linux-gpio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Icenowy Zheng <icenowy@aosc.io>
To: Rob Herring <robh+dt@kernel.org>,
	Maxime Ripard <maxime.ripard@bootlin.com>,
	Chen-Yu Tsai <wens@csie.org>,
	Linus Walleij <linus.walleij@linaro.org>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org,
	linux-gpio@vger.kernel.org, linux-sunxi@googlegroups.com,
	Icenowy Zheng <icenowy@aosc.io>
Subject: [PATCH v3 9/9] ARM: dts: sun8i: s3: add devicetree for Lichee zero plus w/ S3
Date: Sun, 23 Jun 2019 12:38:01 +0800	[thread overview]
Message-ID: <20190623043801.14040-10-icenowy@aosc.io> (raw)
In-Reply-To: <20190623043801.14040-1-icenowy@aosc.io>

Lichee zero plus is a core board made by Sipeed, which includes on-board
TF slot or SMT SD NAND, and optional SPI NOR or eMMC, a UART debug
header, a microUSB slot and a gold finger connector for expansion. It
can use either Sochip S3 or Allwinner S3L SoC.

Add the basic device tree for the core board, w/o optional onboard
storage, and with S3 SoC.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
---
Changes in v3:
- Drop common regulator DTSI usage and added vcc3v3 regulator.

 arch/arm/boot/dts/Makefile                    |  1 +
 .../boot/dts/sun8i-s3-lichee-zero-plus.dts    |  8 ++++
 .../dts/sun8i-s3-s3l-lichee-zero-plus.dtsi    | 44 +++++++++++++++++++
 3 files changed, 53 insertions(+)
 create mode 100644 arch/arm/boot/dts/sun8i-s3-lichee-zero-plus.dts
 create mode 100644 arch/arm/boot/dts/sun8i-s3-s3l-lichee-zero-plus.dtsi

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index c4742afe41a7..d24dec29245e 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1113,6 +1113,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \
 	sun8i-r16-nintendo-super-nes-classic.dtb \
 	sun8i-r16-parrot.dtb \
 	sun8i-r40-bananapi-m2-ultra.dtb \
+	sun8i-s3-lichee-zero-plus.dtb \
 	sun8i-t3-cqa3t-bv3.dtb \
 	sun8i-v3s-licheepi-zero.dtb \
 	sun8i-v3s-licheepi-zero-dock.dtb \
diff --git a/arch/arm/boot/dts/sun8i-s3-lichee-zero-plus.dts b/arch/arm/boot/dts/sun8i-s3-lichee-zero-plus.dts
new file mode 100644
index 000000000000..7d2f6b145190
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-s3-lichee-zero-plus.dts
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Icenowy Zheng <icenowy@aosc.io>
+ */
+
+/dts-v1/;
+#include "sun8i-s3.dtsi"
+#include "sun8i-s3-s3l-lichee-zero-plus.dtsi"
diff --git a/arch/arm/boot/dts/sun8i-s3-s3l-lichee-zero-plus.dtsi b/arch/arm/boot/dts/sun8i-s3-s3l-lichee-zero-plus.dtsi
new file mode 100644
index 000000000000..e68f738c3046
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-s3-s3l-lichee-zero-plus.dtsi
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Icenowy Zheng <icenowy@aosc.io>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_vcc3v3: vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&mmc0 {
+	broken-cd;
+	bus-width = <4>;
+	vmmc-supply = <&reg_vcc3v3>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-0 = <&uart0_pb_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
-- 
2.21.0


  parent reply	other threads:[~2019-06-23  4:40 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-23  4:37 [PATCH v3 0/9] Support for Allwinner V3/S3L and Sochip S3 Icenowy Zheng
2019-06-23  4:37 ` [PATCH v3 1/9] pinctrl: sunxi: v3s: introduce support for V3 Icenowy Zheng
2019-06-24 12:40   ` Maxime Ripard
2019-06-25 13:57     ` Linus Walleij
2019-06-25 14:10       ` Maxime Ripard
2019-06-23  4:37 ` [PATCH v3 2/9] clk: sunxi-ng: v3s: add the missing PLL_DDR1 Icenowy Zheng
2019-06-23  4:37 ` [PATCH v3 3/9] dt-bindings: clk: sunxi-ccu: add compatible string for V3 CCU Icenowy Zheng
2019-06-23  4:37 ` [PATCH v3 4/9] clk: sunxi-ng: v3s: add Allwinner V3 support Icenowy Zheng
2019-07-09 22:56   ` Rob Herring
2019-06-23  4:37 ` [PATCH v3 5/9] dt-bindings: vendor-prefixes: add SoChip Icenowy Zheng
2019-06-25 13:55   ` Linus Walleij
2019-06-25 17:39     ` Rob Herring
2019-06-23  4:37 ` [PATCH v3 6/9] ARM: sunxi: dts: s3/s3l/v3: add DTSI files for S3/S3L/V3 SoCs Icenowy Zheng
2019-06-23  4:37 ` [PATCH v3 7/9] dt-bindings: vendor-prefixes: add Sipeed Icenowy Zheng
2019-07-09 22:57   ` Rob Herring
2019-06-23  4:38 ` [PATCH v3 8/9] dt-bindings: arm: sunxi: add binding for Lichee Zero Plus core board Icenowy Zheng
2019-06-24 12:42   ` Maxime Ripard
2019-06-23  4:38 ` Icenowy Zheng [this message]
2019-06-24 12:43   ` [PATCH v3 9/9] ARM: dts: sun8i: s3: add devicetree for Lichee zero plus w/ S3 Maxime Ripard
2019-06-24 13:43     ` Icenowy Zheng
2019-06-24 13:48       ` Maxime Ripard

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190623043801.14040-10-icenowy@aosc.io \
    --to=icenowy@aosc.io \
    --cc=devicetree@vger.kernel.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sunxi@googlegroups.com \
    --cc=maxime.ripard@bootlin.com \
    --cc=robh+dt@kernel.org \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).