From: Kent Gibson <warthog618@gmail.com>
To: linux-gpio@vger.kernel.org, bgolaszewski@baylibre.com,
linus.walleij@linaro.org, bamv2005@gmail.com
Cc: drew@pdp7.com, Kent Gibson <warthog618@gmail.com>
Subject: [PATCH v4 3/5] gpio: mockup: add set_config to support pull up/down
Date: Mon, 28 Oct 2019 15:37:11 +0800 [thread overview]
Message-ID: <20191028073713.25664-4-warthog618@gmail.com> (raw)
In-Reply-To: <20191028073713.25664-1-warthog618@gmail.com>
Add support for the pull up/down state set via gpiolib line requests to
be reflected in the state of the mockup.
Use case is for testing of the GPIO uAPI, specifically the pull up/down
flags.
Signed-off-by: Kent Gibson <warthog618@gmail.com>
---
drivers/gpio/gpio-mockup.c | 94 ++++++++++++++++++++++++--------------
1 file changed, 60 insertions(+), 34 deletions(-)
diff --git a/drivers/gpio/gpio-mockup.c b/drivers/gpio/gpio-mockup.c
index 213aedc97dc2..c28219962ae2 100644
--- a/drivers/gpio/gpio-mockup.c
+++ b/drivers/gpio/gpio-mockup.c
@@ -146,6 +146,61 @@ static void gpio_mockup_set_multiple(struct gpio_chip *gc,
mutex_unlock(&chip->lock);
}
+static int gpio_mockup_apply_pull(struct gpio_mockup_chip *chip,
+ unsigned int offset, int value)
+{
+ struct gpio_desc *desc;
+ struct gpio_chip *gc;
+ struct irq_sim *sim;
+ int curr, irq, irq_type;
+
+ gc = &chip->gc;
+ desc = &gc->gpiodev->descs[offset];
+ sim = &chip->irqsim;
+
+ mutex_lock(&chip->lock);
+
+ if (test_bit(FLAG_REQUESTED, &desc->flags) &&
+ !test_bit(FLAG_IS_OUT, &desc->flags)) {
+ curr = __gpio_mockup_get(chip, offset);
+ if (curr == value)
+ goto out;
+
+ irq = irq_sim_irqnum(sim, offset);
+ irq_type = irq_get_trigger_type(irq);
+
+ if ((value == 1 && (irq_type & IRQ_TYPE_EDGE_RISING)) ||
+ (value == 0 && (irq_type & IRQ_TYPE_EDGE_FALLING)))
+ irq_sim_fire(sim, offset);
+ }
+
+ /* Change the value unless we're actively driving the line. */
+ if (!test_bit(FLAG_REQUESTED, &desc->flags) ||
+ !test_bit(FLAG_IS_OUT, &desc->flags))
+ __gpio_mockup_set(chip, offset, value);
+
+out:
+ chip->lines[offset].pull = value;
+ mutex_unlock(&chip->lock);
+ return 0;
+}
+
+static int gpio_mockup_set_config(struct gpio_chip *gc,
+ unsigned int offset, unsigned long config)
+{
+ struct gpio_mockup_chip *chip = gpiochip_get_data(gc);
+
+ switch (pinconf_to_config_param(config)) {
+ case PIN_CONFIG_BIAS_PULL_UP:
+ return gpio_mockup_apply_pull(chip, offset, 1);
+ case PIN_CONFIG_BIAS_PULL_DOWN:
+ return gpio_mockup_apply_pull(chip, offset, 0);
+ default:
+ break;
+ }
+ return -ENOTSUPP;
+}
+
static int gpio_mockup_dirout(struct gpio_chip *gc,
unsigned int offset, int value)
{
@@ -226,12 +281,8 @@ static ssize_t gpio_mockup_debugfs_write(struct file *file,
size_t size, loff_t *ppos)
{
struct gpio_mockup_dbgfs_private *priv;
- int rv, val, curr, irq, irq_type;
- struct gpio_mockup_chip *chip;
+ int rv, val;
struct seq_file *sfile;
- struct gpio_desc *desc;
- struct gpio_chip *gc;
- struct irq_sim *sim;
if (*ppos != 0)
return -EINVAL;
@@ -244,35 +295,9 @@ static ssize_t gpio_mockup_debugfs_write(struct file *file,
sfile = file->private_data;
priv = sfile->private;
- chip = priv->chip;
- gc = &chip->gc;
- desc = &gc->gpiodev->descs[priv->offset];
- sim = &chip->irqsim;
-
- mutex_lock(&chip->lock);
-
- if (test_bit(FLAG_REQUESTED, &desc->flags) &&
- !test_bit(FLAG_IS_OUT, &desc->flags)) {
- curr = __gpio_mockup_get(chip, priv->offset);
- if (curr == val)
- goto out;
-
- irq = irq_sim_irqnum(sim, priv->offset);
- irq_type = irq_get_trigger_type(irq);
-
- if ((val == 1 && (irq_type & IRQ_TYPE_EDGE_RISING)) ||
- (val == 0 && (irq_type & IRQ_TYPE_EDGE_FALLING)))
- irq_sim_fire(sim, priv->offset);
- }
-
- /* Change the value unless we're actively driving the line. */
- if (!test_bit(FLAG_REQUESTED, &desc->flags) ||
- !test_bit(FLAG_IS_OUT, &desc->flags))
- __gpio_mockup_set(chip, priv->offset, val);
-
-out:
- chip->lines[priv->offset].pull = val;
- mutex_unlock(&chip->lock);
+ rv = gpio_mockup_apply_pull(priv->chip, priv->offset, val);
+ if (rv)
+ return rv;
return size;
}
@@ -418,6 +443,7 @@ static int gpio_mockup_probe(struct platform_device *pdev)
gc->direction_output = gpio_mockup_dirout;
gc->direction_input = gpio_mockup_dirin;
gc->get_direction = gpio_mockup_get_direction;
+ gc->set_config = gpio_mockup_set_config;
gc->to_irq = gpio_mockup_to_irq;
gc->free = gpio_mockup_free;
--
2.23.0
next prev parent reply other threads:[~2019-10-28 7:38 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-28 7:37 [PATCH v4 0/5] gpio: expose line bias flags to userspace Kent Gibson
2019-10-28 7:37 ` [PATCH v4 1/5] gpio: expose pull-up/pull-down line " Kent Gibson
2019-10-28 7:37 ` [PATCH v4 2/5] gpiolib: add support for pull up/down to lineevent_create Kent Gibson
2019-10-31 7:11 ` Bartosz Golaszewski
2019-10-31 7:24 ` Kent Gibson
2019-10-28 7:37 ` Kent Gibson [this message]
2019-10-28 7:37 ` [PATCH v4 4/5] gpiolib: add support for disabling line bias Kent Gibson
2019-10-28 7:37 ` [PATCH v4 5/5] gpiolib: add support for biasing output lines Kent Gibson
2019-10-31 7:10 ` [PATCH v4 0/5] gpio: expose line bias flags to userspace Bartosz Golaszewski
2019-11-04 0:26 ` Linus Walleij
2019-11-04 1:07 ` Kent Gibson
2019-11-04 10:14 ` Bartosz Golaszewski
2019-11-04 11:11 ` Kent Gibson
2019-11-04 11:48 ` Bartosz Golaszewski
2019-11-04 14:22 ` Kent Gibson
2019-11-04 15:20 ` Bartosz Golaszewski
2019-11-04 15:35 ` Kent Gibson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191028073713.25664-4-warthog618@gmail.com \
--to=warthog618@gmail.com \
--cc=bamv2005@gmail.com \
--cc=bgolaszewski@baylibre.com \
--cc=drew@pdp7.com \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).