From: Michael Wu <michael.wu@vatics.com>
To: Linus Walleij <linus.walleij@linaro.org>,
Bartosz Golaszewski <bgolaszewski@baylibre.com>,
<linux-gpio@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Cc: <morgan.chang@vatics.com>, <stable@vger.kernel.org>
Subject: [PATCH v2] gpiolib: fix incorrect IRQ requesting of an active-low lineevent
Date: Mon, 8 Jul 2019 13:23:08 +0800 [thread overview]
Message-ID: <20190708052308.27802-1-michael.wu@vatics.com> (raw)
When a pin is active-low, logical trigger edge should be inverted to match
the same interrupt opportunity.
For example, a button pushed triggers falling edge in ACTIVE_HIGH case; in
ACTIVE_LOW case, the button pushed triggers rising edge. For user space the
IRQ requesting doesn't need to do any modification except to configuring
GPIOHANDLE_REQUEST_ACTIVE_LOW.
For example, we want to catch the event when the button is pushed. The
button on the original board drives level to be low when it is pushed, and
drives level to be high when it is released.
In user space we can do:
req.handleflags = GPIOHANDLE_REQUEST_INPUT;
req.eventflags = GPIOEVENT_REQUEST_FALLING_EDGE;
while (1) {
read(fd, &dat, sizeof(dat));
if (dat.id == GPIOEVENT_EVENT_FALLING_EDGE)
printf("button pushed\n");
}
Run the same logic on another board which the polarity of the button is
inverted; it drives level to be high when pushed, and level to be low when
released. For this inversion we add flag GPIOHANDLE_REQUEST_ACTIVE_LOW:
req.handleflags = GPIOHANDLE_REQUEST_INPUT |
GPIOHANDLE_REQUEST_ACTIVE_LOW;
req.eventflags = GPIOEVENT_REQUEST_FALLING_EDGE;
At the result, there are no any events caught when the button is pushed.
By the way, button releasing will emit a "falling" event. The timing of
"falling" catching is not expected.
Cc: stable@vger.kernel.org
Signed-off-by: Michael Wu <michael.wu@vatics.com>
---
Changes from v1:
- Correct undeclared 'IRQ_TRIGGER_RISING'
- Add an example to descibe the issue
---
drivers/gpio/gpiolib.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index e013d417a936..9c9597f929d7 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -956,9 +956,11 @@ static int lineevent_create(struct gpio_device *gdev, void __user *ip)
}
if (eflags & GPIOEVENT_REQUEST_RISING_EDGE)
- irqflags |= IRQF_TRIGGER_RISING;
+ irqflags |= test_bit(FLAG_ACTIVE_LOW, &desc->flags) ?
+ IRQF_TRIGGER_FALLING : IRQF_TRIGGER_RISING;
if (eflags & GPIOEVENT_REQUEST_FALLING_EDGE)
- irqflags |= IRQF_TRIGGER_FALLING;
+ irqflags |= test_bit(FLAG_ACTIVE_LOW, &desc->flags) ?
+ IRQF_TRIGGER_RISING : IRQF_TRIGGER_FALLING;
irqflags |= IRQF_ONESHOT;
INIT_KFIFO(le->events);
--
2.17.1
next reply other threads:[~2019-07-08 5:23 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-08 5:23 Michael Wu [this message]
2019-07-08 8:54 ` [PATCH v2] gpiolib: fix incorrect IRQ requesting of an active-low lineevent Bartosz Golaszewski
2019-07-22 13:53 ` Bartosz Golaszewski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190708052308.27802-1-michael.wu@vatics.com \
--to=michael.wu@vatics.com \
--cc=bgolaszewski@baylibre.com \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=morgan.chang@vatics.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).