* [PATCH] pinctrl: rzn1: Add of_node_put() before return
@ 2019-08-04 15:40 Nishka Dasgupta
2019-08-05 7:18 ` Geert Uytterhoeven
0 siblings, 1 reply; 2+ messages in thread
From: Nishka Dasgupta @ 2019-08-04 15:40 UTC (permalink / raw)
To: geert+renesas, linus.walleij, linux-renesas-soc, linux-gpio,
linux-kernel
Cc: Nishka Dasgupta
Each iteration of for_each_child_of_node puts the previous node, but in
the case of a return from the middle of the loop, there is no put, thus
causing a memory leak. Hence add an of_node_put before the return in
three places.
Issue found with Coccinelle.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
---
drivers/pinctrl/pinctrl-rzn1.c | 12 +++++++++---
1 file changed, 9 insertions(+), 3 deletions(-)
diff --git a/drivers/pinctrl/pinctrl-rzn1.c b/drivers/pinctrl/pinctrl-rzn1.c
index cc0e5aa9128a..0f6f8a10a53a 100644
--- a/drivers/pinctrl/pinctrl-rzn1.c
+++ b/drivers/pinctrl/pinctrl-rzn1.c
@@ -412,8 +412,10 @@ static int rzn1_dt_node_to_map(struct pinctrl_dev *pctldev,
for_each_child_of_node(np, child) {
ret = rzn1_dt_node_to_map_one(pctldev, child, map, num_maps);
- if (ret < 0)
+ if (ret < 0) {
+ of_node_put(child);
return ret;
+ }
}
return 0;
@@ -792,8 +794,10 @@ static int rzn1_pinctrl_parse_functions(struct device_node *np,
grp = &ipctl->groups[ipctl->ngroups];
grp->func = func->name;
ret = rzn1_pinctrl_parse_groups(child, grp, ipctl);
- if (ret < 0)
+ if (ret < 0) {
+ of_node_put(child);
return ret;
+ }
i++;
ipctl->ngroups++;
}
@@ -838,8 +842,10 @@ static int rzn1_pinctrl_probe_dt(struct platform_device *pdev,
for_each_child_of_node(np, child) {
ret = rzn1_pinctrl_parse_functions(child, ipctl, i++);
- if (ret < 0)
+ if (ret < 0) {
+ of_node_put(child);
return ret;
+ }
}
return 0;
--
2.19.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH] pinctrl: rzn1: Add of_node_put() before return
2019-08-04 15:40 [PATCH] pinctrl: rzn1: Add of_node_put() before return Nishka Dasgupta
@ 2019-08-05 7:18 ` Geert Uytterhoeven
0 siblings, 0 replies; 2+ messages in thread
From: Geert Uytterhoeven @ 2019-08-05 7:18 UTC (permalink / raw)
To: Nishka Dasgupta
Cc: Geert Uytterhoeven, Linus Walleij, Linux-Renesas,
open list:GPIO SUBSYSTEM, Linux Kernel Mailing List,
Phil Edworthy
CC Phil
On Sun, Aug 4, 2019 at 5:40 PM Nishka Dasgupta <nishkadg.linux@gmail.com> wrote:
> Each iteration of for_each_child_of_node puts the previous node, but in
> the case of a return from the middle of the loop, there is no put, thus
> causing a memory leak. Hence add an of_node_put before the return in
> three places.
> Issue found with Coccinelle.
>
> Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
i.e. will queue in sh-pfc-for-v5.4.
> ---
> drivers/pinctrl/pinctrl-rzn1.c | 12 +++++++++---
> 1 file changed, 9 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/pinctrl/pinctrl-rzn1.c b/drivers/pinctrl/pinctrl-rzn1.c
> index cc0e5aa9128a..0f6f8a10a53a 100644
> --- a/drivers/pinctrl/pinctrl-rzn1.c
> +++ b/drivers/pinctrl/pinctrl-rzn1.c
> @@ -412,8 +412,10 @@ static int rzn1_dt_node_to_map(struct pinctrl_dev *pctldev,
>
> for_each_child_of_node(np, child) {
> ret = rzn1_dt_node_to_map_one(pctldev, child, map, num_maps);
> - if (ret < 0)
> + if (ret < 0) {
> + of_node_put(child);
> return ret;
> + }
> }
>
> return 0;
> @@ -792,8 +794,10 @@ static int rzn1_pinctrl_parse_functions(struct device_node *np,
> grp = &ipctl->groups[ipctl->ngroups];
> grp->func = func->name;
> ret = rzn1_pinctrl_parse_groups(child, grp, ipctl);
> - if (ret < 0)
> + if (ret < 0) {
> + of_node_put(child);
> return ret;
> + }
> i++;
> ipctl->ngroups++;
> }
> @@ -838,8 +842,10 @@ static int rzn1_pinctrl_probe_dt(struct platform_device *pdev,
>
> for_each_child_of_node(np, child) {
> ret = rzn1_pinctrl_parse_functions(child, ipctl, i++);
> - if (ret < 0)
> + if (ret < 0) {
> + of_node_put(child);
> return ret;
> + }
> }
>
> return 0;
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2019-08-05 7:18 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2019-08-04 15:40 [PATCH] pinctrl: rzn1: Add of_node_put() before return Nishka Dasgupta
2019-08-05 7:18 ` Geert Uytterhoeven
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).