linux-gpio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Mika Westerberg <mika.westerberg@linux.intel.com>,
	linux-gpio@vger.kernel.org,
	Linus Walleij <linus.walleij@linaro.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Subject: [PATCH v1] pinctrl: cherryview: Allocate IRQ chip dynamic
Date: Thu, 24 Oct 2019 16:34:41 +0300	[thread overview]
Message-ID: <20191024133441.76222-1-andriy.shevchenko@linux.intel.com> (raw)

Keeping the IRQ chip definition static shares it with multiple instances
of the GPIO chip in the system. This is bad and now we get this warning
from GPIO library:

"detected irqchip that is shared with multiple gpiochips: please fix the driver."

Hence, move the IRQ chip definition from being driver static into the struct
intel_pinctrl. So a unique IRQ chip is used for each GPIO chip instance.

This patch is heavily based on the attachment to the bug by Christoph Marz.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=202543
Fixes: 6e08d6bbebeb ("pinctrl: Add Intel Cherryview/Braswell pin controller support")
Depends-on: 83b9dc11312f ("pinctrl: cherryview: Associate IRQ descriptors to irqdomain")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/pinctrl/intel/pinctrl-cherryview.c | 24 +++++++++++-----------
 1 file changed, 12 insertions(+), 12 deletions(-)

diff --git a/drivers/pinctrl/intel/pinctrl-cherryview.c b/drivers/pinctrl/intel/pinctrl-cherryview.c
index 5af6b20f7334..dff2a81250b6 100644
--- a/drivers/pinctrl/intel/pinctrl-cherryview.c
+++ b/drivers/pinctrl/intel/pinctrl-cherryview.c
@@ -147,6 +147,7 @@ struct chv_pin_context {
  * @pctldesc: Pin controller description
  * @pctldev: Pointer to the pin controller device
  * @chip: GPIO chip in this pin controller
+ * @irqchip: IRQ chip in this pin controller
  * @regs: MMIO registers
  * @intr_lines: Stores mapping between 16 HW interrupt wires and GPIO
  *		offset (in GPIO number space)
@@ -162,6 +163,7 @@ struct chv_pinctrl {
 	struct pinctrl_desc pctldesc;
 	struct pinctrl_dev *pctldev;
 	struct gpio_chip chip;
+	struct irq_chip irqchip;
 	void __iomem *regs;
 	unsigned intr_lines[16];
 	const struct chv_community *community;
@@ -1466,16 +1468,6 @@ static int chv_gpio_irq_type(struct irq_data *d, unsigned int type)
 	return 0;
 }
 
-static struct irq_chip chv_gpio_irqchip = {
-	.name = "chv-gpio",
-	.irq_startup = chv_gpio_irq_startup,
-	.irq_ack = chv_gpio_irq_ack,
-	.irq_mask = chv_gpio_irq_mask,
-	.irq_unmask = chv_gpio_irq_unmask,
-	.irq_set_type = chv_gpio_irq_type,
-	.flags = IRQCHIP_SKIP_SET_WAKE,
-};
-
 static void chv_gpio_irq_handler(struct irq_desc *desc)
 {
 	struct gpio_chip *gc = irq_desc_get_handler_data(desc);
@@ -1625,7 +1617,15 @@ static int chv_gpio_probe(struct chv_pinctrl *pctrl, int irq)
 		}
 	}
 
-	ret = gpiochip_irqchip_add(chip, &chv_gpio_irqchip, 0,
+	pctrl->irqchip.name = "chv-gpio";
+	pctrl->irqchip.irq_startup = chv_gpio_irq_startup;
+	pctrl->irqchip.irq_ack = chv_gpio_irq_ack;
+	pctrl->irqchip.irq_mask = chv_gpio_irq_mask;
+	pctrl->irqchip.irq_unmask = chv_gpio_irq_unmask;
+	pctrl->irqchip.irq_set_type = chv_gpio_irq_type;
+	pctrl->irqchip.flags = IRQCHIP_SKIP_SET_WAKE;
+
+	ret = gpiochip_irqchip_add(chip, &pctrl->irqchip, 0,
 				   handle_bad_irq, IRQ_TYPE_NONE);
 	if (ret) {
 		dev_err(pctrl->dev, "failed to add IRQ chip\n");
@@ -1642,7 +1642,7 @@ static int chv_gpio_probe(struct chv_pinctrl *pctrl, int irq)
 		}
 	}
 
-	gpiochip_set_chained_irqchip(chip, &chv_gpio_irqchip, irq,
+	gpiochip_set_chained_irqchip(chip, &pctrl->irqchip, irq,
 				     chv_gpio_irq_handler);
 	return 0;
 }
-- 
2.23.0


             reply	other threads:[~2019-10-24 13:34 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-24 13:34 Andy Shevchenko [this message]
2019-10-25 10:00 ` [PATCH v1] pinctrl: cherryview: Allocate IRQ chip dynamic Mika Westerberg

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191024133441.76222-1-andriy.shevchenko@linux.intel.com \
    --to=andriy.shevchenko@linux.intel.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=mika.westerberg@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).