  	sensors = dts->sensors;
> @@ -240,7 +244,8 @@ static int sys_get_curr_temp(struct thermal_zone_device *tzd,
>  	if (status)
>  		return status;
>  
> -	out = (out & dts->temp_mask) >> dts->temp_shift;
> +	temp_raw = out;
> +	out = bitmap_get_value8(&temp_raw, 32, dts->id * 8);
>  	out -= SOC_DTS_TJMAX_ENCODING;
>  	*temp = sensors->tj_max - out * 1000;
>  
> @@ -290,10 +295,13 @@ static int add_dts_thermal_zone(int id, struct intel_soc_dts_sensor_entry *dts,
>  {
>  	char name[10];
>  	int trip_count = 0;
> +	int writable_trip_count = 0;
>  	int trip_mask = 0;
>  	u32 store_ptps;
>  	int ret;
> -	int i;
> +	unsigned int i;
> +	unsigned long trip;
> +	unsigned long ptps;
>  
>  	/* Store status to restor on exit */
>  	ret = iosf_mbi_read(BT_MBI_UNIT_PMC, MBI_REG_READ,
> @@ -302,11 +310,10 @@ static int add_dts_thermal_zone(int id, struct intel_soc_dts_sensor_entry *dts,
>  		goto err_ret;
>  
>  	dts->id = id;
> -	dts->temp_mask = 0x00FF << (id * 8);
> -	dts->temp_shift = id * 8;
>  	if (notification_support) {
>  		trip_count = min(SOC_MAX_DTS_TRIPS, trip_cnt);
> -		trip_mask = BIT(trip_count - read_only_trip_cnt) - 1;
> +		writable_trip_count = trip_count - read_only_trip_cnt;
> +		trip_mask = GENMASK(writable_trip_count - 1, 0);
>  	}
>  
>  	/* Check if the writable trip we provide is not used by BIOS */
> @@ -315,11 +322,9 @@ static int add_dts_thermal_zone(int id, struct intel_soc_dts_sensor_entry *dts,
>  	if (ret)
>  		trip_mask = 0;
>  	else {
> -		for (i = 0; i < trip_count; ++i) {
> -			if (trip_mask & BIT(i))
> -				if (store_ptps & (0xff << (i * 8)))
> -					trip_mask &= ~BIT(i);
> -		}
> +		ptps = store_ptps;
> +		for_each_set_clump8(i, trip, ptps, writable_trip_count * 8)

It seems you didn't notice gcc warnings, the ptps should be pointer, i.e. &ptps.
After changing here manually seems working.

> +			trip_mask &= ~BIT(i / 8);
>  	}
>  	dts->trip_mask = trip_mask;
>  	dts->trip_count = trip_count;
> diff --git a/drivers/thermal/intel/intel_soc_dts_iosf.h b/drivers/thermal/intel/intel_soc_dts_iosf.h
> index 625e37bf93dc..d0362d7acdef 100644
> --- a/drivers/thermal/intel/intel_soc_dts_iosf.h
> +++ b/drivers/thermal/intel/intel_soc_dts_iosf.h
> @@ -33,8 +33,6 @@ struct intel_soc_dts_sensors;
>  
>  struct intel_soc_dts_sensor_entry {
>  	int id;
> -	u32 temp_mask;
> -	u32 temp_shift;
>  	u32 store_status;
>  	u32 trip_mask;
>  	u32 trip_count;
> -- 
> 2.21.0
> 

-- 
With Best Regards,
Andy Shevchenko

  parent reply	other threads:[~2019-03-22 19:02 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-03-14 12:29 [PATCH v10 00/10] Introduce the for_each_set_clump8 macro William Breathitt Gray
2019-03-14 12:30 ` [PATCH v10 01/10] bitops: " William Breathitt Gray
2019-03-22 18:22   ` Andy Shevchenko
2019-03-14 12:30 ` [PATCH v10 02/10] lib/test_bitmap.c: Add for_each_set_clump8 test cases William Breathitt Gray
2019-03-14 12:30 ` [PATCH v10 03/10] gpio: 104-dio-48e: Utilize for_each_set_clump8 macro William Breathitt Gray
2019-03-14 12:30 ` [PATCH v10 04/10] gpio: 104-idi-48: " William Breathitt Gray
2019-03-14 12:31 ` [PATCH v10 05/10] gpio: gpio-mm: " William Breathitt Gray
2019-03-14 12:31 ` [PATCH v10 06/10] gpio: ws16c48: " William Breathitt Gray
2019-03-14 12:31 ` [PATCH v10 07/10] gpio: pci-idio-16: " William Breathitt Gray
2019-03-14 12:32 ` [PATCH v10 08/10] gpio: pcie-idio-24: " William Breathitt Gray
2019-03-14 12:32 ` [PATCH v10 09/10] gpio: uniphier: " William Breathitt Gray
2019-03-14 12:53   ` William Breathitt Gray
2019-03-14 12:32 ` [PATCH v10 10/10] thermal: intel: intel_soc_dts_iosf: " William Breathitt Gray
2019-03-14 14:26   ` Andy Shevchenko
2019-03-14 14:39     ` William Breathitt Gray
2019-03-22 19:02   ` Andy Shevchenko [this message]
2019-03-24  3:38     ` William Breathitt Gray
2019-03-24 13:52       ` Andy Shevchenko
2019-03-22 19:12 ` [PATCH v10 00/10] Introduce the " Andy Shevchenko
2019-03-24  4:08   ` William Breathitt Gray
2019-03-24  8:53     ` Geert Uytterhoeven
2019-03-24 12:08     ` Andy Shevchenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190322190243.GA9224@smile.fi.intel.com \
    --to=andriy.shevchenko@linux.intel.com \
    --cc=akpm@linux-foundation.org \
    --cc=bgolaszewski@baylibre.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arch@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@rasmusvillemoes.dk \
    --cc=vilhelm.gray@gmail.com \
    --cc=yamada.masahiro@socionext.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).