From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Kai-Heng Feng <kai.heng.feng@canonical.com>,
Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
Sasha Levin <sashal@kernel.org>,
linux-gpio@vger.kernel.org
Subject: [PATCH AUTOSEL 5.1 08/70] pinctrl: intel: Clear interrupt status in mask/unmask callback
Date: Sat, 8 Jun 2019 07:38:47 -0400 [thread overview]
Message-ID: <20190608113950.8033-8-sashal@kernel.org> (raw)
In-Reply-To: <20190608113950.8033-1-sashal@kernel.org>
From: Kai-Heng Feng <kai.heng.feng@canonical.com>
[ Upstream commit 670784fb4ebe54434e263837390e358405031d9e ]
Commit a939bb57cd47 ("pinctrl: intel: implement gpio_irq_enable") was
added because clearing interrupt status bit is required to avoid
unexpected behavior.
Turns out the unmask callback also needs the fix, which can solve weird
IRQ triggering issues on I2C touchpad ELAN1200.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/pinctrl/intel/pinctrl-intel.c | 37 +++++----------------------
1 file changed, 6 insertions(+), 31 deletions(-)
diff --git a/drivers/pinctrl/intel/pinctrl-intel.c b/drivers/pinctrl/intel/pinctrl-intel.c
index 3b1818184207..717148d2818c 100644
--- a/drivers/pinctrl/intel/pinctrl-intel.c
+++ b/drivers/pinctrl/intel/pinctrl-intel.c
@@ -913,35 +913,6 @@ static void intel_gpio_irq_ack(struct irq_data *d)
}
}
-static void intel_gpio_irq_enable(struct irq_data *d)
-{
- struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
- struct intel_pinctrl *pctrl = gpiochip_get_data(gc);
- const struct intel_community *community;
- const struct intel_padgroup *padgrp;
- int pin;
-
- pin = intel_gpio_to_pin(pctrl, irqd_to_hwirq(d), &community, &padgrp);
- if (pin >= 0) {
- unsigned int gpp, gpp_offset, is_offset;
- unsigned long flags;
- u32 value;
-
- gpp = padgrp->reg_num;
- gpp_offset = padgroup_offset(padgrp, pin);
- is_offset = community->is_offset + gpp * 4;
-
- raw_spin_lock_irqsave(&pctrl->lock, flags);
- /* Clear interrupt status first to avoid unexpected interrupt */
- writel(BIT(gpp_offset), community->regs + is_offset);
-
- value = readl(community->regs + community->ie_offset + gpp * 4);
- value |= BIT(gpp_offset);
- writel(value, community->regs + community->ie_offset + gpp * 4);
- raw_spin_unlock_irqrestore(&pctrl->lock, flags);
- }
-}
-
static void intel_gpio_irq_mask_unmask(struct irq_data *d, bool mask)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
@@ -954,15 +925,20 @@ static void intel_gpio_irq_mask_unmask(struct irq_data *d, bool mask)
if (pin >= 0) {
unsigned int gpp, gpp_offset;
unsigned long flags;
- void __iomem *reg;
+ void __iomem *reg, *is;
u32 value;
gpp = padgrp->reg_num;
gpp_offset = padgroup_offset(padgrp, pin);
reg = community->regs + community->ie_offset + gpp * 4;
+ is = community->regs + community->is_offset + gpp * 4;
raw_spin_lock_irqsave(&pctrl->lock, flags);
+
+ /* Clear interrupt status first to avoid unexpected interrupt */
+ writel(BIT(gpp_offset), is);
+
value = readl(reg);
if (mask)
value &= ~BIT(gpp_offset);
@@ -1106,7 +1082,6 @@ static irqreturn_t intel_gpio_irq(int irq, void *data)
static struct irq_chip intel_gpio_irqchip = {
.name = "intel-gpio",
- .irq_enable = intel_gpio_irq_enable,
.irq_ack = intel_gpio_irq_ack,
.irq_mask = intel_gpio_irq_mask,
.irq_unmask = intel_gpio_irq_unmask,
--
2.20.1
next parent reply other threads:[~2019-06-08 11:38 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20190608113950.8033-1-sashal@kernel.org>
2019-06-08 11:38 ` Sasha Levin [this message]
2019-06-08 11:39 ` [PATCH AUTOSEL 5.1 24/70] gpio: fix gpio-adp5588 build errors Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190608113950.8033-8-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=andriy.shevchenko@linux.intel.com \
--cc=kai.heng.feng@canonical.com \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).