[PATCH 3/5] gpio: siox: Pass irqchip when adding gpiochip

[Linus Walleij <linus.walleij@linaro.org>]

We need to convert all old gpio irqchips to pass the irqchip
setup along when adding the gpio_chip.

For chained irqchips this is a pretty straight-forward
conversion.

Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Thierry Reding <treding@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
ChangeLog v1->v2:
- Split out bugfixes to separate patches.
---
 drivers/gpio/gpio-siox.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/gpio/gpio-siox.c b/drivers/gpio/gpio-siox.c
index 40067e1535d3..31749c058e33 100644
--- a/drivers/gpio/gpio-siox.c
+++ b/drivers/gpio/gpio-siox.c
@@ -211,6 +211,7 @@ static int gpio_siox_get_direction(struct gpio_chip *chip, unsigned int offset)
 static int gpio_siox_probe(struct siox_device *sdevice)
 {
 	struct gpio_siox_ddata *ddata;
+	struct gpio_irq_chip *girq;
 	int ret;
 
 	ddata = devm_kzalloc(&sdevice->dev, sizeof(*ddata), GFP_KERNEL);
@@ -239,6 +240,11 @@ static int gpio_siox_probe(struct siox_device *sdevice)
 	ddata->ichip.irq_unmask = gpio_siox_irq_unmask;
 	ddata->ichip.irq_set_type = gpio_siox_irq_set_type;
 
+	girq = &ddata->gchip.irq;
+	girq->chip = &ddata->ichip;
+	girq->default_type = IRQ_TYPE_NONE;
+	girq->handler = handle_level_irq;
+
 	ret = gpiochip_add(&ddata->gchip);
 	if (ret) {
 		dev_err(&sdevice->dev,
@@ -246,13 +252,7 @@ static int gpio_siox_probe(struct siox_device *sdevice)
 		return ret;
 	}
 
-	ret = gpiochip_irqchip_add(&ddata->gchip, &ddata->ichip,
-				   0, handle_level_irq, IRQ_TYPE_NONE);
-	if (ret)
-		dev_err(&sdevice->dev,
-			"Failed to register irq chip (%d)\n", ret);
-
-	return ret;
+	return 0;
 }
 
 static int gpio_siox_remove(struct siox_device *sdevice)
-- 
2.20.1