[PATCH v2 6/7] pinctrl: baytrail: Add GPIO <-> pin mapping ranges via callback

[Andy Shevchenko <andriy.shevchenko@linux.intel.com>]

When IRQ chip is instantiated via GPIO library flow, the few functions,
in particular the ACPI event registration mechanism, on some of ACPI based
platforms expect that the pin ranges are initialized to that point.

Add GPIO <-> pin mapping ranges via callback in the GPIO library flow.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/pinctrl/intel/pinctrl-baytrail.c | 21 ++++++++++++++-------
 1 file changed, 14 insertions(+), 7 deletions(-)

diff --git a/drivers/pinctrl/intel/pinctrl-baytrail.c b/drivers/pinctrl/intel/pinctrl-baytrail.c
index 9ffb22211d2b..b4d0e945e8c2 100644
--- a/drivers/pinctrl/intel/pinctrl-baytrail.c
+++ b/drivers/pinctrl/intel/pinctrl-baytrail.c
@@ -1506,6 +1506,19 @@ static void byt_gpio_irq_init_hw(struct byt_gpio *vg)
 	}
 }
 
+static int byt_gpio_add_pin_ranges(struct gpio_chip *chip)
+{
+	struct byt_gpio *vg = gpiochip_get_data(chip);
+	int ret;
+
+	ret = gpiochip_add_pin_range(&vg->chip, dev_name(&vg->pdev->dev),
+				     0, 0, vg->soc_data->npins);
+	if (ret)
+		dev_err(&vg->pdev->dev, "failed to add GPIO pin range\n");
+
+	return ret;
+}
+
 static int byt_gpio_probe(struct byt_gpio *vg)
 {
 	struct gpio_chip *gc;
@@ -1518,6 +1531,7 @@ static int byt_gpio_probe(struct byt_gpio *vg)
 	gc->label	= dev_name(&vg->pdev->dev);
 	gc->base	= -1;
 	gc->can_sleep	= false;
+	gc->add_pin_ranges = byt_gpio_add_pin_ranges;
 	gc->parent	= &vg->pdev->dev;
 	gc->ngpio	= vg->soc_data->npins;
 	gc->irq.init_valid_mask	= byt_init_irq_valid_mask;
@@ -1534,13 +1548,6 @@ static int byt_gpio_probe(struct byt_gpio *vg)
 		return ret;
 	}
 
-	ret = gpiochip_add_pin_range(&vg->chip, dev_name(&vg->pdev->dev),
-				     0, 0, vg->soc_data->npins);
-	if (ret) {
-		dev_err(&vg->pdev->dev, "failed to add GPIO pin range\n");
-		return ret;
-	}
-
 	/* set up interrupts  */
 	irq_rc = platform_get_resource(vg->pdev, IORESOURCE_IRQ, 0);
 	if (irq_rc && irq_rc->start) {
-- 
2.24.0.rc1