From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Alexandre Torgue <alexandre.torgue@st.com>,
Amelie Delaunay <amelie.delaunay@st.com>,
Linus Walleij <linus.walleij@linaro.org>,
Sasha Levin <sashal@kernel.org>,
linux-gpio@vger.kernel.org
Subject: [PATCH AUTOSEL 5.2 18/70] pinctrl: stmfx: update pinconf settings
Date: Tue, 24 Sep 2019 12:44:57 -0400 [thread overview]
Message-ID: <20190924164549.27058-18-sashal@kernel.org> (raw)
In-Reply-To: <20190924164549.27058-1-sashal@kernel.org>
From: Alexandre Torgue <alexandre.torgue@st.com>
[ Upstream commit a502b343ebd0eab38f3cb33fbb84011847cf5aac ]
According to the following tab (coming from STMFX datasheet), updates
have to done in stmfx_pinconf_set function:
-"type" has to be set when "bias" is configured as "pull-up or pull-down"
-PIN_CONFIG_DRIVE_PUSH_PULL should only be used when gpio is configured as
output. There is so no need to check direction.
DIR | TYPE | PUPD | MFX GPIO configuration
----|------|------|---------------------------------------------------
1 | 1 | 1 | OUTPUT open drain with internal pull-up resistor
----|------|------|---------------------------------------------------
1 | 1 | 0 | OUTPUT open drain with internal pull-down resistor
----|------|------|---------------------------------------------------
1 | 0 | 0/1 | OUTPUT push pull no pull
----|------|------|---------------------------------------------------
0 | 1 | 1 | INPUT with internal pull-up resistor
----|------|------|---------------------------------------------------
0 | 1 | 0 | INPUT with internal pull-down resistor
----|------|------|---------------------------------------------------
0 | 0 | 1 | INPUT floating
----|------|------|---------------------------------------------------
0 | 0 | 0 | analog (GPIO not used, default setting)
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Link: https://lore.kernel.org/r/1564053416-32192-1-git-send-email-amelie.delaunay@st.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/pinctrl/pinctrl-stmfx.c | 24 ++++++++++++------------
1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/drivers/pinctrl/pinctrl-stmfx.c b/drivers/pinctrl/pinctrl-stmfx.c
index eba872ce4a7cb..c82ad4b629e3e 100644
--- a/drivers/pinctrl/pinctrl-stmfx.c
+++ b/drivers/pinctrl/pinctrl-stmfx.c
@@ -296,29 +296,29 @@ static int stmfx_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
switch (param) {
case PIN_CONFIG_BIAS_PULL_PIN_DEFAULT:
case PIN_CONFIG_BIAS_DISABLE:
+ case PIN_CONFIG_DRIVE_PUSH_PULL:
+ ret = stmfx_pinconf_set_type(pctl, pin, 0);
+ if (ret)
+ return ret;
+ break;
case PIN_CONFIG_BIAS_PULL_DOWN:
+ ret = stmfx_pinconf_set_type(pctl, pin, 1);
+ if (ret)
+ return ret;
ret = stmfx_pinconf_set_pupd(pctl, pin, 0);
if (ret)
return ret;
break;
case PIN_CONFIG_BIAS_PULL_UP:
- ret = stmfx_pinconf_set_pupd(pctl, pin, 1);
+ ret = stmfx_pinconf_set_type(pctl, pin, 1);
if (ret)
return ret;
- break;
- case PIN_CONFIG_DRIVE_OPEN_DRAIN:
- if (!dir)
- ret = stmfx_pinconf_set_type(pctl, pin, 1);
- else
- ret = stmfx_pinconf_set_type(pctl, pin, 0);
+ ret = stmfx_pinconf_set_pupd(pctl, pin, 1);
if (ret)
return ret;
break;
- case PIN_CONFIG_DRIVE_PUSH_PULL:
- if (!dir)
- ret = stmfx_pinconf_set_type(pctl, pin, 0);
- else
- ret = stmfx_pinconf_set_type(pctl, pin, 1);
+ case PIN_CONFIG_DRIVE_OPEN_DRAIN:
+ ret = stmfx_pinconf_set_type(pctl, pin, 1);
if (ret)
return ret;
break;
--
2.20.1
next parent reply other threads:[~2019-09-24 16:59 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20190924164549.27058-1-sashal@kernel.org>
2019-09-24 16:44 ` Sasha Levin [this message]
2019-09-24 16:45 ` [PATCH AUTOSEL 5.2 39/70] pinctrl: tegra: Fix write barrier placement in pmx_writel Sasha Levin
2019-09-24 16:45 ` [PATCH AUTOSEL 5.2 44/70] pinctrl: amd: disable spurious-firing GPIO IRQs Sasha Levin
2019-09-24 16:45 ` [PATCH AUTOSEL 5.2 56/70] pinctrl: meson-gxbb: Fix wrong pinning definition for uart_c Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190924164549.27058-18-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=alexandre.torgue@st.com \
--cc=amelie.delaunay@st.com \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).